• 한국인쇄학회지
• /
• 제7권1호
• /
• pp.49-59
• /
• 1989

This study was made to Investigate the effect of tensile strength(kg/cm$^{2}$), opacity(%), porosity(cc/min) of the paper manufacturing with the freeness properties of NBKP and the calcium carbonate having the different physical and chemical properties. As the results, the opacity and porosity of the freeness of, NBKP, obtained good strength properties from the freeness 65$^{\circ}$SR and the tensile strength from the freeness 85$^{\circ}$SR. The strength properties of paper manufacturing loaded with calcium carbonate appears to be related to the effect of the freeness, and it was obtained the good results at opacity 83.8% in the freeness 85$^{\circ}$SR, tensile strength 3.8kg/m$^{2}$ porosity 87cc/min in the freeness 65$^{\circ}$SR. Addition of 50%, 55%, 60% CaCO$_{3}$ was found to increase slightly the strength properties of paper.

• 펄프종이기술
• /
• 제42권4호
• /
• pp.33-38
• /
• 2010

The effects of fillers on the wet end dewatering and paper properties were investigated in order to confirm the possibility that the fillers can be used as a means for saving energy in papermaking process. The performance of GCC, PCC and talcs were evaluated. The dewatering in wire and wet press was improved by the increase of filler addition, but it was observed that the dewatering behavior was depended by the filler characteristics. PCC was superior to other fillers in the bulk, opacity, air permeability and stiffness while the lowest tensile and burst index were obtained. We found that the response on the wet end dewatering and paper properties were affected greatly by the filler characteristics including particle shape and size.

• 펄프종이기술
• /
• 제30권1호
• /
• pp.7-17
• /
• 1998

With the advent of CLSM in the end of 1980s, it has been applied to the field of pulp and paper science in various ways. This study showed the potentials of CLSM In analyzing a change of pulp fiber and paper properties before and after mechanical treatment. In particular, a quantification of internal fibrillation has been done using cross-sectional images of fibers and image analysis technique, then evaluated the effects of fiber wall delamination on fiber and paper properties. It showed that the delaminated fibers were closely associated to development of the interfiber bonding in a fiber network. The CLSM made it possible to investigate a density profile along the sheet thickness, which was created by some papermaking processes like pressing, drying and calendering. Through the attempt to observe the forming procedure of a fiber network during handsheet making, the CLSM images showed that the pressing stage was considered greatly to contribute to generation of interfiber bonding with removing a free water and partly a bound water between fibers. In addition, the CLSM could be used to illustrate not only a surface profile of paper showing the extent of smoothness or roughness, but also a density profile in a B-direction of the network. Finally it became evident that the CLSM could be used as an excellent tool to predict development in fiber and paper properties before and after mechanical treatment during papermaking processes.

• 펄프종이기술
• /
• 제43권4호
• /
• pp.1-10
• /
• 2011

Beating or refining is an energy intensive process in paper industry. In India, most of the paper industries blend long fibered softwood pulps with short fibered hardwood or agro based pulps to get the paper properties of competitive level. Refining characteristics of the blend of pulps is very crucial with respect to freeness and strength properties. This study has been carried out to understand the refining behavior of three hardwood pulps and a softwood pulp. The hardwood and softwood pulps are blended in different proportions in two different ways; a) blending after their separate refining, and b) blending before refining followed by mixed refining of the blended pulps. Freeness of pulp, strength, optical and surface properties of paper along with formation have been determined and compared for both the refining methods. The fiber classification of refined pulps was also carried out to analyze the effect of refining method on fiber morphology. The mixed refining of hardwood and softwood pulps marginally affects the fiber morphology in comparison to separate refining of pulps. The strength and other properties of paper prepared from mixed refining of pulps are either better or comparable than those of separately refined pulps.

• 펄프종이기술
• /
• 제35권1호
• /
• pp.1-6
• /
• 2003

This study was carried out to investigate the effect of internal fibrillation on the pulp and paper properties. The internal fibrillation was introduced into the SwBKP and recycled SwBKP by the mechanical treatment with Hobart mixer. WRV and physical properties of SwBKP were improved by the internal fibrillation. However the mechanical treatment of recycled SwBKP resulted in the decrease of strength properties of paper except for the tear index, although it was observed that WRV was somewhat increased by the mechanical treatment. The decrease of strength properties of recycled SwBKP might be caused by the hornification of fiber and the decrease of fiber strength.

• 펄프종이기술
• /
• 제47권3호
• /
• pp.47-54
• /
• 2015

In this study, effects of kneading treatment on the properties of hardwood bleached kraft pulp (HwBKP), softwood bleached kraft pulp (SwBKP) and hardwood bleached chemi-thermo-mechanical pulp (HwBCTMP) were elucidated with a laboratory two-shaft kneader. Kneading treatment was performed at 30% (w/w) of pulp concentration and the number of passes through the kneader was adjusted from 0 to 10 passes. Then, changes in properties of pulp fibers were evaluated. It was found that fiber characteristics were influenced by kneading treatment. Fiber length was decreased with kneading while other morphological properties such as fiber width, curl and kink became increased as the number of passes through the kneader increased from 0 to 5 passes. The magnitude of changes in the morphological properties of softwood chemical pulp was the largest, followed by hardwood chemical pulp. The morphological properties of HwBCTMP were little influenced by kneading treatment. Swelling of fiber measured by WRV was increased with kneading except of HwBCTMP.

• 펄프종이기술
• /
• 제35권1호
• /
• pp.13-18
• /
• 2003

This study was done in an effort to evaluate the possibility of recyclability of moisture-proof paper. Because it is difficult to recycle laminated moisture-proof paper, a mixture of styrene-butadiene latex(SB latex) and wax emulsion was used as moisture-proof paper chemicals. A bar coater was applied to make moisture-proof paper and the coated weight was 17 g/$m^2$. The mixing ratios of SB latex to wax emulsion were 85 : 15, 87 : 13, and 90 : 10, respectively. It was observed that the moisture-proof paper treated with SB latex and wax emulsion at the appropriate ratio could be recycled effectively. The moisture-proof paper was similar to base paper in degree of pulping, and there was no significant difference in dispersion between moisture-proof paper and base paper. Most of wax particle which caused the spots during drying process could be removed by flotation process. Tensile strength and tear strength of handsheets made of both moisture-proof paper and base paper after pulping was measured to examine the fiber bonding and no significant difference in mechanical properties was observed.

• 펄프종이기술
• /
• 제46권3호
• /
• pp.81-87
• /
• 2014

Conditions of paper manufacturing process should be changed depending on the end use and paper properties. Most of the case, mixed pulps with long softwood fibers and short hardwood fibers are used to achieve proper qualities of product with reasonable production cost. For specialty paper manufacture the wood pulp and cotton linter pulp are usually mixed together. The objectives of this study is to analyze physical, mechanical and fracture mechanical properties of paper depending on SwBKP, HwBKP and cotton linter pulp(CLP) mixing. When the mixing ratio of SwBKP was increased, strength properties, such as tensile, tear, and folding endurance, were also increased. When the mixing ratio of SwBKP and HwBKP was increased, stress concentration index was decreased and fracture toughness was increased.

• 펄프종이기술
• /
• 제45권6호
• /
• pp.36-43
• /
• 2013

Effects of blending of PCC manufactured with emission gas occurred at mill on the characteristics of coating color, optical and printing properties of coated paper were investigated in order to evaluate the possibility of its use as a raw material for producing environmentally friendly coated paper. Low shear viscosity and water retention value of ground PCC 1(d50 = $6.303{\mu}m$) were higher than those of ground PCC 2(d50 = $3.149{\mu}m$). Ink set properties of ground PCC 1 and ground PCC 2 were inferior to that of PCC 3. Thus, the reducing of particle size was required in order to overcome the inferior ink set properties. Ground PCC 1 had a similar properties to clay, and it showed the possibility that ground PCC 1 could be used to produce matte grade coated papers. However, it was required to improve the stability(particle shape, particle size, and compatibility with chemicals used in coating color formulation) in the case of blending with GCC in order to keep the qualities of coated paper.

• Journal of Forest and Environmental Science
• /
• 제14권1호
• /
• pp.89-100
• /
• 1998

본 연구는 제지 원료의 효율적 이용 및 기능의 최적화를 위한 수단으로 사용되고 있는 다층구조화에 따른 종이의 내부응력 및 물성의 변화를 조사하기 위하여 수행되었다. 또한 최근 사용량이 급증되고 있는 재생섬유를 다층구조에 도입할 경우 수반되는 종이의 물성 변화도 조사되었다. 펄프의 고해처리는 단층지의 내부응력을 증가시켜준 반면 충전제의 사용은 내부응력을 감소시켰다. 종이의 다층구조화는 인열지수를 제외한 대부분의 종이물성과 내부응력을 감소시켰으며, 이러한 변화는 사용된 펄프의 종류, 고해수준, 원료의 배합 방법에 따라 다양하게 나타났다. 충전시에는 충전제를 외층 또는 내층에 사용함으로써 단층지보다 우수한 내부응력 및 종이물성을 얻을 수 있었다. 재생섬유를 사용할 때는 다층구조화를 통하여 투기도와 빳빳이의 개선이 가능하였으나, 파열지수가 감소되었다.