• The Journal of the Korea Contents Association
• /
• v.11 no.3
• /
• pp.1-8
• /
• 2011

Automatic vehicle license plate recognition technology is widely used in gate control and parking control of vehicles, and police enforcement of illegal vehicles. However inherent geometric information of the license plate can be transformed in the vehicle images due to the slant and the sunlight or lighting environment. In this paper, a distortion invariant vehicle license plate extraction and recognition algorithm is proposed. First, a binary image reserving clean character strokes can be achieved by using a DoG filter. A plate area can be extracted by using the location of consecutive digit numbers that reserves distortion invariant characteristic. License plate is recognized by using neural networks after geometric distortion correction and image enhancement. The simulation results of the proposed algorithm show that the accuracy is 98.4% and the average speed is 0.05 seconds in the recognition of 6,200 vehicle images that are obtained by using commercial LPR system.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.8 no.3
• /
• pp.52-63
• /
• 2009

Recently in Korea, in the case of metropolis, the urban signalized intersections are controlled by traffic information center or ITS center. Cheon-an City also established traffic information center through the 1st.-$\sim$3rd. ITS public construction and has managed this center that includes bus information service, traffic information collection and providing service, parking information service, and traffic responsive control system. In the Cheon-an metropolitan traffic signal operation, traffic signal controllers were grouped by the each main traffic flow axes and performed with coordinated signal timing for the signalized arterials, and also cycle and split changed by realtime traffic demands. Cheon-an urban traffic responsive control system was evaluated by intersection delay and speed, then it was verified that the delay decreased and vehicle speed improved. However, the rural signal control system to connect adjacency town was evaluated to have lower status than urban area due to the unimproved TOD (Time of day) plan. Therefore actuated signal control was examined for substitutive control system in isolated signal intersection. The aim of this article is to compare actuated signal control with TOD mode in the rural intersection of Cheon-an and to fine superiority of these two control mode, with evaluation of vehicle delay by using HCM(2000) method and by micro-simulation CORSlM. The result of field test show that actuated signal control gave better performance in delay comparison than the existing TOD signal control. And simulation outcome verified that non-optimized TOD has higher delay than optimized TOD mode, non-optimal actuated mode, and optimal actuated signal control mode. Particularly, these three modes delays had not different values according to the paired sample t-test. This is because small traffic demands were loaded in each links. This suggested actuated signal control is expected to be more effective than TOD mode in some rural isolated intersections which frequently need to survey for traffic volume.

• Journal of the Korean housing association
• /
• v.19 no.6
• /
• pp.33-44
• /
• 2008

The street system in multi-family housing is an important design element to control the circulation of vehicles and pedestrians, and to form the spatial organization of the projects. In particular, in the case of high-rise apartments, the street patterns have an influence on the safety, amenity, and convenience of facilities. Until now, however, the design of street patterns in most high-rise multi-family housing projects has diminished the quality of residential environments because priority of design consideration has primarily been given to planning road ways and parking areas. Nevertheless, the design competitions introduced for the first time in the 1980s have played a significant role in developing fresh ideas and concepts in housing design. Because street patterns have been respectably modified as a result of the generalizing of design competitions, it is important to review the ideas that have been proposed in competitions over the recent past. In this context, this study classified the types of street patterns and analyzed their design characteristics for the proposals of housing design competitions since the 1990s. As a result of this analysis, the road patterns are classified into 4 types: 1) serial type, 2) isolated type, 3) mixed type, and 4) not a road pattern due to the system of connection. In addition, these were further divided into 8 types: 1) loop, 2) ring, 3) penetration, 4) tree, 5) direct entry, 6) ring and penetration, 7) loop and penetration, 8) not a road pattern due to appearance and the collector.

• KEPCO Journal on Electric Power and Energy
• /
• v.8 no.2
• /
• pp.69-72
• /
• 2022

This paper actually investigates the load on major large-scale buildings in the downtown area, examines the economic feasibility of installing PV and ESS in a microgrid target building, and evaluates whether an electric vehicle capable of V2G through two buildings is effective as an economical analysis program (HOMER) was analyzed using. It is economical to install a mixture of ESS rather than using the whole PV, and it is shown that if there is an electric vehicle using the V2G function of EV, there is an economic effect to replace the PV. So that Incentives and policies are needed to replace a large area of PV and utilize the existing parking lot to lead EV as a resource of the microgrid. Currently, P2X technology that stores power as ESS or converts it to other energy to control when surplus renewable energy occurs in large-capacity solar power plants and wind farms, etc. This is being applied, and efforts are being made to maintain the stability of the system through the management of surplus power, such as replacing thermal energy through a heat pump. Due to the increase in electric vehicles, which were recognized only as a means of transportation, technologies for using electric vehicles are developing. Accordingly, existing gas stations do not only supply traditional chemical fuels, but electricity, and super stations that also produce electricity have appeared. Super Station is a new concept power plant that can produce and store electricity using solar power, ESS, V2G, and P2G. To take advantage of this, research on an urban microgrid that forms an independent system by tying a large building and several buildings together and supplies power through a super station around the microgrid is in full swing.

• Journal of IKEEE
• /
• v.21 no.4
• /
• pp.412-415
• /
• 2017

In this paper, we propose a multi license plate recognition system using high resolution $360^{\circ}$ omnidirectional IP camera. The proposed system consists of a planar division part of $360^{\circ}$ circular image and a multi license plate recognition part. The planar division part of the $360^{\circ}$ circular image are divided into a planar image with enhanced image quality through processes such as circular image acquisition, circular image segmentation, conversion to plane image, pixel correction using color interpolation, color correction and edge correction in a high resolution $360^{\circ}$ omnidirectional IP Camera. Multi license plate recognition part is through the multi-plate extraction candidate region, a multi-plate candidate area normalized and restore, multiple license plate number, character recognition using a neural network in the process of recognizing a multi-planar imaging plates. In order to evaluate the multi license plate recognition system using the proposed high resolution $360^{\circ}$ omnidirectional IP camera, we experimented with a specialist in the operation of intelligent parking control system, and 97.8% of high plate recognition rate was confirmed.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.31 no.1D
• /
• pp.149-155
• /
• 2011

The aim of this study is to grasp how the dwellers of apartment cognize the real condition of the management such as general control of janitor office or management of maintenance, environment, account and imposing price of management. The analysed results of recognition are as following. First, as the dwellers judged that the janitors are incapable to control dispute among the households, it needs to develop the ability to cope with the demand of control dispute by various curriculum. There should be more strict management of parking lot for the handicapped. Second, it needs to establish the plan to improve maintenance of the rest facility. Third, as dwellers thought the management expenses not to be made public clearly, it needs to use various way, not only by neighborhood meeting but also information system such as establishing web page or E-mail notice for better announcement of the settled matters such as management expenses. Forth, the audit result of management expenses and the measures conducted after audit should be reported widely, contract of construction work services needs to be publicized by neighborhood meeting or other information system.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.40 no.5
• /
• pp.140-147
• /
• 2012

This study developed a flowerbed type infiltration system that could control the amount of runoff discharge under a certain level estimated its proper design infiltration rate, and analyzed the effects of its implementation. Analyzing the performance of infiltration system is the one of the essential processes that should be under review to predict its effects after implementation when a rainwater infiltration system is included in a district-based plan. To estimate the unit design infiltration rate of this system, the runoff decrease effect was analyzed by varying the unit infiltration rate of the system applied to the parking lot adjacent to the Korea Institute of Construction Technology laboratory building by using a water balance analysis program. After varying the unit design infiltration to $0.1{\sim}3m^3/m^2.day$ to analyze the variation in the rate of runoff, 80% of the runoff was infiltrated at $1.0m^3/m^2.day$, and the unit infiltration design rate at the time was 0.0416(m3/m2.hr). It was also found that the unit design infiltration rate obtained from a field infiltration test of the developed system was about $0.045m^3/hr$. Based on this study, it was possible that infiltration rate is estimated to consider the economic scale and environmental effect. It is significant to apply the spatial plan of rainwater infiltration system as green infrastructure.

• Journal of Wetlands Research
• /
• v.9 no.2
• /
• pp.9-20
• /
• 2007

The nonpoint pollutants are originated from various land uses. Of the landuses, the development means the changes of the soil cover and the increases of imperviousness rate, which will increase the nonpoint pollutant emissions during a storm. Therefore, the Ministry of Environment in Korea has programed TPLMS(Total Pollution Load Management System) for four major large rivers to improve the water quality in rivers by controling the total pollutant loadings from the watershed area. The study area was forest landuse before resort development, however it is now changing to the resort. Some of the forest areas will be changed to parking lots, roads and buildings, which can be the major pollutant sources in the future. The paved areas are highly polluted landuses because of high pollutant accumulation rate by vehicle activities during dry periods. Therefore, this research is achieved to determine the changes of pollutant loading rate by development plan and to provide the best management practices for controlling nonpoint pollutants. Finally this research will provide the environment-kindly development technology for protecting the water quality.

• Journal of Korean Society of Rural Planning
• /
• v.8 no.1 s.15
• /
• pp.105-113
• /
• 2002

This investigation aims to provide basic data for rural village planning and rehabilitation planning. Public infrastructures of forty selected villages have been surveyed. Provision of facilities, user satisfaction, perceived problems, and conditions of maintenance have been surveyed for three classified types of infrastructures; 1) public utility spaces such as community hall, and parking lots, 2) public production infrastructures such as warehouses, and irrigation facilities, and 3) public infrastructures for living environments such as roads, water supply, and sewage system. All twenty smaller villages (ki-cho-ma-ul) had problems of poor conditions and insufficient spaces with community halls. Most of the smaller villages suffered from lack of public production infrastructures, or had problems of insufficient spaces and poor maintenance conditions. They also lacked good access roads with adequate right of ways. Only three villages were provided with sewage systems. In the twenty larger villages (myun-bo-ma-ul), though public utility spaces were provided for most of them (as an example, sixteen villages had welfare centers), they were not large enough and they were maintained in poor condition too. On the one hand twelve of the larger villages had farm machine service centers, only a few villages were equipped with warehouses. Many more public infrastructures for living environments were found in larger villages. However, only a few villages had pollution control facilities. Multidimensional scaling revealed groups of distinctive characteristics, in terms of public infrastructures, among smaller villages. It did not show any noticeable distinctions among larger villages.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.5
• /
• pp.364-371
• /
• 2016

We developed a prediction model of assistance force for the opening/closing of an automobile door depending on the condition of the parking ground. The candidates of the learning models for the operating assistance force were compared to determine the proper force according to the slope and user's force, etc. The reduced experimental model was developed to obtain learning data for the estimation model. The learning algorithm was composed to predict the assistance force to incorporate real assistance force data. Among these algorithms, an Artificial Neural Network (ANN) and Support Vector Machine(SVM) were applied and the adaptability was compared between these models. The SVM provided more adaptability for the learning process of the door assistance force prediction. This paper proposes a system for determining the assistance force to control a door motor to compensate for the deviation of required door force in the slope condition, as needed in the plane condition.