• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.17 no.5
• /
• pp.515-520
• /
• 2004

We report on the development of a Piezoelectric valvc that is designed to have a high reliability for fluid control systems, such as mass flow control, transportation and chemical analysis. The valve was fabricated using a MCA(multilayer ceramic actuator), which has a low consumption power, high resolution and accurate control. The fabricated valve is composed of MCA, a valve actuator die and an seat die. The design of the actuator dic was done by FEM(finite element method) modeling, respectively. And, the valve seat die with 6 trenches was made. and the actuator die, which possible to optimize control to MCA, was fabricated. After Si-wafer direct bonding between the seat die and the actuator die, MCA was also anodic bonded to the scat/actuator die structure. PDMS(poly dimethylsiloxane) sealing pad was fabricated to minimize a leak-rate. It was also bonded to scat die and stainless steel package. The flow rate was 9.13 sccm at a supplied voltage of 100 V with a 50 % duty ratio and non-linearity was 2.24 % FS. From these results, the fabricated MCA valve is suitable for a variety of flow control equipments, a medical bio-system, semiconductor fabrication process, automobile and air transportation industry with low cost, batch recess and mass production.

• Textile Coloration and Finishing
• /
• v.26 no.2
• /
• pp.131-142
• /
• 2014

This paper was focused on investigating synthetic fabrics treated with persimmon juice by padding mangle repeatedly. The merit of dyeing by pad-dry method was easier color reproduction than dyeing by immersion method. With increasing number of padding, the dyed nylon fabrics showed deeper yellow-red colors, but dyed polyester fabrics had no uniform tendency. The dyed synthetic fabrics had a 3rd grade of ligtht, 4~5th grade of perspiration fastness, 5th grade of stain washing fastness, and 3~5th grade of rubbing fastness. As the number of padding and exposed time to sunlight or UV light increase, the value of K/S and ${\Delta}E$ increased and the colors become much deeper gradually. The color development had completed about 70 hours exposure to UV light. As the padding time of dyeing with persimmon juice increased, stiffness and water repellent property were enhanced, respectively. Also, the dyed synthetic fabrics had good antibacterial activity and deodorization.

• Textile Coloration and Finishing
• /
• v.25 no.4
• /
• pp.292-302
• /
• 2013

Cotton fabrics treated with hybrid materials were developed and prepared. A halogen-free flame retardant and an aromatic amide were blended and applied to cotton fabrics. Thermal and physical properties of the treated cotton fabrics were investigated. The surface of the pure and coated cotton fabrics was characterized by Fourier transform infrared spectroscopy. The elemental composition of the coated surface of the cotton fabric was measured using X-ray photoelectron spectroscopy and compared with that of pure cotton fabric. After being solved in N,N-dimethylacetamide, m-aramid and triphenylphosphine oxide (TPP) were applied to cotton fabrics through a dip-pad-coagulation process. The treated cotton fabrics with recycled m-aramid/TPP resulted in increased limited oxygen index values and thermal resistance.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.33 no.3
• /
• pp.379-390
• /
• 2009

This Study is a research on symbolic meaning and artist's will of Vivienne Westwood's works which provide a new vision on woman's body and clothes. For the literary research, this study investigates theories of human's body which are phenomenal body of Merleau-Ponty's, the relations between power and body of M. Foucault's, cultural and social body of E. Goffman's and habitus of p, Bourdieu's. For the case research, Vivienne Westwood's collections are classified into each item which exaggerating and distorting woman's body such as Mini-Crini, corset, bustle cushion, bum-pad, farthingale and tailoring suits. Also she puts man's clothes item such as codpiece into woman's body. Through all of these design, she wants to reinterpret the woman's body and self-identity. Vivienne Westwood dose not leave the past just as a historic trace but recreates with her way of creation. Westwood has presented the satire which leads the parody of past in her unique ways of thinking and interpretation which mix the ideology of the past and the presents. Those make her look back the history and culture and express her esteem for self-identity of woman. Vivienne Westwood's works express woman's power and freedom in modem society.

• Aerospace Engineering and Technology
• /
• v.3 no.1
• /
• pp.222-231
• /
• 2004

LCS(Launch Control System) in Space Center performs the ground and flight tests of launch vehicle. Those tests require data monitoring and control functions to the external systems such as launch vehicle, launch pad, and propellant supply system, etc. The LCS is composed of real time control system, simulation system, data server, external network, etc. The purpose of the simulation system is to simulate launch vehicle, and it is used for evaluation test of the LCS. This paper described the simulation system overview, the concept design, and the real time data processing evaluation tests of the simulator, gateway, data distribution server which are constituents of the simulation system.

• The Research Journal of the Costume Culture
• /
• v.8 no.1
• /
• pp.123-132
• /
• 2000

When adding shoulder pads to clothing, the shoulder pads brings down the quality of armpit area and the width of shoulder area, 1.5㎝ thick non-woven shoulder pads are good for sensory evaluation but do not function as well. Therefore this study has done to come up with a solution to satisfy both sensory evaluation and functionality. The study did was by using laboratory blouses with three different types of shoulder pads, which were two different armpit depths (1.0㎝, 2.0㎝), 3 types of armpit widths (0.5㎝, 1.0㎝, 1.5㎝). The Result are as followed : 1. The sensory evaluation was affected the most by the armpit depths and shoulder lengths. 2. There were two results for the best sensory evaluation, they were the one with a pad of armpit depth of 1.0㎝, armpit width of 1.5㎝, and shoulder width of 1.5㎝. 3. The functionality was affected in an order of movement, armpit width, and shoulder width. 4. The two results for the best functionality were the one with shoulder pads of armpit depth of 1.0㎝, armpit width of 1.5㎝, and shoulder width of 1.5㎝, and the one with armpit depth of 1.0㎝, armpit width 1.5㎝, and shoulder width of 1.5㎝. 5. In conclusion, 1.2㎝ nonwoven shoulder pads on a blouse with a pattern of armpit depth of 1.0㎝, armpit width of 1.5㎝, and shoulder width of 0.5㎝ will satisfy both sensory evaluation and functionality at the same time.

• Korean Journal of Food Science and Technology
• /
• v.21 no.2
• /
• pp.258-261
• /
• 1989

Corrugated paperboard box is used to package of agricultural, fishery and industrial products in Korea. Test of compression strength results as follows. Compressing strength according to the insertion of inner pad was improved in 9.0% to 48.5%, Slitting length and width in 3.0% to 16.0% Compression strength according to the position of transportation hole was different 1.6% to 10.1%, the jointing method 7% to 10.3%, the printing width was decreased in 18.4% to 19.1%.

• Journal of Institute of Control, Robotics and Systems
• /
• v.14 no.6
• /
• pp.543-547
• /
• 2008

In the paper, we develop the ultrasonic bonding technique for LCD driver chips having small size and high pin-density. In general, the mounting technology for LCD driver ICs is a thermo-compression method utilizing the ACF (An-isotropic Conductive Film). The major drawback of the conventional approach is the long process time. It will be shown that the conventional ACF method based on thermo-compression can be remarkably enhanced by employing the ultrasonic bonding technique in terms of bonding time. The proposed approach is to apply the ultrasonic energy together with the thermo-compression methodology for the ACF bonding process. To this end, we design a bonding head that enables pre-heating, pressure and ultrasonic excitation. Through the bonding experiments mainly with LCD driver ICs, we present the procedures to select the best combination of process parameters with analysis. We investigate the effects of bonding pressure, bonding time, pre-heating temperature before bonding, and the power level of ultrasonic energy. The addition of ultrasonic excitation to the thermo-compression method reduces the pre-heating temperature and the bonding process time while keeping the quality bonding between the LCD pad and the driver IC. The proposed concept will be verified and demonstrated with experimental results.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.13 no.5
• /
• pp.155-161
• /
• 2013

This paper presented an augmented reality based mobile application of maintenance and management for concrete bridges. For the development of augmented reality system, it was necessary to establish the concrete bridges detail information and history of maintenance that build the database of those. Also, the augmented reality based system required that concrete bridge information presented by the mobile smart phone. Therefore, this study developed an augmented reality based concrete bridge information mobile application-All about Bridge based on android smart phone and smart pad. The proposed All about Bridge application supports a various bridge informations simultaneously using smart phone and augmented reality technology.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.31A no.6
• /
• pp.88-97
• /
• 1994

We describe the design, fabrication, and performance of the optical fiber-photodiode 1$\times$12 arry module using mesa-type InS10.53T GaS10.47TAS/INP 1$\times$12 PIN photodiode array. We fabricated the PIN PD array for high-speed optical fiber parallel data link optimizing quantum efficiency, operating speed sensitivity from the PIN-FET structure, and electrical AC crosstalk. For each element of the array, the diameter of the photodetective area is 80 $\mu$m, the diameter of the p-metal pad is 90 $\mu$m, and the photodiode seperation is 250 $\mu$m to use Si v-groove. Ground conductor line is placed around diodes and p-metal pads are formed in zigzag to reduce Ac capacitance coupling between array elements. The dark current (IS1dT) is I nA and the capacitance(CS1pDT) is 0.9 pF at -5 V. No signifcant variations of IS1dT and CPD from element to element in the array were observed. We calulated the coupling efficiency for 10/125 SMF and 50/125 GI MMF, and measured the responsivity of the PD array at the wavelength is 1.55 $\mu$ m. Responsivities are 0.93 A/W for SMF and 0.96 A/W for MMF. The optical fiber-PD array module is useful in numerous high speed digital and analog photonic system applications.