• 반도체디스플레이기술학회지
• /
• 제5권3호
• /
• pp.5-10
• /
• 2006

This paper investigates cutting qualities after laser dicing and predicts the problems that can be generated by laser dicing. And through 3 point bending test, die strength is measured and the die strength after laser dicing is compared with the die strength after mechanical sawing. Laser dicing is chiefly considered as an alternative to overcome the defects of mechanical sawing such as chipping on the surface and crack on the back side. Laser micromachining is based on the thermal ablation and evaporation mechanism. As a result of laser dicing experiments, debris on the surface of wafer is observed. To eliminate the debris and protect the surface, an experiment is done using a water soluble coating material and ultrasonic. The consequence is that most of debris is removed. But there are some residues around the cutting line. Unlike mechanical sawing, chipping on the surface and crack on the back side is not observed. The cross section of cutting line by laser dicing is rough as compared with that by mechanical sawing. But micro crack can not be seen. Micro crack reduces die strength. To measure this, 3 point bending test is done. The die strength after laser dicing decreases to a half of the die strength after mechanical sawing. This means that die cracking during package assembly can occur.

• Steel and Composite Structures
• /
• 제50권1호
• /
• pp.77-87
• /
• 2024

In this study, the two-dimensional crack problem was investigated by using the finite element method (FEM)-based ANSYS package program and the artificial neural network (ANN)-based multilayer perceptron (MLP) method. For this purpose, a half-infinite functionally graded (FG) layer with a crack pressed through two rigid blocks was analyzed using FEM and ANN. Mass forces and friction were neglected in the solution. To control the validity of the crack problem model exercised, the acquired results were compared with a study in the literature. In addition, FEM and ANN results were checked using Root Mean Square Error (RMSE) and coefficient of determination (R²), and a well agreement was found. Numerical solutions were made considering different geometric parameters and material properties. The stress intensity factor (SIF) was examined for these values, and the results were presented. Consequently, it is concluded that the considered non-dimensional quantities have a noteworthy influence on the SIF. Also FEM and ANN can be logical alternative methods to time-consuming analytical solutions if used correctly.

• 한국도로학회논문집
• /
• 제8권1호
• /
• pp.139-152
• /
• 2006

Many experimental and numerical approaches have been developed to evaluate paving materials and to predict pavement response and distress. Micromechanical simulation modeling is a technology that can reduce the number of physical tests required in material formulation and design and that can provide more details, e.g., the internal stress and strain state, and energy evolution and dissipation in simulated specimens with realistic microstructural features. A clustered distinct element modeling (DEM) approach was implemented In the two-dimensional particle flow software package (PFC-2D) to study the complex behavior observed in asphalt mixture fracturing. The relationship between continuous and discontinuous material properties was defined based on the potential energy approach. The theoretical relationship was validated with the uniform axial compression and cantilever beam model using two-dimensional plane strain and plane stress models. A bilinear cohesive displacement-softening model was implemented as an intrinsic interface and applied for both homogeneous and heterogeneous fracture modeling in order to simulate behavior in the fracture process zone and to simulate crack propagation. A disk-shaped compact tension test (DC(T)) with heterogeneous microstructure was simulated and compared with the experimental fracture test results to study Mode I fracture. The realistic arbitrary crack propagation including crack deflection, microcracking, crack face sliding, crack branching, and crack tip blunting could be represented in the fracture models. This micromechanical modeling approach represents the early developmental stages towards a 'virtual asphalt laboratory,' where simulations of laboratory tests and eventually field response and distress predictions can be made to enhance our understanding of pavement distress mechanisms, such its thermal fracture, reflective cracking, and fatigue crack growth.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 추계학술대회
• /
• pp.1442-1447
• /
• 2003

Computer is a very powerful machine which is widely using for data processing, DB construction, peripheral device control, image processing etc. Consequently, many researches and developments have progressed for high performance processing unit, and other devices. Especially, the core units such as semiconductor parts are rapidly growing so that high-integration, high-performance, microminiat turization is possible. The packaging in the semiconductor industry is very important technique to de determine the performance of the system that the semiconductor is used. In this paper, the inspection of the inner defects such as delamination, void, crack, etc. in the semiconductor packages is studied. ESPI which is a non-contact, non-destructive, and full-field inspection method is used for the inner defect inspection and its results are compared with that of C-Scan method.

• 대한기계학회논문집A
• /
• 제31권6호
• /
• pp.659-664
• /
• 2007

$Moire\'{e}$ interferometry is a useful technique to assess the reliability of electronic package because $Moire\'{e}$ interferometry can measure the whole-field and real-time deformations. The shear strain of a small crack site is important to the reliability assessment of electronic package. The optical limitation of $Moire\'{e}$ interferometry makes ambiguous the shear strain of a small area. An atomic force microscope (AFM) is used to measure the profile of a micro site. High resolution of AFM can apply to the $Moire\'{e}$ technique. AFM $Moire\'{e}$ technique is useful to measure the shear strain of a small area. In this research, the method to accurately measure the deformation of a small area by using AFM $Moire\'{e}$ is proposed. A phase-shifting method is applied to improve the resolution of AFM $Moire\'{e}$.

• 비파괴검사학회지
• /
• 제21권6호
• /
• pp.598-606
• /
• 2001

최근 전자장치의 고기능화에 따라서 반도체 장치의 고집적화는 물론 반도체 패키지의 박형화 추세에 있다. 이러한 반도체가 장치에 실장된 후에도 안정된 성능을 발휘할 수 있는지 여부에 대한 신뢰성을 보장하기 위해 조립 완료된 반도체 패키지에 대한 preconditioning 시험을 수행하게 된다. 또한 preconditioning 시험 전후에 초음파 주사 현미경을 이용한 검사를 실시함으로써 반도체 패키지에 대한 들뜸이나 패키지 크랙과 같은 내부 결함의 존재 여부를 알아보게 된다. 본 논문에서는 반도체 내부의 결함 유무를 효과적으로 검사할 수 있는 초음파를 이용한 신뢰성 평가 방법과 절차를 제시하고, preconditioning 시험 과정에서 수행되는 시험법을 통해 패키지 내부 결함을 야기하는 가장 중요한 요인이라 할 수 있는 수분에 의한 고장 메커니즘을 분명히 함으로써 반도체 패키지에 대한 일련의 고장 분석 및 신뢰성 평가 방법을 정립하고자 하였다.

• 마이크로전자및패키징학회지
• /
• 제14권4호
• /
• pp.9-14
• /
• 2007

본 연구에서는 가속화 조건에서의 비전도성 접착제가 사용된 플립칩 패키지의 열적 신뢰성에 관하여 평가하였다. 실리콘 칩에 $17{\mu}m$두께의 Au 범프를 형성하고 무전해 Ni/Au 도금과 Cu 패드의 두께가 각각 $5{\mu}m$와 $25{\mu}m$로 형성된 연성 기판을 사용하여 플립칩 패키지를 형성하였다. 유리전이온도가 $72^{\circ}C$인 비전도성 접착제를 사용하여 플립칩을 접합시킨 후 열충격 시험과 항온항습 시험을 실시하였다. 열충격 싸이클과 항온항습 유지 시간이 증가할수록 플립칩 패키지의 전기 저항이 증가하는 것을 확인할 수 있었다. 이는 Au 범프와 Au 범프 사이의 균열, 칩과 비전도성 접착제 또는 기판과 비전도성 접착제 사이의 층간 분리에 의한 것으로 사료된다. 또한 항온항습 하에서의 전기 저항의 변화가 열충격하에서 보다 큰 것을 확인할 수 있었다. 따라서 비전도성 접착제가 사용된 플립칩 패키지는 온도보다 습기에 더욱 민감하다는 것을 알 수 있었다.

• 한국생산제조학회지
• /
• 제7권1호
• /
• pp.58-68
• /
• 1998

Advantages of adhesively bonded joints and techniques of weight reduction have led to increasing use of structural adhesives such as LSI(large scale integration) package, automobile, aircraft in the various industries. In spite of such wide applications of adhesively bonded joints, the evaluation method of bonding strength has not been established. Stress singularity occurs at the interface edges of adhesively bonded joints and it is required to analyze it. In this paper, the stress singularity using 2-dimensional elastic boundary element method (BEM) with the changes of the lap length and adhesive for single lap joint was analyzed, and experiments of strength evaluation were carried out. As the results, the evaluating method of bonding strength considering stress singularity at interface edges of adhesively bonded joints and stress intensity factor of interface crack have been proposed in static and fatigue test.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2005년도 춘계학술대회 논문집
• /
• pp.91-96
• /
• 2005

In this study, researchers developed the estimative algorithm for artificial defects in semiconductor packages and performed it by pattern recognition technology. For this purpose, the estimative algorithm was included that researchers made software with MATLAB. The software consists of some procedures including ultrasonic image acquisition, equalization filtering, Self-Organizing Map and Backpropagation Neural Network. Self-Organizing Map and Backpropagation Neural Network are belong to methods of Neural Networks. And the pattern recognition technology has applied to classify three kinds of detective patterns in semiconductor packages: Crack, Delamination and Normal. According to the results, we were confirmed that estimative algorithm was provided the recognition rates of $75.7\%$ (for Crack) and $83_4\%$ (for Delamination) and $87.2\%$ (for Normal).

• 마이크로전자및패키징학회지
• /
• 제19권2호
• /
• pp.7-15
• /
• 2012

최근 모바일 기기에 적용되는 반도체 패키지는 초소형, 초박형 및 다기능을 요구하고 있기 때문에 다양한 실리콘 칩들이 다층으로 수직 적층된 패키지의 개발이 필요하다. 패키지 및 실리콘 칩의 두께가 계속 얇아지면서 휨 현상, 크랙 및 여러 다른 형태의 파괴가 발생될 가능성이 많다. 이러한 문제는 패키지 재료들의 열팽창계수의 차 및 패키지의 구조적인 설계로 인하여 발생된다. 본 연구에서는 4층으로 적층된 FBGA 패키지의 휨 현상 및 응력을 수치해석을 통하여 상온과 리플로우 온도 조건에서 각각 분석하였다. 상온에서 가장 적은 휨을 보여준 경우가 리플로우 공정 조건에서는 오히려 가장 큰 휨을 보여 주고 있다. 본 연구의 물성 조건에서 패키지의 휨에 가장 큰 영향을 미치는 인자는 EMC의 열팽창계수, EMC의 탄성계수, 다이의 두께, PCB의 열팽창계수 순이었다. 휨을 최소화하기 위하여 패키지 재료들의 물성들을 RMS 기법으로 최적화한 결과 패키지의 휨을 약 $28{\mu}m$ 감소시킬 수 있었다. 다이의 두께가 얇아지게 되면 다이의 최대 응력은 증가한다. 특히 최상부에 위치한 다이의 끝 부분에서 응력이 급격히 증가하기 시작한다. 이러한 응력의 급격한 변화 및 응력 집중은 실리콘 다이의 파괴를 유발시킬 가능성이 많다. 따라서 다이의 두께가 얇아질수록 적절한 재료의 선택 및 구조 설계가 중요함을 알 수 있다.