• 전기학회논문지
• /
• 제66권4호
• /
• pp.643-650
• /
• 2017

This pap4er analyzes resonance characteristics of a slave motor that is not controlled by load and parameter differences between Dual motors during parallel operation in middle-low speed. Dual SPMSMs(Surface mounted Permanent Magnet Synchronous Motor) connected in parallel to a single inverter controlled by the master and slave control in this paper. Based on the stability analysis of the SPMSM for a variation of torque angle, the 6th nonlinear state equation of the torque angle variation in the SIMM(Single Inverter Multi Motor) structure is derived according to a mathematical model for the dual motors. In general, an analysis of the 6th order nonlinear state equation is complex. Therefore, a resonance frequency generated from the slave motor is found from the characteristic equation of the 2nd order system obtained by linearization and model reduction near steady state operation point. Through simulations and experiments, it is confirmed that the stability analysis of the SPMSMs and state equation models are useful for the variation of the torque angle analyzed in this paper.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제52권4호
• /
• pp.154-160
• /
• 2003

The switched reluctance motor(SRM) has a considerable potential for industrial applications because of its high reliability as a result of the absence of rotor windings. In some applications with SRM, a parallel switching strategy is often used for cost saving, increasing of current capacity and system reliability. This paper proposes a new parallel switching strategy of SRM using parallel winding. While conventional parallel switching devices are connected in a phase winding, power devices are connected in the parallel windings wound in each pole of stator in the proposed method. Paralleling strategy for current sharing in the proposed method can be easily determined without considerations of any nonlinear characteristics of power devices such as conduction resistance, threshold voltage and gain factor. The proposed paralleling strategy is verified by the mathematical analysis and experimental results.

• 대한전기학회논문지:전력기술부문A
• /
• 제52권4호
• /
• pp.154-154
• /
• 2003

The switched reluctance motor(SRM) has a considerable potential for industrial applications because of its high reliability as a result of the absence of rotor windings. In some applications with SRM, a parallel switching strategy is often used for cost saving, increasing of current capacity and system reliability. This paper proposes a new parallel switching strategy of SRM using parallel winding. While conventional parallel switching devices are connected in a phase winding, power devices are connected in the parallel windings wound in each pole of stator in the proposed method. Paralleling strategy for current sharing in the proposed method can be easily determined without considerations of any nonlinear characteristics of power devices such as conduction resistance, threshold voltage and gain factor. The proposed paralleling strategy is verified by the mathematical analysis and experimental results.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1998년도 추계종합학술대회 논문집
• /
• pp.429-432
• /
• 1998

This paper is to design stable fuzzy controller so as to control chaotic nonlinear systems effectively via fuzzy control system and Parallel Distributed Compensation (PDC) design. To design fuzzy control system, nonlinear systems are represented by Takagi-sugeno(TS) fuzzy models. The PDC is employed to design fuzzy controllers from the TS fuzzy models. The stability analysis and control design problems is to find a common Lyapunov function for a set of linear matrix inequalitys(LMIs). The designed fuzzy controller is applied to Rossler system. The simulation results show the effectiveness of our controller.

• 한국지능시스템학회논문지
• /
• 제10권2호
• /
• pp.152-160
• /
• 2000

본 논문에서는 확장된 병렬 분산 보상기와 최적 극점 배치 방법을 사용한 비선형 시스템의 퍼지 모델 기반 제어기의 분석과 설계 방법을 제안한다. 설계과정을 설명하면 먼저비선형 시스템을 Takagi-Sugeno 퍼지 모델로 표현하고 확장된 병렬 분산 보상기를 사용하여 제어기 규칙을 작성한다. 그리고 최적 극점 배치 방법을 사용하여 국소 상태 궤환 제어기를 설계하고 이를 이용하여 전체의 퍼지논리제어기를 설계한다. 기존의 사용된 병렬 분산 보상기와는 다르게 본 논문에서 새로이 개발된 확장된 병렬 분산 보상기와 최적 극점 배치 방법을 이용함으로써 안정한 국소 퍼지 제어기의 설계뿐만 아니라 추적 제어 목적도 수행할 수 있는 전체의 안정한 퍼지 제어기도 설계할 수 있다. 게다가 전체 퍼지 모델 뿐만 아니라 실제 비선형 시스템에 대해서도 안정도 분석을 행하였다 마지막으로 제안된 퍼지 모델 기반 제어기 설계 방법의 효율성과 가능성을 하나의 시뮬레이션 예를 통하여 증명하였다.

• 대한전기학회논문지:시스템및제어부문D
• /
• 제49권8호
• /
• pp.407-414
• /
• 2000

This paper addresses the analysis and design of fuzzy control systems for a class of complex uncertain single-input single-output nonlinear systems. The proposed method represents the nonlinear system using a Takagi-Cugeno fuzzy model and construct a global fuzzy logic controller by blending all local state feedback controllers with a sliding mode controller. Unlike the commonly used parallel distributed compensation technique, we can design a global stable fuzzy controller without finding a common Lyapunov function for all local control systems, and can obtain good tracking performance by using sliding mode control theory. Furthermore, stability analysis is carried out not for the fuzzy model but for the real nonlinear system with uncertainties. Duffing forced oscillation sysmte is used as an example to show the effectiveness and feasibility of the proposed method.

• Coupled systems mechanics
• /
• 제12권3호
• /
• pp.221-239
• /
• 2023

In our research, we have proposed a solid solution for aviation analysis which can ensure the asymptotic stability of coupled nonlinear plants, according to the theoretical solutions and demonstrated method. Because this solution employed the scheme of specific novel theorem of control, the controllers are artificially combined by the parallel distribution computation to have a feasible solution given the random coupled systems with aviation stability analysis. Therefore, we empathize and manually derive the results which shows the utilized lemma and criterion are believed effective and efficient for aircraft structural analysis of composite and nonlinear scenarios. To be fair, the experiment by numerical computation and calculations were explained the perfectness of the methodology we provided in the research.

• 대한토목학회논문집
• /
• 제7권4호
• /
• pp.13-20
• /
• 1987

본(本) 연구(硏究)에서는 비선형(非線型) 구조(構造)의 설계민감도(設計敏感度) 해석법(解釋法)을 비선형(非線型) 유한요소(有限要素) 구조해석법(構造解析法)에 대응(對應)하여 개발(開發)하고 이들을 수치예(數値例)를 통(通)하여 평가(評價)하였다. 비선형(非線型) 구조해석법(構造解析法)과 설계민감도(設計敏感度) 해석법(解析法)은 밀접한 관계(關係)를 가지므로, 시칸트강도(剛度)를 이용(利用)한 직접분해법(直接分解法) 및 반복해법(反復解法)과 탄젠트강도(剛度)의 직접사용법(直接使用法)을 유도(誘導) 제시(提示)하였다. 이론적(理論的) 고찰(考察) 및 수치예(數値例)로부터, 구조해석(構造解析) 및 설계민감도해석(設計敏感度解釋)의 연반과정(連攀過程)에서 탄젠트강도법(剛度法)의 효율성(効率性)을 확인(確認)하였다.

• Journal of applied mathematics & informatics
• /
• 제24권1_2호
• /
• pp.333-342
• /
• 2007

A nonsmooth PGD scheme for minimizing a nonsmooth convex function is presented. In the parallelization step of the algorithm, a method due to Pang, Han and Pangaraj (1991), [7], is employed to solve a subproblem for constructing search directions. The convergence analysis is given as well.

• 한국항공우주학회지
• /
• 제30권8호
• /
• pp.46-55
• /
• 2002

본 연구에서는 저가형 PC-클러스터 환경에서 운영 가능한 고속 병렬처리 기법을 활용하여 전기체 항공기 및 발사체 형상을 고려할 수 있는 천음속/초음속 비선형 플러터 해석시스템을 개발하였다. 이는 이론적으로 진보된 수치해석 기법인 전산구조동역학(CSD), 유한요소법(FEM) 및 전산유체역학(CFD) 기법을 동시에 연계하고 있으며, 각종 비행체의 공탄성안정성 설계 과정에서 공학적으로 매우 정밀한 데이터 제공이 가능하다. 개발된 공탄성 해석시스템의 뛰어난 응용성을 보이기 위해 국내에서 개발 중인 초음속 항공기의 전기체 형상에 대해 천음속/초음속 비선형 공탄성 해석을 수행하였다.