• 비파괴검사학회지
• /
• 제36권5호
• /
• pp.353-362
• /
• 2016

가스터빈 블레이드는 고온 고압의 환경 아래 장시간 가동하기 위하여 초합금 모재에 세라믹 코팅으로 이루어진 열차폐코팅(thermal barrier coating, TBC)은 필수요소이다. 하지만 TBC 또한 가스터빈 가동 중 일정 열화온도 및 가동시간에서 top coat의 박리현상이 일어난다. TBC의 박리는 블레이드의 손상과 직결되므로 가스 터빈의 안정적인 가동을 위해서 TBC의 박리 평가가 선행되어야 한다. 기존 비파괴평가 기법 연구는 산화알루미늄층(thermally grown oxide, TGO)의 생성 유무 또는 완전 박리의 정성적 평가가 이루어져 왔다. 본 연구에서는 TBC 박리를 정량적으로 평가하기 위해 초음파검사의 C-scan기법을 이용한 TBC의 부분박리손상 map을 구현하였다. 시편들은 $1,100^{\circ}C$로 등온열화하여 각각 열화시간을 변화시킨 시편들을 사용하였다. 단일 탐촉자를 이용한 펄스-에코법으로 C-scan을 수행하였고 TBC 내 부분박리를 검출하기 위해 초음파를 수침법으로 시편에 수직 탐상하였다. 그리고 Rogers-Van Buren과 Kim의 이론 반사식을 이용하여 부분박리영역 지름이 1 mm부터 6 mm까지 부분박리지수를 도출했다. 이를 적용하여 각 부분박리지수에 따른 부분박리 손상 map을 영상화하였다. TBC는 열화시간이 증가할수록 부분박리지수에 관계없이 부분박리영역이 모두 증가함을 확인할 수 있었다. 또한 단일 시편 내에서 부분박리지수가 증가할수록 부분박리영역이 감소하는 것을 확인하였다. 부분박리손상 map의 부분박리영역에 따른 분포를 이용하여 TBC의 완전박리 기준과 잔여 수명을 또한 도출할 수 있었다.

• Smart Structures and Systems
• /
• 제19권1호
• /
• pp.91-103
• /
• 2017

Generalized fractal dimension is used to detect the presence of partial delamination in a composite laminated beam. The effect of boundary conditions and location of delamination on the fractal dimension curve is studied. Appropriability of higher mode shape data for detection of delamination in the beam is evaluated. It is shown that fractal dimension measure can be used to detect the presence of partial delamination in composite beams. It is found that the torsional mode shape is well suited for delamination detection in beams. First natural frequency of delaminated beam is found to be higher than the healthy beam for certain small and partial width delaminations and some boundary conditions. An explanation towards this counter intuitive phenomenon is provided.

• 대한영상의학회지
• /
• 제82권6호
• /
• pp.1366-1387
• /
• 2021

회전근개 부분 파열의 자기공명영상 해석은 종종 애매한 경우가 있다. 이 종설에서는 회전근개 중 극상건과 극하건에 초점을 맞춰, 회전근개 부분 파열의 진단을 위한 해부학적 고려 사항을 설명하고, 회전근개 부분 파열의 분류를 요약하며, 박리(delamination)가 포함된 회전근개 부분 파열의 최신 개념을 개략적으로 설명하였다.

• 오토저널
• /
• 제14권5호
• /
• pp.107-116
• /
• 1992

Recently, it is gradually raised necessity that interface is measured accurately and managed in industrial circle and medical world. An Ultrasonic wave transmitted from a focused beam tranducer is being expected as a powerful tool for NDE of the delamination. The Ultrasonic NDE of the delamination is based on the form of the wave reflected from the interface. In this study results, automatically repeated discrimination analysis method can be devided in the category of all kinds of defects on semiconductor package, and also can be possible to have a sampling of partial delamination.

• 한국초전도학회:학술대회논문집
• /
• 한국초전도학회 2009년도 Korea Superconductivity Society Meeting 2009
• /
• pp.99-99
• /
• 2009

• 비파괴검사학회지
• /
• 제12권4호
• /
• pp.18-25
• /
• 1993

This paper is to aim the microdefect evaluation of If package into a quantitative from NDI's image processing of ultrasonic wave. (1) Automatically repeated discrimination analysis method can be devided in the category of all kind of defects on IC package, and also can be possible to have a sampling of partial delamination. (2) It is possible that the information of edge section in silicon chip surrounding can be extractor by the partial image processing of IC package. Also, the crack detection is possible between the resin part and lead frame.

• 대한전기학회논문지
• /
• 제45권2호
• /
• pp.294-300
• /
• 1996

In hydro-generator, a groundwall insulation of stator windings gradually deteriorates due to mechanical, thermal, electrical and environmental stresses. These stresses combine to result in loose windings, delamination of the stator insulation and/or electrical tracking of the endwinding, all of which can lead to stator insulation failures. Conventionally, off-line tests such as partial discharge measurement, DC/AC current and .DELTA.tan.delta. tests has been used for estimation of winding condition. However, off-line test requires large power supply and generator outage. In addition, major cause of insulation problems such as loose wedges and slot dischages may not be found with off-line diagnoses. This paper introduces the on-line partial discharge measurement techniques using frequency spectrum analyzer(FSA) for the generator stator windings. The experimental results from the UIAM #1 hydro-generator confirms a optimistic application of on-line generator diagnosis method as a reliable tool for evaluation of winding condition.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1993년도 하계학술대회 논문집 B
• /
• pp.584-587
• /
• 1993

Mica, which have a good thermal and electrical characteristics, while will cleave easily at these layers. In order to bond mica materials soldily, mica/epoxy composite insulation materials were developed for generator stator winding. There are lots of problems such as delamination and partial discharge of these insulation materials caused by mechanical, electrical and thermal aging. Several experiments have been conducted in order to find the useful diagnostic parameters from the partial discharge phenomena by applying a new measurement techniques. this paper deals with the partial discharge pulse characteristics, which may be a useful diagnostic concept in predicting insulation condition of generator stator insulation materials. Long term insulation aging test shows that partial discharge phase angle an magnitude are identified as one of the main key techniques for insulation diagnosis on generator stator winding.

• Journal of information and communication convergence engineering
• /
• 제22권3호
• /
• pp.231-236
• /
• 2024

This paper presents a method used to identify partial discharge defects in cast-resin power transformers using a back-propagation algorithm. The Rogowski-type partial discharge (PD) sensor was designed with a planar and thin structure based on a printed circuit board to detect PD signals. PD electrode systems, such as metal protrusions, particle-on-insulators, delamination, and void defects, were fabricated to simulate the PD defects that occur in service. PD characteristics, such as rising time, falling time, pulse width, skewness, and kurtosis without phase-resolved partial discharge patterns, were extracted to intuitively analyze each PD pulse according to the type of PD defect. A backpropagation algorithm was designed to identify PD defects using a virtual instrument (VI) based on the LabVIEW program. The results show that the accuracy rate of back-propagation (BP) algorithm reaches over 92.75% in identifying four types of PD defects.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제49권3호
• /
• pp.186-195
• /
• 2000

In this paper, partial discharge (PD) measurement was performed to evaluate the quality of the cable joint and termination constructions. The resistive coupling technique for PD detection using resistivity of semiconducting layer of the cable in the accessories, such as joints and terminations. With high frequency PD (HEPD) measurement, an excellent sensitivity below 20pC could be achieved under unshielded condition. The localization of the defects in the accessories could be identified. During heating cycle, PDs were monitored and analyzed. At that time, the PDs were dependent on the temperature of the heating cycle and showed cyclic behaviors, which were attributed to local delamination of the interfaces, between epoxy unit and stress relief cone(SRC) and between SRC and cable, due to the difference of thermal expansion. As a conclusion, HFPD measurement technique was proven to be an effective diagnostic method for qualification of extra high voltage (EHV) cable accessories. With this technique, the optimal design of the components of the accessories could be verified not only in an early stage but also under operating condition. This technique would result in the improvement of the reliability of the EHV cable accessories.