• 한국건축시공학회지
• /
• 제15권3호
• /
• pp.273-280
• /
• 2015

본 연구는 3시간 내화성능을 만족할 수 있는 고성능 무내화피복 CFT 기둥 개발을 위한 연구로서, 고로슬래그 미분말 치환율에 따른 성능평가를 실시한 결과 고로슬래그 미분말 치환율이 증가함에 따라 내화성능이 개선되는 것을 확인 할 수 있었으며, 내화성능을 고려한 CFT 기둥용 100MPa 충전콘크리트의 고로슬래그 미분말 적정 사용량은 40%로 나타났다. 이에 따라 고로슬래그 미분말 40% 혼입 100MPa 충전콘크리트를 적용한 CFT 실물 시험체를 대상으로 재하하중별 내화시험을 실시한 결과 재하하중이 증가함에 따라 내화성능 발현시간이 감소하는 것으로 나타났으며, 재하하중 2,000kN에서는 240분 이상의 내화성능을 나타내었고, 3,000kN에서는 184분, 4,000kN에서는 120분의 내화성능을 나타내었다.

• 한국건축시공학회지
• /
• 제18권3호
• /
• pp.211-218
• /
• 2018

이 연구에서는 국내산 인공 경량골재를 사용한 콘크리트의 실험결과를 바탕으로 콘크리트 표준시방서의 관련내용에 대한 합리성 및 개정의 필요성을 평가하였다. 국내 표준시방서의 내용은 ACI 211.2, ACI 213, ACI 301, JASS 5 및 CEB-FIP 시방내용들과 비교하였다. 국내산 인공 경량 잔골재의 연속적 입도분포를 위해서는 최대직경 2.5mm 이하의 천연모래 혼입이 요구되었다. 경량골재 콘크리트의 재료분리 및 과도한 블리딩을 제어하기 위해서는 현재 시방서에서 제시된 최대 물-결합재비와 단위수량에 대한 수정이 요구되었다. 특히, 배합 목표성능인 초기 슬럼프, 28일 압축강도, 공기량 및 기건 단위용적중량에 대해 경량골재 콘크리트의 합리적인 배합설계 절차의 확립이 요구되었다. 결과적으로 콘크리트 표준시방서는 국내산 인공 경량골재의 특성을 고려하여 전반적이 개정이 요구되었다.

• Journal of the Korean Wood Science and Technology
• /
• 제22권2호
• /
• pp.37-45
• /
• 1994

The possibility of reusing the paper sludge as a raw material of composition board mixed with cement was investigated. For the measurement of physical and mechanical properties, wood coment board and sludge combinend cement boards were fabricated with the three weigh ratios of paper sludge 10 % (SI), 20 % (S II) and 30 % (S III) to cement weight. For adding the cement hardning, $CaCl_2$ was also added to each mixed paste with the ratio of 1 %, 3 % and 5 % to cement weight, respectively. Crystal formation in paper sludge-, wood-cement composites was observed by scanning electron microscope. The results were summarized as follows. 1. Density and partial compressive strength of each specimens were relatively high in the order of sludge I, sludge II, Korean pine, Italian poplar and sludge III, sludge I, Korean pine, sludge II, Italian poplar and sludge III. 2. The mechanical properties of sludge-cement boards (S I and II) were higher than that of wood-cement boards prepared with Korean pine and Italian poplar. But the mechanical properties of wood-cement boards were improved by the adding of $CaCl_2$. 3. Water absorption and thickness swelling were increased with increase of sludge content to cement weight. 4. In SEM observation, sludge-cement composites showed sufficiently formed crystals but wood-cement composites showed poorly formed crystals.

• Journal of the Korean Wood Science and Technology
• /
• 제21권2호
• /
• pp.57-65
• /
• 1993

The aim of this research was to manufacture sludge-particle board using paper sludge with wood particle and to investigate physical and mechanical properties of various sludge-particle boards, fabricated with ratios of sludge to particle of 10 to 90, 20 to 80, 30 to 70, 40 to 60 and 50 to 50(oven dry weight based). Sludge-particle boards were manufactured by urea-formaldehyde resin, 0.8 target specific gravity, and 10mm thickness. It was possible to manufacture sludge-particle board as the same processing in the present particleboard manufacturing system. This sludge-particle board have different properties as composition ratios of sludge and particle. And sludge-particle board made from 10 percent to 20 percent of sludge mixing ratio have similar mechanical properties compared with control particleboard. Especially, the sludge-particle board made from 10 percent to 40 percent mixing ratios of sludge have superior to control particleboard in internal bond, screw withdrawal holding strength and modulus of elasticity. In the case of dimensional stability, water absorption was increased and thickness swelling was decreased as increased with sludge mixing proportion. The sludge-particle board made of different mixing ratios of our laboratory design was able to concluded that there is possibility of partial substitution of wood particle materials.

• 한국재료학회지
• /
• 제25권3호
• /
• pp.138-143
• /
• 2015

Aluminum nitride, a compound semiconductor, has a Wurtzite structure; good material properties such as high thermal conductivity, great electric conductivity, high dielectric breakdown strength, a wide energy band gap (6.2eV), a fast elastic wave speed; and excellent in thermal and chemical stability. Furthermore, the thermal expansion coefficient of the aluminum nitride is similar to those of Si and GaAs. Due to these characteristics, aluminum nitride can be applied to electric packaging components, dielectric materials, SAW (surface acoustic wave) devices, and photoelectric devices. In this study, we surveyed the crystallization and preferred orientation of AlN thin films with an X-ray diffractometer. To fabricate the AlN thin film, we used the magnetron sputtering method with $N_2$, NH3 and Ar. According to an increase in the partial pressures of $N_2$ and $NH_3$, Al was nitrified and deposited onto a substrate in a molecular form. When AlN was fabricated with $N_2$, it showed a c-axis orientation and tended toward a high orientation with an increase in the temperature. On the other hand, when AlN was fabricated with $NH_3$, it showed a-axis orientation. This result is coincident with the proposed mechanism. We fabricated AlN thin films with an a-axis orientation by controlling the sputtering electric power, $NH_3$ pressure, deposition speed, and substrate temperature. According to the proposed mechanism, we also fabricated AlN thin films which demonstrated high a-axis and c-axis orientations.

• 디지털융복합연구
• /
• 제17권5호
• /
• pp.217-223
• /
• 2019

자동차 분야에서 저항 점용접의 결함 및 품질을 실시간으로 예측할 수 있는 연구는 원가절감과 고품질 생산을 위한 필수 불가결한 연구 분야라 할 수 있다. 용접 품질은 전단강도와 너깃의 크기에 의해서 결정되며 여러 가지 독립변수에 따라 결과가 달라진다. 실시간 예측시스템을 개발하기 위하여 다중 회귀분석을 실시하여 3개의 독립변수로 두 가지 종속변수를 충분한 통계적 결과로 구하였으나 회귀식에 의한 품질 예측은 정확도를 보장할 수 없었다. 본 연구에서는 다층 신경망 회로를 구축하였다. 10가지의 동저항 변수에 의한 신경망은 3개의 은닉층을 구축하여 실행 함수와 가중치 행렬을 구하였다. 그러나 이 경우, 입력 변수가 너무 많아 실시간 제어에 어려움이 있을 수 있으므로 회귀분석에 의한 3개의 독립변수로 신경망을 구축하였다. 그 결과 모든 시험데이터를 불량, 부분 불량, 양품으로 구분하는데 성공하였다. 따라서 다중 회귀분석에 의해서 구한 3개의 독립변수에 의한 실시간 용접 품질 판정 시스템을 완성할 수 있었다.

• 대한정형외과학회지
• /
• 제55권3호
• /
• pp.276-280
• /
• 2020

49세 남자 환자가 숙박업소에서 의식을 잃은 채 발견되어 응급실로 내원하였다. 환자는 조현증 및 주요우울증으로 항정신병 약물 및 항우울증 약물(vortioxetine hydrobromide, mirtazapine, sertraline hydrochloride, quetiapine, alprazolam)을 복용 중이었으며 환자 주변에 상기 약물들을 과량 복용한 흔적이 남아있었다. 신체검사에서 좌측 둔부 및 가측 대퇴부로 동통, 창백 및 부종 관찰되었으며 좌측 족관절 이하의 능동 관절운동이 불가하였다. 그리고 경골 및 비골신경 영역의 감각이 소실되어 있었다. 가장 종창이 심했던 가측 대퇴부에서 측정한 둔부 구획 내 압력은 42 mmHg 이었으며 자기공명영상에서 좌측 둔부 근육 및 주변 연부 조직의 부종 및 고강도 신호를 보이고 있었다. 응급 근막절개술을 시행하였고 24시간 이후 하지 감각 및 근력이 일부 회복되었다.

• Asia Marketing Journal
• /
• 제18권2호
• /
• pp.63-93
• /
• 2016

As one of the most popular forms of electronic commerce, cross-border e-commerce provides numerous consumer benefits, such as broad and deep product assortments at low prices. However, consumers tend to exhibit high involvement in cross-border e-commerce purchases due to high risks associated with such purchases. The paper focuses on identifying causal relationships between e-commerce website traits (i.e., website trustworthiness, interactivity and convenience) and consumer satisfaction and along with loyalty. We proposed a reflective-reflective hierarchical model (first-order reflective and second-order reflective model) and used the Partial Least Square Analysis Statistical method to test the hypotheses. The results demonstrated that website trustworthiness, convenience and interactivity were all positively related to consumer satisfaction. Also, higher satisfaction led to stronger customer loyalty, which may well increase revisit intentions. We also compared the strength of each path from a website trait to satisfaction. Results illustrated that the path from website convenience to satisfaction is the strongest among the three website traits. In addition, we separately examined differences within Korean group and Chinese group. No statistically significant difference among website traits was found within Korean group. However, within Chinese group, we found that website convenience is the most important predictor of satisfaction. This indicates that Chinese consumers are more concerned about the website convenience than interactivity and trustworthiness when they make cross-border e-commerce purchases. Moreover, this study investigated possible differences between Korean and Chinese group. We used multi-group analysis of Smart PLS 3.0 to test the results. It was shown that the two groups do not display statistically significant difference in trustworthiness, interactivity, or convenience in influencing customer satisfaction. Finally, we presented further implications which are useful for understanding of the proposed model. Limitations and improvements of this research were presented, too.

• 한국구조물진단유지관리공학회 논문집
• /
• 제27권2호
• /
• pp.1-7
• /
• 2023

기존 신축이음장치 교체 시간을 절감하고, 차선별 부분교체가 가능하도록 보수성을 개선한 신축이음장치 시스템(HRS)에 대하여 실물규모의 수직하중 피로시험과 윤하중 성능실험을 수행하여 내구성을 평가하였다. 수직하중 피로시험결과 레일형 신축이음장치의 최대응력은 170 Mpa이며, 이는 HRS 신축이음장치레일의 항복강도 355MPa의 약 47.8% 수준이다. 보수성을 개선한 HRS 신축이음장치의 수직하중 피로시험은 도로교설계기준에 따라 재하판의 크기와 하중을 설정하였고, 200만회 수직하중 피로시험과 윤하중 성능실험에 있어서 파괴거동을 나타내지 않았으며 그 내구성과 안전성을 확인하였다.

• 한국작물학회:학술대회논문집
• /
• 한국작물학회 2022년도 추계학술대회
• /
• pp.203-203
• /
• 2022

A new winter wheat(Triticum aestivum L.) cultivar "Hwanggeumal" was developed by the NICS(National Institute of Crop Science), RDA(Rular Dvelopment Administraion) in 2019. It was derived from a cross of the "Jokyoung//Kauz/Rayon" and "Jopoom" in 2008. It had advanced generation through bulk and pedigree method for seven years and designated line name "Jeonju398" after AYT(Advance Yield Trial) test for two years. And "Hwangeumal" was designated variety name after RYT(Regional Yield Trial) test in eight locations around Korea for two years from 2018 to 2019. Its heading date was April 19 and maturity date was May 31, which were similar to Jokyoung. "Hwanggeumal" had shorter plant height(75 cm) and spike length(7.1 cm), spikes per m²(699) and lower 1,000 grain weight(44.2 g) than "Jokyoung"(78 cm, 8.2 cm, 776, 46.6 g, respectively). "Hwanggeumal" was showed weak to winter hardiness and susceptible to powdery mildew but tolerance to PHS(Pre-harvest sprouting). The average grain yield in the AYT was 6.2 ton/ha, which were 10% more than "Jokyoung" And in the RYT was 5.1 ton/ha in upland and 4.4 ton/ha in paddy field, which were lower than "Jokyoung", respectively. "Hwanggeumal"s flour yield (71.4%) and flour lightness (91.82) showed similar to "Jokyung" and higher protein content (14.0%) and gluten content (10.3%) and SDS-sedimentation volume (60.3ml). These result showed that the "Hwanggeumal" dough strength of flour is strong than "Jokyung". "Hwanggeumal"s HMW-GS(High molecular weight gluten subunits) composition are Glu-D1 (5+10), Granule-bound starch synthase(GBSS) composition are Wx-A1 (a), Wx-B1 (b), Wx-D1 (a) and composition of Puroindolines are Pina-D1(a), Pinb-D1(b).