• Fashion & Textile Research Journal
• /
• v.22 no.3
• /
• pp.368-377
• /
• 2020

This study provided basic data to develop functional and fitness cycling wear for cyclists. We analyzed the domestic and overseas cycling wear brand patterns for tops and tights as well as compared pads attached to tights. The results were as follows. The tops of the cycling wear were designed with cutting lines in the lateral or yoke in the back to reflect cycling posture. It is necessary to study if there is a difference in the air resistance or fitness of the athlete. The sleeve hem band affected by arm movement during cycling, proper sewing and band pressure are also important. The tights have a brand that does not insert a band in front of the waist in consideration of the cyclist's breathing. It should take into account methods of constructing a proper garment pressure that does not interfere with cycling. Analyzing the cycling pad indicated that the three-dimensional shape and size of the pad show many differences for each brand, indicating a difference in cycling movement suitability. In addition, many of the cutting lines should account for the productive aspects because of the high consumption of the fabric in order to design a pattern considering the cycling posture.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.42 no.4
• /
• pp.612-625
• /
• 2018

This study designed 16 kinds of basic structure and 4 kinds of modified structure for impact protection pads with a spacer fabric shape. The pad is a structure in which hexagonal three-dimensional units, composed of a surface layer and a spacer layer, are interconnected. Designed pads were printed with flexible $NinjaFlex^{(R)}$ materials using a FDM 3D printer. The printed pads were evaluated for impact protection performance, compression properties and sensory properties. The evaluation of the impact protection performance indicated that basic structures better than CR foam material at 20cm height were DV1.5, DX1.5, DX1.0, DV1.0 and HV1.5. The evaluation of the compression properties for the five types, with good results in the impact protection performance, indicated that DV1.0, DX1.0, DV1.5, HV1.5 and DX1.5 showed good results, respectively. The sensory evaluation of DV1.0, DX1.0, and DV1.5, which with good results when considering both the impact protection performance and the compression performance, showed that DV1.0 were the best for surface, flexibility, compression and weight. Therefore, DV1.0 is shown to be the best structure for protection pads.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.9 no.4
• /
• pp.419-427
• /
• 2016

In this paper, a 64b small-area MTP memory IP is designed. A VPPL (=VPP/3) regulator and a VNN (=VNN/3) charge pump are removed since the inhibit voltages of an MTP memory cell are all 0V instead of the conventional voltages of VPP/3 and VNN/3. Also, a VPP charge pump is removed since the VPP program voltage is supplied from an external pad. Furthermore, a VNN charge pump is designed to provide its voltage of -VPP as a one-stage negative charge pump using the VPP voltage. The layout size of the designed 64b MTP memory IP with MagnaChip's $0.18{\mu}m$ BCD process is $377.585{\mu}m{\times}328.265{\mu}m$ (=0.124mm2). Its DC-DC converter related layout size is 76.4 percent smaller than its conventional counterpart.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.11a
• /
• pp.136-139
• /
• 2004

The requirement of planarity, such as with-in-wafer nonuniformity, post thickness range, have become increasingly stringent as critical dimensions of devices are decreased and a better control of a planarity become important. The key factors influencing the planarity capability of the CMP process have been well understood through numerous related experiments. These usually include parameters such as process pressures, relative velocities, slurry temperature, polishing pad materials and polishing head structure. Many study have been done about polishing pad and its groove structure because it's considered as one of the key factors which can decide wafer uniformity directly. But, not many study have been done about polisher head structure, especially about polisher head plate design. The purpose of this paper is to know how the plate structure can affect wafer uniformity and how to deteriorate wafer yield. Furthermore, we studied several new designed plate to improve wafer uniformity and also improve wafer yield.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.48 no.7
• /
• pp.76-81
• /
• 2011

A new via cutting structure in 2-layer DRAM package substrate has been fabricated to lower its power distribution network(PDN) impedance. In new structure, part of the via is cut off vertically and its remaining part is designed to connect directly with the bonding pad on the package substrate. These via structure and substrate design not only provide high routing density but also improve the PDN impedance by shortening effectively the path from bonding pad to VSSQ plane. An additional process is not necessary to fabricate the via cutting structure because its structure is completed at the same time during a process of window area formation. Also, burr occurrence is minimized by filling the via-hole inside with a solder resist. 3-dimensional electromagnetic field simulation and S-parameter measurement are carried out in order to validate the effects of via cutting structure and VDDQ/VSSQ placement on the PDN impedance. New DRAM package substrate has a superior PDN impedance with a wide frequency range. This result shows that via cutting structure and power/ground placement are effective in reducing the PDN impedance.

• Journal of the Korea Society of Computer and Information
• /
• v.19 no.8
• /
• pp.95-106
• /
• 2014

In this paper, we design a smart phone UX/UI and a tap pattern recognition algorithm that can recognize tap patterns from a tapping user's fingers on the screen, and implement an application that provides user-customizable smart phones's services from the tap patterns. A user can generate a pattern by tapping the input pad several times and register it by using a smart phone's favorite program. More specifically, when the user inputs a tap pattern on the input pad, the proposed application searches a stored similar tap pattern and can run a service registered on it by measuring tap pattern similarity. Our experimental results show that the proposed method helps to guarantee the higher recognition rate and shorter input time for a variety of tap patterns.

• Journal of The Korean Society of Integrative Medicine
• /
• v.1 no.3
• /
• pp.63-78
• /
• 2013

PURPOSE : This study aims to investigate the positive correlation in pre-post test design between squat exercise on different baseform and the static/dynamic balance ability enhancement in adults. METHOD : This clinical study was designed into three different random-sampling adult groups (flat, balanced, vibration exercise device) and performed squat exercise. The static/dynamic balance ability was measured prior to the intervention and vice-versa. Balance was examined using the balance master 7.0 version systems. RESULT : 1) After the intervention, the controlled mat group in mCTSIB has showned the minimal mean value and the variation regards as acceptable by statistic value. 2) After the intervention, The mean value of LOS shows the minimal average variation in Randomised Trials, but the other two trials shows the maximal fluctuation. The difference variation regards as acceptable statistic value. 3)After the intervention, the mean value of mat group measrued as the maximal results, the difference variation regards as acceptable statistic value. 4)The striking correlation difference at mCTSIB has found in the vibration device exercise group, but LOS and Rhythmic W-S showed the correaltion in Mat group. CONCLUSION : The study found the positive correlation that enhanced balance ability on the different dynamic baseform squat exercise than static baseform environment. The significant difference found the balance pad squat effects on developing balance ability and the correlationship regards as statistically significant value.

• Asian-Australasian Journal of Animal Sciences
• /
• v.17 no.1
• /
• pp.102-108
• /
• 2004

The present experiment was conducted to assess the efficacy of methionine hydroxy analogue free fatty acid (MHAFA) in comparison to DL-methionine (DL-Met) utilizing day-old commercial broiler chicks (n=300). The chicks were randomly distributed into 30 groups of 10 chicks each. Three dietary treatments, viz. D1-maize-soybean meal based basal diet (Control), D2- control diet supplemented with DL- methionine to meet its requirements and D3-control supplemented with MHA-FA @ 1.54 times of DL-methionine used in D2, were formulated. Each dietary treatment was offered to 10 replicated groups of chicks following completely random design (CRD). The chicks fed on supplemental DL-Met had significantly higher (p<0.01) gain in body weight, followed by MHA-FA group and control during 0-3 weeks of age. During overall growth period (0-6 weeks), chicks in DL-Met and MHA-FA groups grew better (p<0.01) than those in control. Feed conversion ratio (FCR) improved (p<0.01) on supplementation of either DL- Met or MHA-FA in the basal (Control) diet during 0-3 weeks of age. The FCR for overall period, however, did not differ statistically (p>0.05) amongst the treatments. The eviscerated yields emanated from diets with DL-Met or MHA-FA were higher (p<0.01) than that in Control. Abdominal fat pad was also more (p<0.01) in broilers fed control diet than in DL-Met or MHA-FA supplemented group. Breast yield was higher (p<0.05) in MHA-FA fed broilers than those fed DL-methionine supplemented or un-supplemented diets. The efficacy of MHA-FA in comparison to DL-Met for growth was 62.11, 64.82 and 63.88% and for feed efficiency was 62.98, 67.73 and 64.01% at 0-3, 3-6 and 0-6 weeks of age, respectively, while it was 65.85, 71.40 and 67.49% for eviscerated yield, abdominal fat pad reduction and breast yield at 6 weeks of age, respectively.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.32 no.1
• /
• pp.123-133
• /
• 2008

The purpose of this study is to analyze dissatisfaction and size appropriateness of the women with big breast for design the high functional big size brassiere. The data were collected from 179 women(between the ages of 20 and 39) residing in Gwang-ju using a questionnaire to purchase, wearing comfort, dissatisfaction of the size, wire and the pad of the big size brassiere. The data were analyzed with Chi-square test, t-test and ANOVA using statistical program SPSS 12.0. The results of this research are as follows; 1) Seven-two-point-two percent of the women with big breast more than C cup size polled said they had difficulty in looking for the suitable size of the brassiere and they usually weared the smaller size than the their own size. As a result, they felt inconvenience for the discord with the nipples and lack of the shape revision. 2) According to the result of the correlation analysis, breast size and Rohrer's index showed low correlation. 3) After dividing all respondents for this research into categories of the group of more than C cup and less than B cup the differences in responses were compared. The dissatisfaction with brassier were 'discord of cup size', 'pain due to the wire' and 'unnatural breast shape' in the group of more than C cup, compared to 'discord of cup size' and 'deformation of the wire and pad' in the group of less than B cup.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.22 no.2
• /
• pp.199-207
• /
• 2011

A Ku-band low noise amplifier has been designed and fabricated by using 0.25 um SiGe BiCMOS process. The developed Ku-band LNA RFIC which has been designed with hetero-junction bipolar transistor(HBT) in the BiCMOS process have noise figure about 2.0 dB and linear gain over 19 dB in the frequency range from 9 GHz to 14 GHz. Optimization technique for p-tap value and electro-magnetic(EM) simulation technique had been used to overcome the inaccuracy in the PDK provided from the foundry service company and to supply the insufficient inductor library. The finally fabricated low noise amplifier of two fabrication runs has been implemented with the size of $0.65\;mm{\times}0.55\;mm$. The pure amplifier circuit layout with the reduced size of $0.4\;mm{\times}0.4\;mm$ without the input and output RF pads and DC bais pads has been incorporated as low noise amplication stages in the multi-function RFIC for the active phased array antenna of Ku-band satellite VSAT.