• 제목/요약/키워드: partial correlation coefficients

검색결과 143건 처리시간 0.024초

ppcor: An R Package for a Fast Calculation to Semi-partial Correlation Coefficients

  • Kim, Seongho
    • Communications for Statistical Applications and Methods
    • /
    • 제22권6호
    • /
    • pp.665-674
    • /
    • 2015
  • Lack of a general matrix formula hampers implementation of the semi-partial correlation, also known as part correlation, to the higher-order coefficient. This is because the higher-order semi-partial correlation calculation using a recursive formula requires an enormous number of recursive calculations to obtain the correlation coefficients. To resolve this difficulty, we derive a general matrix formula of the semi-partial correlation for fast computation. The semi-partial correlations are then implemented on an R package ppcor along with the partial correlation. Owing to the general matrix formulas, users can readily calculate the coefficients of both partial and semi-partial correlations without computational burden. The package ppcor further provides users with the level of the statistical significance with its test statistic.

P-value calculation methods for semi-partial correlation coefficients

  • Kim, Seongho
    • Communications for Statistical Applications and Methods
    • /
    • 제29권3호
    • /
    • pp.397-402
    • /
    • 2022
  • The mathematical expression of the p-value calculation for the semi-partial correlation coefficient differs between Kim (2015) and Cohen et al. (2003). These two expressions were compared and the advantages of Kim (2015)'s approach over Cohen et al. (2003) were discussed.

Comparison of High Frequency Detailed Generator Models for Partial Discharge Localization

  • Hassan Hosseini, S.M.;Hosseini Bafghi, S.M.
    • Journal of Electrical Engineering and Technology
    • /
    • 제10권4호
    • /
    • pp.1752-1758
    • /
    • 2015
  • This paper presents partial discharge localization in stator winding of generators using multi-conductor transmission line (MTL) and RLC ladder network models. The high-voltage (HV) winding of a 6kV/250kW generator has been modeled by MATLAB software. The simulation results of the MTL and the RLC ladder network models have been evaluated with the measurements results in the frequency domain by applying of the Pearson’s correlation coefficients. Two PD generated calibrator signals in kHz and MHz frequency range were injected into different points of generator winding and the signals simulated/measured at the both ends of the winding. For partial discharge localization in stator winding of generators is necessary to calculate the frequency spectrum of the PD current signals and then estimate the poles of the system from the calculated frequency spectrum. Finally, the location of PD can be estimated. This theory applied for the above generator and the simulation/measured results show the good correlation for PD Location for RLC ladder network and MTL models in the frequency range of kHz (10kHz<f<1MHz) and MHz (1MHz<f<5MHz) respectively.

시중 즉석 조리 면의 Back Extrusion 텍스처 데이터에 대한 Partial Least Square Regression 분석 (Analysis of Partial Least Square Regression on Textural Data from Back Extrusion Test for Commercial Instant Noodles)

  • 김수경;이승주
    • 산업식품공학
    • /
    • 제14권1호
    • /
    • pp.75-79
    • /
    • 2010
  • 시중 즉석 면류의 관능적 성질과 back extrusion test 데이터에 대하여 partial least square regression(PLSR)을 실시하였다. 즉석유탕면 8종과 즉석비유탕면 2종에 대한 관능적 속성으로서 경도(A), 탄성(B), 껄끄러운 정도(C), 이에 박히는 정도(D), 굵기감(E)를 검사하였고, 실험 데이터로 힘-변형 곡선 전체를 사용하였다. PLSR의 회귀계수는 힘-변형곡선의 압착단계, 항복단계, 압출단계로 크게 구분되어 각관능속성에 대한 특유의 양 또는 음의 효과를 나타냈다. PLSR의 상관계수는 E>D>A>B>C, 오차(root mean square error of prediction expressed in sensory units)는 D>C>E>B>A, 예측능(relative ability of prediction)는 D>C>E>B>A 로 나타나 종합적으로 '이에 박히는 정도'가 PLSR의 적용에 가장 우수하게 나타났다. '경도'는 예측능은 낮았지만 상관성은 높아서 시료간 순위의 결정에 합당하게 평가되었다.

Real Effect of pH on CIE L*, a*, and b*, of Loins during 24 h Chilling of Beef Carcasses

  • Min, J.S.;Kim, I.S.;Yoon, Y.T.;Lee, M.
    • Asian-Australasian Journal of Animal Sciences
    • /
    • 제15권2호
    • /
    • pp.279-282
    • /
    • 2002
  • Twenty six male Hanwoo (Korean cattle) carcasses were measured for pH, temperature and instrumental color changes of loins during 24 h post-mortem carcass chilling at $4^{\circ}C$ in the cooler. The average internal temperature of loins was about $5^{\circ}C$ after 24 h of chilling, and with the exclusion of those with an ultimate pH>6.0 (dark-cutters), the average pH value was 5.5. When all carcasses were considered for the partial correlation coefficient between color and pH, with the temperature effect excluded, CIE $L^*$, $a^*$ and $b^*$ seemed to be affected significantly by pH during chilling process (p<0.001). However, when carcasses with dark-cutting condition were excluded, the correlation coefficients were much lower. In contrast, when the partial correlation coefficients between color and temperature, excluding the effect of pH on them, were analyzed, the relationship between color and temperature did not change much after values of DFD (dark, firm, dry) beef were excluded. The results suggested that the known interrelationship of color and pH in chilled beef loins be mainly due to the influence of temperature on pH and color.

푸리에 변환 근적외선 분광분석기(FT-NIR)와 적분구를 이용한 근대 한지 기록물의 산성도 비파괴 평가방법에 대한 연구 (The study of nondestructive method for measuring the acidity of the recent record paper in Hanji by using FT-NIR spectroscopy and Integrating sphere)

  • 신용민;박성배;김찬봉;이성욱;조원보;김효진
    • 한국펄프종이공학회:학술대회논문집
    • /
    • 한국펄프종이공학회 2011년도 추계학술발표회 논문집
    • /
    • pp.255-269
    • /
    • 2011
  • 본 연구에서는 1900년대 이후 근대 한지로 작성된 기록물의 상태를 가능한 빠르게 확인할 수 있는 도구를 연구하고자 비파괴적인 방법으로 분석을 실시하였다. 종이 기록물의 경우 그 자체가 원본임으로 파괴적인 방법으로 분석할 수 없는 한계를 극복하고자 원본을 파괴하지 않고 상태를 확인할 수 있는 방법을 개발하는 것이 본 연구의 목적이다. 본 연구 목적에 적합한 비파괴 분석을 위해 근적외선 분석 장비 중에서 정밀도와 정확도가 좋은 푸리에 변환(Fourier transform) 분석기(spectrometer)를 사용하였다. 또한 측정 대역은 근적외선(NIR) 전체 영역 모두를 측정할 수 있도록 $12,500{\sim}4,000cm^{-1}$ 범위에서 측정하였으며, 분석 대상 한지 기록물을 측정하기 위하여 적분구(integrating sphere)에 접촉하도록 구성 하였다. 한지 기록물의 보존상태를 평가하기 위한 인자로는 화학적 변화 정도를 가장 잘 알 수 있는 산성도(pH)를 사용하였다. 그리고 이들 인자와 근적외선 스펙트럼과 상관관계를 확인하였고, 이때 최적 상관계수를 찾기 위하여 측정한 스펙트럼을 전처리 하였다. 전처리 방법으로는 다산란보정(MSC)과 Savitzky-Golay의 1차 미분을 이용하였다. 상관계수는 부분최소자승법(PLS, Partial least square)으로 확인하였다. 산성도(pH)의 경우에 전처리를 하지 않았을 때의 상관계수($R^2$)는 0.92, 표준예측오차(SEP)는 0.24이었고, 전처리를 하였을 때의 상관계수($R^2$)는 0.98, 표준예측오차(SEP)는 0.19 이었다. 따라서 전처리하였을 때 상관계수와 표준오차가 향상되었음을 알 수 있었다. 또한 1차 미분을 하였을 때의 상관계수($R^2$)는 0.98, 표준예측오차(SEP)는 0.09로써 가장 좋은 표준 예측오차를 얻었다. 따라서 전처리하기 전의 상관계수와 표준오차가 오히려 좋다는 것을 확인하였다. 이러한 결과를 통해 한지 기록물을 적분구와 근적외선 분석기를 이용하여 비파괴적인 방법으로 보다 빠르게 상태를 평가할 수 있을 것으로 판단되었다.

  • PDF

포장재배수도(浦場栽培水稻)의 무기영양(無機營養) -IV 삼요소처리별(三要素處理別) 수량(收量) 및 건물생산량과 N. P. K. Si 흡수량(吸收量)과 관계(關係) (Mineral nutrition of the field-grown rice plant -IV. Relationship between yield, total dry matter yield and up take of N.P.K. Si in N.P.K. simple trial)

  • 박훈
    • 한국토양비료학회지
    • /
    • 제7권4호
    • /
    • pp.215-220
    • /
    • 1974
  • 수량(收量) 및 건물생산량과 NPK 및 Si 흡수량(吸收量)과의 단순(單純) 및 다중상관분석(多重相關分析)을 하고 다중회귀식(多重回歸式)을 검토(檢討)하여 다음과 같은 결과(結果)를 얻었다. 1. 단순상관계수(單純相關係數)는 수량(收量)에서보다 전건물(全乾物) 생산량에서 크고 N는 무(無)N구(區)와 무비구(無肥區)에서 크고 P는 무(無)P구(區)에서 크며 K는 무(無)K구(區)에서 가장 적다. 2. 다중상관계수(多重相關係數)는 단순상관계수(單純相關係數)보다 크고 삼요소(三要素)보다 Si를 첨가시킨 경우에 더 크다. 무비구(無肥區)에서 계수가 가장 크고 무(無)K구(區)의 계수(係數)가 가장 적은 경향(傾向)을 뚜렷이 보였는데 단순상관(單純相關)에서도 그러한 경향(傾向)을 보였다. 3. P 흡수량(吸收量)이 많고 이용률(利用率)도 큰 고온(高溫)의 해에는 P의 단순상관계수(單純相關係數)가 크고 K흡수량(吸收量)이 많고 이용률(利用率)도 큰 저온(低溫)의 해에는 역시 상관계수(相關係數)도 크며 N나 Si도 K를 따랐다. 그러나 수량(收量)과의 다중회귀식(多重回歸式) 계수(係數)에 의(依)하면 N P K Si 모두 고온(高溫)의 해에만 유의성(有意性)을 보였다. 4. K의 회귀계수(回歸係數)는 수량(收量)에 있어서 부(負)로 많이 나타나며 건물생산량에 있어서는 정(正)으로 유의성(有意性)이 컸다. 5. 회귀계수(回歸係數)는 삼요소(三要素)보다 이에 Si를 더 첨가했을 때 삼요소(三要素)의 계수(係數)가 모두 감소(減少)하는데 P가 가장 심하였다. 6. 회귀계수(回歸係數)는 N증시(增施)에 따라 N계수(係數)는 증가(增加)하고 P계수(係數)는 감소(減少)하며 K와 Si계수(係數)는 일정(一定)치 아니 하였다. 7. 상관계수(相關係數)나 회귀계수(回歸係數)의 크기와 유의성(有意性)으로부터 각양분(各養分)의 수량(收量)에의 기여도(奇與度)는 N > Si > P > K 이고 건물생산량에서는 N > K > Si > P의 순위(順位)였으며 N가 중심(中心)으로 기타 양분이 N에 영향하는 방향으로 밀접(密接)하게 상호관련(相互關聯)되었음을 보인다. N 영양(營養)의 주역성(主役性)은 상대수량발현빈도양상(相對收量發現頻度樣相)에서도 나타났다.

  • PDF

교사와 유아 간의 관계와 유아의 사회적 능력간의 관계에서 유아 수줍음의 매개효과 (The Mediating Effects of Young Children's Shyness on the Relationship between Teacher-Children Relationship and Young Children's Social Competence)

  • 노진희;김희화
    • 한국지역사회생활과학회지
    • /
    • 제27권1호
    • /
    • pp.5-17
    • /
    • 2016
  • The purpose of this study was to examine the mediating effects of young children's shyness on the relationship between teacher-children relationship and young children's social competence. The subjects of the study were 270 children from three years to five years old and their teachers in Busan. Frequency, t-test, Cronbach ${\alpha}$, Pearson's correlation coefficients, and hierarchial regression were used for data analysis. The results were as follows: first, teacher-children intimacy showed positive correlation with the young children's social competence. Teacher-children conflict showed negative correlation with the young children's social competence. Second, teacher-children intimacy showed negative correlation with the young children's shyness. Teacher-children conflict showed positive correlation with the young children's shyness. Third, young children's shyness showed negative correlation with the young children's social competence. Fourth, young children's shyness had partial mediating effects on the relationship between teacher-children intimacy and young children's sociability. Young children's shyness had partial mediating effects on the relationship between teacher-children intimacy and young children's popularity and leadership. Young children's shyness had partial mediating effects on the relationship between teacher- children conflict and young children's sociability. Young children's shyness had partial mediating effects on the relationship between teacher-children conflict and young children's popularity and leadership.

퍼지 의사결정 모델에 의한 감성제품 디자인 요소의 추론에 관한 연구 (A Study on the Inference of Product Design Elements by Fuzzy Decision Making Model)

  • 양선모;이순요;안범준
    • 대한인간공학회지
    • /
    • 제17권1호
    • /
    • pp.37-46
    • /
    • 1998
  • A human sensibility ergonomics design supporting system was applied to the product development for the customer's satisfaction based on ergonomics technology. The system is composed of three major subsystems such as customer's sensibility analysis, inference mechanism, and presentation technology. The main approaches of the system are to analyze customer's sensibilities and to translate them into product design elements. The purpose of this paper is to develop a design supporting system in which the relationship between customer's sensibility and product design elements is reasoned by a MADM(Multi-Attribute Decision Making) fuzzy model. In this model, three variables such as multiple correlation coefficients, partial correlation coefficients, and category scores were used in reasoning process. The weighted value of the words were also considered in fuzzy decision process. As a case study, the design supporting system with the MADM fuzzy model was applied to the personnel computer design.

  • PDF