• Journal of Institute of Control, Robotics and Systems
• /
• v.4 no.4
• /
• pp.506-516
• /
• 1998

In this paper, an algorithm is proposed to detect the malfunction of plasma-etching characteristics using EPD signal trajectories. EPD signal trajectories offer many information on plasma-etching process state, so they must be considered as the most important data sets to predict the wafer states in plasma-etching process. A recent work has shown that EPD signal trajectories were successfully incorporated into process modeling through critical parameter extraction, but this method consumes much effort and time. So Principal component analysis(PCA) can be applied. PCA is the linear transformation algorithm which converts correlated high-dimensional data sets to uncorrelated low-dimensional data sets. Based on this reason neural network model can improve its performance and convergence speed when it uses the features which are extracted from raw EPD signals by PCA. Wafer-state variables, Critical Dimension(CD) and uniformity can be estimated by simulation using neural network model into which EPD signals are incorporated. After CD and uniformity values are predicted, proposed algorithm determines whether malfunction values are produced or not. If malfunction values arise, the etching process is stopped immediately. As a result, through simulation, we can keep the abnormal state of etching process from propagating into the next run. All the procedures of this algorithm can be performed on-line, i.e. wafer to wafer.

• Journal of the Korea Computer Industry Society
• /
• v.2 no.7
• /
• pp.923-932
• /
• 2001

In this paper, An imprecise real-time task sets composed of multimedia datas are generated using several parameters and an algorithm which can analyse schedulability of generated imprecise real-time task sets before execution of this task sets is proposed. Also, The schedulability of task set depends on variation of parameter values which were used during the generation of the task set is studied. As a result of experiment, It isproved that the schedulability of task set is more and more weak as large as execution requirement time of mandatory subtasks and, as many as the number of tasks which can be scheduled at some instant. The schedulabilty analysis algorithm which is presented on this paper is expected to use effectively on QoS service of multimedia datas.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.10 no.4
• /
• pp.1927-1943
• /
• 2016

Jitterbug is a passive network covert timing channel supplying reliable stealthy transmission. It is also the basic manner of some improved covert timing channels designed for higher undetectability. The existing entropy-based detection scheme based on training sample binning may suffer from model mismatching, which results in detection performance deterioration. In this paper, a new detection method based on the feature of Jitterbug covert channel traffic is proposed. A fixed binning strategy without training samples is used to obtain bins distribution feature. Coefficient of variation (CV) is calculated for several sets of selected bins and the weighted mean is used to calculate the final CV value to distinguish Jitterbug from normal traffic. Furthermore, the timing window parameter of Jitterbug is estimated based on the detected traffic. Experimental results show that the proposed detection method can achieve high detection performance even with interference of network jitter, and the parameter estimation method can provide accurate values after accumulating plenty of detected samples.

• Proceedings of the Korean Society of Marine Engineers Conference
• /
• 2002.05a
• /
• pp.261-266
• /
• 2002

In this Paper, we Propose model-based tuning rules of the PID controller incorporating with genetic algorithms. Three sets of optimal PID parameters for step set-point tracking are obtained based on the first-order time delay model of plants and a genetic algorithm which minimizes performance indices(IAE, ISE and ITAE). Then tuning rules are obtained using the tuned parameter sets, potential rule models and a genetic algorithm. Simulation is carried out to verify the effectiveness of the proposed rules.

• Journal of the Korean Wood Science and Technology
• /
• v.27 no.4
• /
• pp.51-56
• /
• 1999

Finite element method was utilized to analyze crack tip stress and displacement field under drying stress case as stepwise loading. Opening mode of single-edge-notched model was employed and analyzed by linear elastic fracture mechanics of plane stress case. The drying stresses were applied as stepwise loads at the boundary elements of the model with 10 steps of time serial. The stress intensity factor($K_I$) for opening mode reached to its maximum just prior to the stress reversal. The $K_I$ from the displacement fields revealed 1.7 times higher than those from stress fields. By comparing the two sets of $K_I$ from displacement and stress fields, single parameter $K_I$ showed its validity to characterize displacement fields around the crack tip front while stress field could not be characterized due to large variations between two sets of data.

• Transactions on Electrical and Electronic Materials
• /
• v.7 no.4
• /
• pp.210-214
• /
• 2006

In this paper, two sampling methods which are Latin hypercube sampling (LHS) and simple random sampling were. compared to improve the modeling speed of neural network model. Sampling method was used to generate initial weights and bias set. Electrical characteristic data for $HfO_2$ thin film was used as modeling data. 10 initial parameter sets which are initial weights and bias sets were generated using LHS and simple random sampling, respectively. Modeling was performed with generated initial parameters and measured epoch number. The other network parameters were fixed. The iterative 20 minimum epoch numbers for LHS and simple random sampling were analyzed by nonparametric method because of their nonnormality.

• Asia Marketing Journal
• /
• v.22 no.2
• /
• pp.1-18
• /
• 2020

We estimate a choice-based aggregate demand model accounting for consumers' consideration sets, and study its implications on market structure. In contrast to past research, we model and estimate consumer demand using aggregate-level consumer browsing data in addition to aggregate-level choice data. The use of consumer browsing data allows us to study consumer demand in a realistic setting in which consumers choose from a subset of products. We calibrate the proposed model on both data sets, avoid biases in parameter estimates, and compute the price elasticity measures. As an empirical application, we estimate consumer demand in the camcorder category and study its implications on market structure. The proposed model predicts a limited consumer price response and offers a more discriminating competitive landscape from the one assuming universal consideration set.

• Journal of Advanced Marine Engineering and Technology
• /
• v.25 no.5
• /
• pp.1086-1090
• /
• 2001

In this paper, a method deciding the permissible gains of the P and PT controllers for a retarded process under stable condition is proposed. For analysis, the controlled process is assumed to be first-order system with time delay. At first, the adjustable parameter sets causing stability limit are obtained based on the frequency domain condition which makes the roots of the characteristic equation locate on the imaginary axis. And the cut-in frequency ${\omega}_p$ to bring the parameter set to P control from PI control is derived is derived in terms of L and $T_m$ then ${\omega}_p$ is used to compute the maximum gain with stable condition. The results indicate that the permissible controller gains can be described by a unique if parameters L and $T_m$ are know.

• The Pure and Applied Mathematics
• /
• v.20 no.1
• /
• pp.59-70
• /
• 2013

The purpose of this study was to develop a zero-inflated Rasch (ZI-Rasch) model, a combination of the Rasch model and the ZIP model. The ZI-Rasch model was considered in this study as an appropriate alternative to the Rasch model for zero-inflated data. To investigate the relative appropriateness of the ZI-Rasch model, several analyses were conducted using PROC NLMIXED procedures in SAS under various simulation conditions. Sets of criteria for model evaluations (-2LL, AIC, AICC, and BIC) and parameter estimations (RMSE, and $r$) from the ZI-Rasch model were compared with those from the Rasch model. In the data-model fit indices, regardless of the simulation conditions, the ZI-Rasch model produced better fit statistics than did the Rasch model, even when the response data were generated from the Rasch model. In terms of item parameter ${\lambda}$ estimations, the ZI-Rasch model produced estimates similar to those of the Rasch model.

• Journal of KSNVE
• /
• v.10 no.3
• /
• pp.531-535
• /
• 2000

A three-parameter model of viscoelastic damper which has a non-linear spring as an element is incorporated into an oscillator. The behavior of the damper model shows non-linear hysteresis curves which is qualitatively similar to those of real viscoelastic materials. The motion is governed by get analytic solutions of the system. The frequency-response curves show that multiple solutions co-exist and that the jump phenomena can occur. In addition it is shown that separate solution branch exists and that it can merge with the primary response curve. Saddle-node bifurcation sets explain the occurences of such non-linear phenomena. A direct time intergration of the original equation of motion validifies the use of the harmonic balance method to this sort of problem.