• Title/Summary/Keyword: passive sampler

Search Result 136, Processing Time 0.033 seconds

Characteristics of PCDD/Fs Deposited on Pine Needles (소나무잎에 침착된 PCDD/Fs 특성)

  • Chun, Man-Young
    • Journal of Korean Society of Environmental Engineers
    • /
    • v.27 no.6
    • /
    • pp.599-605
    • /
    • 2005
  • The characteristics of PCDD/Fs were studied when accumulating on 1 to 4 year old pine needles that were used as passive samplers of atmospheric POPs. The rate of concentration increase was linear in lower(tetra- through hexa-) chlorinated PCDD/Fs, but higher (hepta- and octa-) chlorinated homologue concentrations did not increase with needle age. The lower were in gas phase and the higher in particles. Photodegradation rates of PCDDs on pine needles were similar to PCDFs, higher chlorinated PCDD/Fs tend to photolyze quickly. Therefore it is recommended that the younger needles should be collected to avoid errors from the depositional accumulation rates and photodegradation, and that, when comparing local concentrations of PCDD/Fs, needles of same age should be collected to reduce the errors.

A Study on Organic Solvent Measurement Using Diffusive Sampler (확산포집기를 이용한 공기 중 유기용제 포집에 관한 연구)

  • Park, Mi Jin;Yoon, Chung Sik;Paik, Nam Won
    • Journal of Korean Society of Occupational and Environmental Hygiene
    • /
    • v.4 no.2
    • /
    • pp.208-223
    • /
    • 1994
  • The purpose of this study was to evaluate the efficiency of diffusive(or passive) sampler in measuring airbone organic solvents. Diffusive samplers are generally simple in construction and do not require power for operation. The efficiency of the diffusive samplers has not sufficiently been investigated in Korea. Three types of samplers were studied in this study. The sampling and analytical results by passive samplers were compared with results by charcoal tube method recommended by NIOSH(National Institute for Occupational Safty and Health). The following characteristics are identified and studied as critical to the performance passive monitors; recovery, reverse diffusion, storage stability, accuracy and precision, face velocity and humidity, n-Hexane, TCE(trichloroethylene) and toluene were used as test vapors. A dynamic vapor exposure system consisting of organic vapor generator and sampling chamber for evaluating diffusive samplers are made. The results of the study are summarized as follows. 1. NIOSH recommands that the overall accuracy of a sampling method in the range of 0.5 to 2.0 times the occupational health standard should be ${\pm}25$ percent for 95 percent confidence level. Among three types of diffusive samplers, sampler A has permeation membrane and samplers Band C have diffusive areas, samplers A and B met the criterion that overall accuracy for 95% confidence level of the samplers were within ${\pm}25$ percent of the reference value. Sampler C had overall accuracy ${\pm}9.6%$ and ${\pm}11.8%$ in hexane and TCE, respectively. The concentration of toluene was overestimated in sampler C with overall accuracy of ${\pm}43.9%$. 2. The desorption efficiencies of diffusive samplers were 96-107%. 3. There was no significant sampe loss during four weeks of storage both with and without refrigeration. 4. There was no significant reverse diffusion, when the samplers were exposure to clean air for 2 hours after sampling for 2 hours at the level of 2 TLY. 5. In case of 8 hours sampling, relative differences(RD) of concentrations between charcoal tube method and diffusive method were 15-39%, 13-46%, and 4-35% for sampler A, B and C, respectively. The performance was poor in 8 hours sampling for multiple substance monitors. 6. At high velocity(100 cm/sec), samplers B and C overestimated the concentrations of organic vapors, and sampler A with permeation membrance gave better results. 7. At 80% relative humidity, samplers showed no siginificant effect. Low humidity also did not affect the diffusive samplers.

  • PDF

Application of Passive Sampler in Validation and Calibration of Air Dispersion Model (대기확산모델의 검정 및 보정을 위한 Passive Sampler의 활용)

  • 김선태;김주인;김성근;배장영
    • Proceedings of the Korea Air Pollution Research Association Conference
    • /
    • 1999.10a
    • /
    • pp.170-171
    • /
    • 1999
  • 대기 중 오염물질의 확산 및 미래의 예측을 위하여 대기확산모형을 많이 사용하고 있으며, 국내에서 사용하고 있는 대기확산모형의 대부분은 미국 EPA에서 보급하는 것을 사용하고 있다. 이 중에서 최근에 많이 사용하고 있는 단기모형으로는 기간과 지형이 고려되는 ISCST3 모형을 들 수 있다. 국내 모델의 사용에 있어서 가장 중요한 문제점은 모델의 검정과 보정을 위한 data의 부재를 들 수 있다.(중략)

  • PDF

A Fundamental Experiment of $NH_3$ Analysis Using Passive Sampler (Passive Sampler를 이용한 암모니아측정에 대한 기초실험)

  • 김학만;이범진;김선태
    • Proceedings of the Korea Air Pollution Research Association Conference
    • /
    • 2000.04a
    • /
    • pp.340-341
    • /
    • 2000
  • 환경부에서 규제하고 있는 악취규제물질 중 자극적이며 화장실에서 나는 냄새와 유사한 성격을 가진 암모니아는 식품 및 화학공장 둥의 산업시설은 물론 환경기초시설, 대규모 농수산시장 등에서 발생하여 생활환경에서 빈번하게 감지할 수 있는 대표적인 악취유발물질의 하나이다. 이러한 암모니아를 분석할 수 있는 방법은 피리딘-피라졸론법, 네슬러법, 인도페놀법, CG-FTD법 둥 여러 실험방법이 제안되고 있으나 공기를 강제적으로 흡입하여 붕산흡수액과 접촉시켜 암모니아를 채취하고, 발색시약과의 반응에 의해 생성되는 푸른색의 인도페놀을 측정하여 암모니아를 정량하는 인도페놀법이 가장 광범위하게 이용되고 있다. (중략)

  • PDF

The measurement of $NO_2$, $SO_2$ by Passive sampler in industrial complex (Passive sampler를 이용한 공단 지역의 $NO_2$, $SO_2$ 측정)

  • 김성근;손찬웅;김선태;인치경
    • Proceedings of the Korea Air Pollution Research Association Conference
    • /
    • 2000.04a
    • /
    • pp.125-126
    • /
    • 2000
  • 현재 공단지역에서 발생하는 오염물질을 파악하기 위해서는 오염물질이 배출되는 곳에 TMS를 설치하거나 측정하고자 하는 지점에 습식법을 이용하여 오염물질을 측정하는 방법이 사용되고 있다. 하지만 이러한 TMS나 습식법을 이용하여 오염물질을 측정하기 위해서는 고가의 설치비나 인력 장비 문제로 인하여 동시에 여러 지역을 측정하기 어렵다는 단점을 가지고 있으며, 특히 공단 지역과 같은 특수한 지역의 오염물질의 경향을 파악하기 위해서는 더욱 그러하다. (중략)

  • PDF

Analysis of the NO$_2$ Cconcentration Trend by the Volume of Traffic Using Passive Sampler (Passive sampler를 활용한 교통량에 따른 이산화질소 농도경향 분석)

  • 이범진;김선태
    • Proceedings of the Korea Air Pollution Research Association Conference
    • /
    • 2003.11a
    • /
    • pp.126-127
    • /
    • 2003
  • 서울의 시정장애 현상은 80년 이후부터 계속 심화되고 있어 ‘서울 스모그’라는 새로운 용어를 탄생시키기에 이르렀다. 서울 스모그 발생은 가정용 연료의 연소와 노천소각에 의한 일부 원인과 함께, 대부분은 자동차 배출물질에 의해 유발되는 광화학 스모그는 미세한 입자상 물질에 의해 복합적으로 나타나는 것으로 알려져 있다. 서울지역의 자동차로부터 배출되는 오염비중은 1991년 54.4%에서 매년 증가하며 1997년부터 85%를 넘어섰다. (중략)

  • PDF

Performance Evaluation of a Passive sampler for ambient Ozone by Chamber test (Chamber test를 통한 대기환경 중 오존 측정을 위한 Passive sampler의 성능 평가)

  • 박민수;우진춘;김선태
    • Proceedings of the Korea Air Pollution Research Association Conference
    • /
    • 2001.11a
    • /
    • pp.243-244
    • /
    • 2001
  • 오존(O$_3$)은 성층권에서 태양광의 직접 지구 입사를 감소시키는 반면, 일반 대기 환경에서는 강력한 산화성과 더불어 최근 NOx, VOCs와의 연계성이 점차 밝혀지면서 최근 대기질 환경에 주요관심사가 되고 있다. 또한 지난 2000년 12개 도시에 52회의 0.3ppm이상의 고농도 오존 경보 발령으로 관리에 초점이 맞춰지고 있으나, 대기환경 중에서 자외선 등에 의한 2차 생성물질인 오존은 강력한 산화성으로 인해 표준물질이 없어 정확한 측정 및 관리에 어려움을 겪고 있다. (중략)

  • PDF

The Comparison of $VOC_s$ Concentration in Several Industrial Complex Using Passive Sampler (Passive Sampler를 활용한 공업단지별 $VOC_s$ 농도 비교)

  • 정의석;인치경;박민수;김선태
    • Proceedings of the Korea Air Pollution Research Association Conference
    • /
    • 1999.10a
    • /
    • pp.141-142
    • /
    • 1999
  • 차량의 증가와 각종 산업분야에서의 유기용제 사용에 따른 VOC 물질의 증가는 발암성과 관련된 환경보건 및 오존의 전구물질 등 기타 복잡한 대기화학과도 긴밀하게 연루되어 있다. 또한, VOC는 공단지역에서 지역주민에게 악취를 유발시키는 있어 악취와 건강보건에 있어서 집중적인 관리가 요구된다고 하겠다.(중략)

  • PDF

Evaluation of Badge-Type Diffusive Sampler Performance for Measuring Indoor Formaldehyde

  • Yim, Bongbeen;Lee, Kyusung;Kim, Jooin;Hong, Hyunsu;Kim, Suntae
    • Environmental Engineering Research
    • /
    • v.18 no.3
    • /
    • pp.123-128
    • /
    • 2013
  • The purposes of this study were to determine the efficiency of using a badge-type diffusive sampler to measure formaldehyde concentrations indoors, and to evaluate the uncertainty associated with the use of data from a diffusive sampler. A diffusive sampler using 2,4-dinitrophenylhydrazine (DNPH) reagent was found to be a suitable tool for measuring the formaldehyde concentration in an indoor environment. The agreement between results of the diffusive sampler and DNPH cartridge were good, showing a correlation coefficient of 0.996. The sampling rate for the diffusive sampler was calculated to be 1.428 L $hr^{-1}$, with a standard deviation of 0.084 L $hr^{-1}$. It was found through analysis that the uncertainty associated with the sampling rate and the mass of the formaldehyde transported into the diffusive sampler by diffusion was the dominant contributor to the total.