• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2004년도 학술대회 논문집
• /
• pp.297-299
• /
• 2004

In multi-ground distribution system, overhead ground wire and neutral wire are parallel connected to offer the electrical power energy and protect damage of lightning strokes. Therefore a case where the two wires become single wire, the power company can get the benefit such as installation cost saving and line fault protection by simplify of distribution line. In this paper we describe the result of impulse test in both system ; one is the present power system the other is unified power system parallel connected overhead ground wire and neutral wire. As a result of this impulse test, the present power system get lower impulse voltage than the unified power system.

• 한국시뮬레이션학회논문지
• /
• 제5권2호
• /
• pp.13-24
• /
• 1996

Workflow is an ordered sequence of interdependent component data activities each of which can be executed on an integrated information system by accessing a remote information system. In our previous research [4], we proposed a distributed CIM Workflow system which consists of a workflow execution model called DAF-Net and an agent-based information systems called AIMIS. Given a component data activity, there needs an interaction protocol among agents which allocates the component data activity to a relevant information systems exist. The objective of this research is to propose and test two protocols: ARR(Asynchronous Request and Response)protocol and NCL(Negotiation with Case based Learning) protocol. To test the effectiveness of the protocols, we applied the PVM(Parallel Virtual Machine) software to simulate the distributed CIM Workflow system. PVM provides a distributed computing environment in which users can run different software processes in different computers while allowing communication among the processes.

• 소성∙가공
• /
• 제29권2호
• /
• pp.113-117
• /
• 2020

Various parameters are involved in the frictional behavior of steel sheet during stamping. We performed various tests in order to investigate the influence of tool surface texture directionality upon the resulting friction in sheet forming processes. Four different tools were manufactured which gave us a range of roughness for both parallel and transverse texture directions. Each of the tools was examined in flat type friction tests under identical test conditions. The tool with the transverse surface texture produces significantly lower levels of friction than the tool with parallel texture direction. Considering the lubrication mechanism associated with transverse texture, one can imagine the lubricant being constantly supplied from the reservoir of the micro valley to the point of contact and hence producing the lower levels of friction seen.

• Journal of the Korean Data and Information Science Society
• /
• 제20권5호
• /
• pp.941-948
• /
• 2009

We consider a life testing experiment in which several two component shared parallel system are put on test, and the test is terminated at a specified number of system failures. The bivariate data obtained from such a system level life testing can be classified into three classes: (1) the case of failed two components with known failure times, (2) the case of one censored component and the other failed component of which the failure time might be known or unknown, (3) the case of censored two components. In this thesis, the maximum likelihood estimators of parameters for Block and Basu bivariate exponential distribution under above censoring scheme are obtained. And the results of comparative studies are presented.

• Journal of Genetic Medicine
• /
• 제12권2호
• /
• pp.66-71
• /
• 2015

Down syndrome screening with cell-free DNA (cfDNA) in the maternal plasma has recently received much attention in the prenatal diagnostic field. Indeed, a large amount of evidence has already accumulated to show that screening tests with cfDNA are more sensitive and specific than conventional maternal serum and/or ultrasound screening. Globally, more than 1,000,000 of these noninvasive prenatal tests (NIPTs) have been performed to date. There are several different methods for NIPTs that are currently commercially available, including shotgun massively parallel sequencing, targeted massively parallel sequencing, and single nucleotide polymorphism (SNP)-based methods. All of these methods have their own advantages and disadvantages. In this review, I will focus specifically on the SNP-based NIPT.

• 센서학회지
• /
• 제25권2호
• /
• pp.110-115
• /
• 2016

This paper describes the design and fabrication of a three-axis force sensor with three parallel plate structures(PPSs) for measuring force in a finger force measuring system for a spherical object catch. The three-axis force sensor is composed of a Fx force sensor, Fy force sensor and a Fz force sensor, and the elements of Fx force sensor and Fy force sensor are a parallel plate structure(PPS) respectively and Fz force sensor is two PPS. The three-axis force sensor was designed using FEM(Finite Element Method), and manufactured using strain-gages. The characteristics test of the three-axis force sensor was carried out. As a test results, the interference error of the three-axis force sensor was less than 1.32%, the repeatability error of each sensor was less than 0.04%, and the non-linearity was less than 0.04%.

• 대한전기학회논문지:시스템및제어부문D
• /
• 제52권9호
• /
• pp.540-546
• /
• 2003

A fast pattern classification algorithm with Cellular Nonlinear Network-based dynamic programming is proposed. The Cellular Nonlinear Networks is an analog parallel processing architecture and the dynamic programing is an efficient computation algorithm for optimization problem. Combining merits of these two technologies, fast pattern classification with optimization is formed. On such CNN-based dynamic programming, if exemplars and test patterns are presented as the goals and the start positions, respectively, the optimal paths from test patterns to their closest exemplars are found. Such paths are utilized as aggregating keys for the classification. The algorithm is similar to the conventional neural network-based method in the use of the exemplar patterns but quite different in the use of the most likely path finding of the dynamic programming. The pattern classification is performed well regardless of degree of the nonlinearity in class borders.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제54권9호
• /
• pp.408-413
• /
• 2005

This paper presents the basic design technology on the hybrid type GCB(gas circuit breakers) through the test results. The three type hybrid interrupters according to the arrangement of the thermal expansion chamber and the puffer cylinder(they are called 'serial type', ' parallel/exchanged type ,' and ' parallel/separated type ' respectively in this work) were designed and manufactured and then the tests of operating characteristics and interrupting were performed using a simplified synthetic test facility. The interruption capability with the type and the opening speed and the pressure rise which is required to interrupt were examined. The change of pressure rise with the number of interruption was given quantitatively and therefore the pressure rise can be predicted. Finally, it was shown that the interruption capability tends to increase with the increasing of opening speed in the puffer type; however, the hybrid type interrupter has a different interruption characteristic.

• Korea-Australia Rheology Journal
• /
• 제20권2호
• /
• pp.51-58
• /
• 2008

This paper describes a two-step Tikhonov regularization procedure for converting the steady shear data generated by parallel-disk viscometers, in the presence of wall slip, into a shear stress-shear rate function and a wall shear stress-slip velocity functions. If the material under test has a yield stress or a critical wall shear stress below which no slip is observed the method will also provide an estimate of these stresses. Amplification of measurement noise is kept under control by the introduction of two separate regularization parameters and Generalized Cross Validation is used to guide the selection of these parameters. The performance of this procedure is demonstrated by applying it to the parallel disk data of an oil-in-water emulsion, of a foam and of a mayonnaise.

• 산업공학
• /
• 제12권4호
• /
• pp.617-624
• /
• 1999

In order to maximize an availability of machine and utilization of space, the parallel machines scheduling problem with space limit is frequently discussed in the industrial field. In this paper, we consider a scheduling problem for assembly machine in ship engine assembly shop. This paper considers the parallel machine scheduling problem in which n jobs having different release times, due dates and space limits are to be scheduled on m parallel machines. The objective function is to minimize the sum of earliness and tardiness. To solve this problem, a heuristic is developed. The proposed heuristic is divided into three modules hierarchically: job selection, machine selection and job sequencing, solution improvement. To illustrate its effectiveness, a proposed heuristic is evaluated with a large number of randomly generated test problems based on the field situation. Through the computational experiment, we determine the job selection rule that is suitable to the problem situation considered in this paper and show the effectiveness of our heuristic.