• 조명전기설비학회논문지
• /
• 제24권8호
• /
• pp.84-93
• /
• 2010

이 논문은 이산신호가 연속적으로 입력될 때, 이산신호에서 고속으로 파라미터를 추정하고, 그 결과를 시각화하는 방법에 대해서 기술하고 있다. 이 논문은 이산푸리에변환에서 직접 파라미터를 추정하는 고속파라미터 추정 알고리즘을 적용하여 연속신호에서 파라미터를 추정하고, 추정한 중요 파라미터들을 효율적으로 시각화하는 방법에 대해서 기술하고 있다. 이 논문에서 제안한 연속신호에 대한 저주파 파라미터 추정방법을 3개의 모드를 가진 시험함수에 적용하여 제안한 알고리즘과 시각화의 효율성을 검증하였다.

• 정보과학회 논문지
• /
• 제42권7호
• /
• pp.910-918
• /
• 2015

본 논문에서는 조영증강 초음파영상의 분석과정에서 육안판별의 한계를 극복하기 위한 파라미터 가시화기법을 소개하고, 이 과정에서 영상의 왜곡과 노이즈를 보정하기 위한 방법론을 제시한다. 초음파영상에서 조영제의 전이형태에 대한 동적패턴은 간질환 진단에서 의미있는 파라미터가 되는데, 전이시간 정보와 조영증강 패턴을 정적인 단일영상으로 표현함으로써 급속도로 진행되는 동영상에서 정확한 정보를 효과적으로 판별할 수 있게 한다. 진단파라미터 데이터의 신뢰도를 저하시키는 요인으로 호흡에 의한 흔들림현상과 마이크로 버블에 의한 노이즈를 들 수 있다. 이에 대한 대안으로 영상의 움직임추적을 위한 다단계 알고리즘과 마르코프 랜덤 필드 모델에 기반한 영상개선기법을 제안한다. 실제 임상데이터를 사용한 실험결과를 통하여, 제안된 방법의 유용성을 실험적으로 고찰한다.

• 한국가시화정보학회지
• /
• 제9권3호
• /
• pp.44-50
• /
• 2011

In this study, we propose a method for characterizing fluid-mechanical properties of a fluid surface, such as surface dilatational and shear viscosity, by matching the flow visualization and the numerical simulation for a Stokes flow in a three-dimensional cavity. The surface flow is driven by shear stress exerted on the free surface by an external gas flow. The external gas flow is simulated by using a commercial code, while the Stokes flow is calculated by an in-house code. We have found that the surface flow is very sensitive to the surface tension and other properties. The qualitative feature of the surface flow can be reproduced by the parameter tuning.

• 대한기계학회논문집B
• /
• 제23권2호
• /
• pp.218-225
• /
• 1999

Flow visualization study has been conducted to simulate the turbulent dispersion behavior of a crossflow jet physically under the conditions of various thermal stratification in a wind tunnel. A smoke jet with the constant ratio of the jet to freestream velocity is injected normally to the cross flow of the thermally stratified wind tunnel(TSWT) for flow visualization. The typical natures of the smoke dispersion under different thermal stratifications such as neutral, weakly stable, strongly stable, weakly unstable, strongly unstable and inversion layer are successfully reproduced in the TSWT. The Instantaneous velocity and temperature fluctuations are measured by using a cold and hot-wire combination probe. The time averaged dispersion behaviors, the centerline trajectories, the spreading angles and the virtual origins of the cross jet are deduced from the edge detected images with respect to the stability parameter. All the general characteristics of the turbulent dispersion behavior reveal that the definitely different dispersion mechanisms are inherent in both stable and unstable conditions. It is conjectured that the turbulent statistics obtained in the various stability conditions quantitatively demonstrate the vertical scalar flux plays a key role in the turbulent dispersion behavior.

• 한국분무공학회지
• /
• 제13권4호
• /
• pp.187-192
• /
• 2008

In this study, the mechanisms of binary droplet collision were studied with diesel, ethanol and purified water. The droplet collisions of liquid droplet have been investigated for the same droplet diameter. In order to obtain the digital images of the droplet collision behavior, the experimental equipment was composed of the droplet generating system and the droplet visualization system. The droplets were produced by the vibrating orifice monodisperse generator. The visualization system consisted of a long distance microscope, a light source, and a high speed camera. The outcomes of binary droplet collision can be divided into four regimes, bouncing, coalescence, reflexive separation and stretching separation. The impact angle and the relative velocity of binary droplet are main parameters of collision phenomena, so the transition mechanism of droplet collision can be divided by the impact parameter.

• 한국가시화정보학회지
• /
• 제4권2호
• /
• pp.81-87
• /
• 2006

In this paper, we present flow patterns around and performance of an air-flow separator by using the numerical analysis. With this separator, particles of different density are to be separated by using the drag force from the air flow. The low-density particles are designed to be separated by using inhalation through holes on a rotating drum. To obtain the flow informations needed for determining the proper design parameters, we have performed numerical simulations by using a commercial code, ANSYS CFX. Various parameter set was tested and it was found that depending on the design of drums there exist critical parameter set regarding the attachment of light particles on the drum, which is prerequisite for the separation of materials. We present here the possibility of using the present design in separation of particles mixed in the clod for use in recycling.

• 한국가시화정보학회지
• /
• 제10권3호
• /
• pp.25-29
• /
• 2012

This paper introduces a new parameter to design the $2{\times}2$ microfluidic centrifuge with single flow rotation positioned at the center of microchamber. The dimensional centrifugal acceleration momentum flux which is defined as the interfacial momentum flux divided by distance from the center of the chamber explains the flow rotation and its threshold provides a reference to expect single flow rotation. Through the numerical and experimental visualization of the flow rotation, the number and position of flow rotation in the $2{\times}2$ microfluidic centrifuge were examined. At a channel width of $50{\mu}m$ and chamber width of $250{\mu}m$, single flow rotation was obtained over at a Reynolds number of 300, while at a channel width of $100{\mu}m$ and chamber width of $500{\mu}m$, single flow rotation did not appear. The numerical analysis showed that the threshold centrifugal acceleration momentum flux to obtain single flow rotation was $3500kg/m{\cdot}s^2$.

• 대한기계학회논문집B
• /
• 제41권3호
• /
• pp.191-197
• /
• 2017

본 연구는 Weis-Fogh형 수차모델의 비정상 유동장을 PIV를 이용해 가시화한 것이다. 실험은 비교적 효율이 높은 날개의 열림각 ${\alpha}=40^{\circ}$ 및 날개의 이동 속도에 대한 일정류의 속도비 U/V=1.5~2.5 범위 내에서 진행했다. 유동장은 각 실험 파라메터에 대해 열리는 과정, 병진운동의 과정 및 닫히는 과정으로 나누어 고찰되었으며, 그 결과를 요약하면 다음과 같다. 열리는 과정에서는 날개와 벽 사이에 유체가 흡입되며, 그 유입속도는 열림각이 클수록, 속도비가 클수록 증가했다. 병진운동의 과정에서 날개 압력면의 유체는 날개의 이동방향으로 움직였으며, 배면에서의 경계층의 두께는 속도비 2.0일 때 가장 작았다. 닫히는 과정에서는 날개와 벽 사이에서 유체가 분출되며, 그 분출속도는 열림각이 작을수록 증가했지만, 속도비와는 관계가 없었다.

• Journal of Multimedia Information System
• /
• 제5권1호
• /
• pp.35-42
• /
• 2018

Direct volume rendering (DVR) is an important 3D visualization method for medical images as it depicts the full volumetric data. However, because DVR renders the whole volume, regions of interests (ROIs) such as a tumor that are embedded within the volume maybe occluded from view. Thus, conventional 2D cross-sectional views are still widely used, while the advantages of the DVR are often neglected. In this study, we propose a new visualization algorithm where we augment the 2D slice of interest (SOI) from an image volume with volumetric information derived from the DVR of the same volume. Our occlusion-based DVR augmentation for SOI (ODAS) uses the occlusion information derived from the voxels in front of the SOI to calculate a depth parameter that controls the amount of DVR visibility which is used to provide 3D spatial cues while not impairing the visibility of the SOI. We outline the capabilities of our ODAS and through a variety of computer tomography (CT) medical image examples, compare it to a conventional fusion of the SOI and the clipped DVR.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1999년도 하계종합학술대회 논문집
• /
• pp.563-566
• /
• 1999

The functional diagnosis instrument should be preceded first to both the accurate selection of exact acupoint and discrimination. so the measuring and stimulating method are improved to SPAC pattern to evaluate impedance existed in the body. As a result, the resistance factor between skin and probe, the dipolization of cell was reduced so that the judgement of acupoint is advanced. After extraction of optimization parameter of SPAC pattern which the high discrimination efficiency and the lowest affection on the human body is controlled by using microprocessor to enhance conviction. The discrimination efficiency was confirmed by meridian visualization system. Also mechanism of probe was improved to increase efficiency of image recognition processing. The image of discriminated acupoint with probe is obtained by using a camera, the location on the tip of probe is recognized and processed. And then these are converted to virtual color by proportional to measuring current level of scan point on skin.