• Title/Summary/Keyword: package method

Search Result 1,419, Processing Time 0.032 seconds

Novel Power Bus Design Method for High-Speed Digital Boards (고속 디지털 보드를 위한 새로운 전압 버스 설계 방법)

  • Wee, Jae-Kyung
    • Journal of the Institute of Electronics Engineers of Korea SD
    • /
    • v.43 no.12 s.354
    • /
    • pp.23-32
    • /
    • 2006
  • Fast and accurate power bus design (FAPUD) method for multi-layers high-speed digital boards is devised for the power supply network design tool for accurate and precise high speed board. FAPUD is constructed, based on two main algorithms of the PBEC (Path Based Equivalent Circuit) model and the network synthesis method. The PBEC model exploits simple arithmetic expressions of the lumped 1-D circuit model from the electrical parameters of a 2-D power distribution network. The circuit level design based on PBEC is carried with the proposed regional approach. The circuit level design directly calculates and determines the size of on-chip decoupling capacitors, the size and the location of off-chip decoupling capacitors, and the effective inductances of the package power bus. As a design output, a lumped circuit model and a pre-layout of the power bus including a whole decoupling capacitors are obtained after processing FAPUD. In the tuning procedure, the board re-optimization considering simultaneous switching noise (SSN) added by I/O switching can be carried out because the I/O switching effect on a power supply noise can be estimated over the operation frequency range with the lumped circuit model. Furthermore, if a design changes or needs to be tuned, FAPUD can modify design by replacing decoupling capacitors without consuming other design resources. Finally, FAPUD is accurate compared with conventional PEEC-based design tools, and its design time is 10 times faster than that of conventional PEEC-based design tools.

Effects of Packaging Method on Physico-chemical Properties of Korean Beef (포장방법이 냉장 쇠고기의 이화학적 성질 변화에 미치는 영향)

  • 김대곤;이신호;김수민;석영수;성삼경
    • Journal of the Korean Society of Food Science and Nutrition
    • /
    • v.25 no.6
    • /
    • pp.944-950
    • /
    • 1996
  • The purpose of our study is to investigate the changes of physico-chemical properties according to packaging methods(vacuum packaged with polyamide/polyethylene, air packaged with polyvynyl-chloride) and illumination on the properties of Hanwoo beef. pH value in vacuum packaged beef tended to be decreased, but pH value in air packaged beef tended to be increased during storage for 21 days, irrespective of illumination. Contents of volatile basic nitrogen(VBN) and thiobarbituric acid(TBA) values were increased, regardless of packaging methods. However, vacuum packaged beef showed lower VBN, TBA values than those of air packaged beef. Red color(CIE a value) was also decreased. Regardless of packaging method, saturated fatty acids(SFAs) were increased, but unsaturated fatty acids(UFAs) were relatively decreased. And in the ratio of the UFA/SFA, vacuum packaged beef had lower UFA/SFA ratio than that of air packaged beef. In this study, the effect of illumination did not change on physico-chemical properties in Hanwoo beef. In conclusion, the results indicate that the vacuum packaging treatment was more important to prolong the shelf-life of Hanwoo beef than air packaging method.

  • PDF

Change in Periodontal Status by Professional Toothbrushing, and Patients' Satisfaction (전문가잇솔질에 의한 치주상태 변화와 환자만족도)

  • Kim, Chang-Hee;Kim, Jin;Kim, Chang-Woog
    • Journal of dental hygiene science
    • /
    • v.8 no.4
    • /
    • pp.261-266
    • /
    • 2008
  • The purpose of this study was to examine the effects of the toothpick method, one of professional toothbrushing methods, on the prevention of periodontal diseases and the satisfaction level of patients with that. The subjects in this study were 33 patients who included 16 men and 17 women. After the toothpick method was applied to the selected patients from January 9 to February 28, 2008, the collected data were analyzed with SPSS (Statistical Package for the Social Science) 12.0 program. The findings of the study were as follows: First, the patients investigated showed a 0.71 reduction in PI than in the past. The index of bleeding upon probing stood at 5.12, which dropped from 8.09 in the beginning. Second, the patients gave a mean of 4.20 to the professional toothbrushing out of possible five points, which showed that they expressed satisfaction with that. Third, as for the relationship between general characteristics and satisfaction level, the women were more satisfied with that ($4.25{\pm}0.33$). By age group, those who were in their 60s and up found that more satisfactory ($4.31{\pm}0.30$). Fourth, as to changes in oral symptoms by gender, the largest number of the men and women considered their gums to become healthier after the professional toothbrushing was applied. The above-mentioned findings suggested that dental institutions should be equipped with well-educated oral health care personnels who are responsible for the periodontal health of patients, and the development of oral health promotion programs is urgently required as well.

  • PDF

3D Precision Measurement of Scanning Moire Using Line Scan Camera (라인스캔 카메라를 이용한 3차원 정밀 측정)

  • Kim, Hyun-Ju;Yoon, Doo-Hyun;Kim, Hak-Il
    • Korean Journal of Optics and Photonics
    • /
    • v.19 no.5
    • /
    • pp.376-380
    • /
    • 2008
  • This paper presents the Projection Moire method using a line scan camera. The high resolution feature of a line scan camera makes it possible to scan an image quickly, thus enabling a much quicker 3D profile. This method uses a high resolution line scan camera making it possible to scan an image at high speed simultaneously measuring the 3D profile of a large FOV. When using a high resolution scan camera, a full FOV is scanned, thus requiring just one movement of a projection grating. As a result, the number of grating movements is reduced drastically. The end result is a faster and more accurate 3D measurement. Moving the grating too quickly causes vibration in the imaging system, which will normally be required to apply a stitching technique when using an area scan camera. However the technique is not required when using a line scan camera. Compared with the previous techniques, it has the advantages of simple hardware without moving mechanical parts - single exposure for obtaining three-dimensional information. A method using a high resolution line scan camera can be used in mass production to measure the bump height of wafers or the bump height of package substrates.

Rapid Preparation and Quality Control of $^{99m}Tc$-ECD, $MAG_3$ and MIBI using Microwave Heating and Sep-Pak Cartridges (마이크로웨이브와 Sep-Pak 카트리지를 이용한 $^{99m}Tc$-ECD, $MAG_3$, MIBI의 신속한 제조 및 정도관리)

  • Oh, Seung-Jun;Moon, Dae-Hyuk;Ryu, Jin-Sook;Lee, Hee-Kyung
    • The Korean Journal of Nuclear Medicine
    • /
    • v.33 no.4
    • /
    • pp.430-438
    • /
    • 1999
  • Purpose: We evaluated a rapid preparation procedures for the labeling and quality control of $^{99m}Tc$-ECD, $MAG_3$, and MIBI using microwave heating and Sep-Pak cartridges. Materials and Methods: $^{99m}Tc$ labeling of ECD, $MAG_3$, and MIBI kit preparation was performed according to the package inserts with microwave heating modification. Heating time was 10-15 sec, and heating was performed with 3 mm plastic bottle with screw cap to prevent radiation contamination. Labeling efficiency was obtained with $C_{18}$ or Alumina N Sep-Pak cartridges. Results: The radiochemical purity of $93{\sim}96%$ for $^{99m}Tc$-ECD and $95{\sim}99%$ for $^{99m}Tc$-MIBI was obtained using Alumina N Sep-Pak cartridge. The optimum irradiation time of microwave method for 3 ml $^{99m}Tc$-labeled radiopharmaceutical solution was 10 sec for $^{99m}Tc$-ECD and $^{99m}Tc$-MIBI, and 15 sec for $^{99m}Tc-MAG_3$. The results of quality control data with Sep-Pak cartridges were well correlated with TLC method. The total preparation time of these radiopharmcaeuticals was $5{\sim}6min$ including quality control procedure. Conclusion: This study demonstrates that radiopharmaceuticals preparation by microwave heating and quality control by Sep-Pak cartridges can be efficiently utilized as an alternative to the recommended method by manufacturer's manual.

  • PDF

A Statistical Correction of Point Time Series Data of the NCAM-LAMP Medium-range Prediction System Using Support Vector Machine (서포트 벡터 머신을 이용한 NCAM-LAMP 고해상도 중기예측시스템 지점 시계열 자료의 통계적 보정)

  • Kwon, Su-Young;Lee, Seung-Jae;Kim, Man-Il
    • Korean Journal of Agricultural and Forest Meteorology
    • /
    • v.23 no.4
    • /
    • pp.415-423
    • /
    • 2021
  • Recently, an R-based point time series data validation system has been established for the statistical post processing and improvement of the National Center for AgroMeteorology-Land Atmosphere Modeling Package (NCAM-LAMP) medium-range prediction data. The time series verification system was used to compare the NCAM-LAMP with the AWS observations and GDAPS medium-range prediction model data operated by Korea Meteorological Administration. For this comparison, the model latitude and longitude data closest to the observation station were extracted and a total of nine points were selected. For each point, the characteristics of the model prediction error were obtained by comparing the daily average of the previous prediction data of air temperature, wind speed, and hourly precipitation, and then we tried to improve the next prediction data using Support Vector Machine( SVM) method. For three months from August to October 2017, the SVM method was used to calibrate the predicted time series data for each run. It was found that The SVM-based correction was promising and encouraging for wind speed and precipitation variables than for temperature variable. The correction effect was small in August but considerably increased in September and October. These results indicate that the SVM method can contribute to mitigate the gradual degradation of medium-range predictability as the model boundary data flows into the model interior.

Midwives' Perceptions of the Importance of Teaching the Lamaze Method of Childbirth Preparation, Their Practice of it and Inhibiting Factors. (조산사의 라마즈 산전교육에 대한 중요성 인식과 수행정도 및 저해요인에 관한 연구)

  • Yoon, Gui-Nam;Cho, Mi-Young
    • 모자간호학회지
    • /
    • v.2 no.1
    • /
    • pp.21-33
    • /
    • 1992
  • This study was done to investigate how importantly midwives thought of Lamaze Method of Childbirth, how satisfactorily they performed their Lamaze Method of Childbirth and what inhibited their activities from being performed if not done satisfactorily. The subjects of this study were 76midwives at midwifery in Pusan, Deagu, Kyungnam and Kyungbok. Data were collected by using questionaire from Sep. 1 to Sep.30, 1991. The measurement tools was maded by the researcher based on Kim's scale for prenatal nursing activities. The statistical analysis was done with based statistical values likes frequencies, means, standard deviations and advanced methods such as Pearson's correlation coefficient, 1-test, F-test, F-test by using SPSS package program. The results of this study can be summarized as follows ; 1. The results of Investigating perception according to importance degree and performance degree of Lamaze Method of Childbring showed that midwives were slightly below both perception according to importance(2.17) and performance(2.16) of Lamaze Method of Childbirth 2. Inhibiting factors of Lamaze Method of Childbirth were abscence of husband(3.08), lack of teaching room(2.71), and lack of books or literature of Lamaze Method (2.58). 3. There appears to be a positive relation between perception according to importance degree and performance degree of Lamaze Method of Childbirth (r=0.69, P<0.01). There appears to be a negative relation between perception according to importance degree and inhibit factors of performance (r=-0.38, P<0.01). There appears to be a negative relation between performance and inhibit factors of performance (r=-0.22. P<0.01). 4. The item of highest perception defree in prenatal education is 1st, Consultation about sexual life (2.53), End, illustration of the importance of a bath and perinal cleanliness and Avoidance of excessive respiration method and also its comfortable application during uterine contractility(2.45). The item of lowest perception degree is about pregnant symptom sign and predicted date of birth (E.D.C.). On the other hand, The item of highest performance degree is education about nurtrition during pregnacy. 2nd, Illustration of the Importance of a bath and perineal cleanness(2.45). The lowest one is leaching the pregnant woman and her family about the role of husband and her family and also teaching the couple to learn exercise and respiration method (1.84). Though importance perception degree and performance degree is low. Midwives who wert subject in this research shoves that they perform general items concerning prenatal education well. 5. In the relationship between perception according to importance degree of Lamaze Method of Childbirth and the general characteristics of subjects, the differences in mean number of visiting pregnacies for 1 month. 6. In the relationship between performance degree of Lamaze Method of Childbirth and the general characteristics of subjects, the differences in age, marriage, and mean number of visiting pregnancies for 1 month. With the above information we see the importance of midwife prenatal care education and high correlation between performance degree and perception degree. When Lamaze prenatal education is well performed the number of pregnant woman who have follow-up, check-ups increase. Therefore in this research we can validity that there is a relation between Lamaze prenatal education and patient follow-up. This research showes in a situation where if one does not maximally perform a prenatal education there is a possibility that the popular use of midwife activities may encounter obstacles so the education to save new knowledge and training for prenatal education is needed as a function of Lamaze prenatal education, when a special Lamaze education is well performed for the pregnant woman, who follows-up at amidwife clinic. With the above conclusion we can suggest : 1. Continued research which minimized obstacles to Lamaze prenatal education is needed. 2. The official method of midwives is necessary.

  • PDF

Serum Antioxidant Vitamins and Erythrocyte Lipid Peroxide Levels in Female Adolescent Smokers

  • Kim, Jung-Hee;Moon, Jeong-Suk;Lee, Hee-Won
    • Journal of Community Nutrition
    • /
    • v.1 no.1
    • /
    • pp.16-24
    • /
    • 1999
  • The purpose of this study was to investigate the association between adolescent smoking and antioxidant vitamins. Subjects were 87 non-smokers and 90 smokers. who were female high school students. Smokers were divided into tow groups by smoking status, 35 light smokers (packyear<1) and 53 heavy smokers(packyear$\geq$1). Dietary intakes were examined through questionnaires and nutrient intakes of vitamin C and A were analyzed by smoking status using Computer Aided Nutritional analysis program for professional (CAN-PRO). Serum vitamin C level was measured by 2,4-dinitrophenylhydrazine method and serum levels of vitamin A and E were measured by HPLC. Erythrocyte lipid peroxide levels was measured by thiobarbituric acid reactive substance (TBARS) method. All data were statistically analyzed by SAS PC package program. The mean vitamin C intakes of non-smokers, light smokers and heavy smokers were 58.2mg/day, 50.1 mg/day 58.1mg/day, respectively. The mean vitamin A intakes of non-smokers, light and heavy smokers were 28.1$\mu\textrm{g}$R.E./day, 278.7$\mu\textrm{g}$R.E./day and 289.6$\mu\textrm{g}$R.E./day, respectively. There was no significant difference in dietary intakes of antioxidant vitamins by smoking status. However, the serum vitamin C level, 11.40mg/l in heavy smokers was 12% lower than that of than that of 12.70mg/l in non-smokers. The serum vitamin A level was not significantly different among the groups. Vitamin E level, 8.79mg/l in heavy smokers was 8% lower than that of 9.53mg/l in non-smokers. There was no significant correlation between the dietary intakes and serum levels of vitamin A and C. The erythrocyte TBARS level, 1.90nmol/ml in light smokers was significantly lower (p<0.05) than 2.71 nmol/ml in heavy smokers or non-smokers. The correlation data showed that the cerythrocyte TBARS level had a significant positive correlation with packyear. Overall results might suggest that cigarette smokers with a longer smoking history need more dietary intakes of vitamin C and E than do non-smokers to reach the same serum level.

  • PDF

The effect of the improvement of nursing productivity in Hospital Information System;A Case study on Kwangju Patriots' and Veterans' Hospital (병원정보시스템내의 간호생산성향상효과에 관한 연구)

  • Lee, Byung-Hwa
    • Journal of Korean Academy of Nursing Administration
    • /
    • v.5 no.2
    • /
    • pp.237-251
    • /
    • 1999
  • The purpose of this study is to suggest successful strategies through which the effect of the information system of a hospital can be forecasted at the nursing department. In order to set up successful strategies, in the first place, both the methods of CSF(Critical Success Factor: Rockart, 1979) and ULD(User-Led Development) method and the method suggested by the Korea Productivity Center were applied. In order to measure the improvement of nursing productivity, the Dissonance theory was used. The data were collected from 100 employees serving at the clinic department of Kwangju Patriots' and Veterans' Hospital from July 4 to July 25, 1998 with reference to all 222 cases, for sampling work; then the part of the efficiency of the treatment or management of hospital business - simplification of the process of the treatment of hospital business and reduction of the time of the treatment of hospital business were measured; and in order to forecast organizational behavior, 100 cases of organization behavior were analysed, based on the well structured, questionnaires. In order to forecast the user's organizational behavior, a tool(Ronald. 1988; Stephen, 1982: Senn, 1992: Olsen, 1980: Anderson, 1988: Kim. 1992: Cho. 1994) to measure the extent or degree of the user's recognition or understanding whose reliability coefficient is 0.63 was used: and regarding the items expected by the users concerning the convenience of the system, a tool created by Bernadett, Szajna and Richard W. Scamell(1993) whose reliability coefficient is 0.88 was used. And finally, those data were analysed, utilizing the statistical package of SPSS/PC 6.0. successful strategies are suggested as follows: 1. In order that the Kwangju Patriots' and Veterans' Hospital's purpose can be successful through its strategic, information system, the quality of its services should be elevated. and for elevating the quality of medical services, elevation of the quality of medical expertism or specialty is an important factor in determining such quality. 2. In order to make the hospital information system to be successful, the hospital's top manager should participate in the effort making it successful with helping hands of the members or personnel of the hospital. 3. In order to make users participate in the hospital information system, it is prerequisite that all nurses in a hospital should voluntarily participate in the system 4. In order to reduce the expense, the time in coping with business per duty should be reduced by 10${\sim}$33.23%. The time of the direct nursing care which added value is relatively high should be elongated in order to elevate the quality of hospital services. 5. Since the introduction and spread of the hospital information system are influenced by the duration in the experience of computer use, the user of the hospital information system should have a plan to receive well-planned computer education. Finally it is suggested that the forecast of long-term productivity through a review of the user's expectation of the system should be inspected and tested through continuous studies of its effectiveness.

  • PDF

Crepe Search System Design using Web Crawling (웹 크롤링 이용한 크레페 검색 시스템 설계)

  • Kim, Hyo-Jong;Han, Kun-Hee;Shin, Seung-Soo
    • Journal of Digital Convergence
    • /
    • v.15 no.11
    • /
    • pp.261-269
    • /
    • 2017
  • The purpose of this paper is to provide a search system using a method of accessing the web in real time without using a database server in order to guarantee the up-to-date information in a single network, rather than using a plurality of bots connected by a wide area network Design. The method of the research is to design and analyze the system which can search the person and keyword quickly and accurately in crepe system. In the crepe server, when the user registers information, the body tag matching conversion process stores all the information as it is, since various styles are applied to each user, such as a font, a font size, and a color. The crepe server does not cause a problem of body tag matching. However, when executing the crepe retrieval system, the style and characteristics of users can not be formalized. This problem can be solved by using the html_img_parser function and the Go language html parser package. By applying queues and multiple threads to a general-purpose web crawler, rather than a web crawler design that targets a specific site, it is possible to utilize a multiplier that quickly and efficiently searches and collects various web sites in various applications.