• Korean Journal of Soil Science and Fertilizer
• /
• v.24 no.3
• /
• pp.183-191
• /
• 1991

A study was conducted to determine the influence of soil chemical properties on the distribution and forms of cadmium (Cd), lead (Pb), copper(Cu) and Zinc(Zn) in paddy soils near zinc mines. A sequential extraction procedure was used to fractionate the heavy metals in soils into the designated from of water soluble, exchangeable, organically bound, oxide/carbonate, and sulfide/residual. The predominant form of Cd, Pb, Cu and Zn in the soils was found to be sulfide/residual form. Oxide/carbonate Cd and Pb and organically bound Cu were high, while exchangeable Pb and Cu were very low. Water soluble Cd, Pb and Cu were not detected in the soils. The percentages of the heavy metals content in exchangeable fractions were inversely correlated with those in sulfide/residual fractions in the soils. Exchangeable Cd and Zn and the oxide/carbonate Pb were shifting to the sulfide/residual form with soil depth and the chemical forms of Cu were not changed. Organically bound Cu was positively correlated with soil organic matter content but Cd, Pb and Zn were not. The percentages of Cd, Pb and Zn content in exchangeable forms decreased with soil pH, while those in oxide/carbonate and sulfide/residual forms increased with soil pH. The amounts of oxide/carbonate and sulfide/residual forms of pb were higher than those of Cd and Zn at same soil pH.

• The Journal of the Korean life insurance medical association
• /
• v.2 no.1
• /
• pp.195-217
• /
• 1985

A statistical analysis on the ratio of weight-for-height in insurance medicine was carried out in a total of 12,690 insured persons who were medically examined at the Honam medical department, Dong Bang life insurance company, ltd. from June, 1979 to February, 1984. The results were as follows: 1. The mean value of the ratio of weight-for-height(W/H ratio) was $102.3{\pm}11.3%$ in all males, and $105.2{\pm}103.6%$ in all females. The difference of the values between males and females showed statistical significance(P<0.001). The mean value of W/H ratio in all the insureds was $103.8{\pm}12.9%$. In each age group, the mean value of female was higher than that of male without exception(P<0.001). The mean value of both sexes in each age group showed gradual increase with age except for the age group over 50(P<0.001). 2. The incidences of the average weighted, overweighted and underweighted lives were respectively 91.6% in all males, 84.2% in all females(P<0.001); 7.9% in all males, 15.4% in all females(P<0.001); 0.5% in all males, 0.4% in all females(P>0.05). The incidences of average weighted, overweighted and underweighted lives in all the insureds were respectively 87.6%, 12.0% and 0.5%. The incidence of the average weighted lives in male in each age group was always higher than that in female with the exception of the age group below 19(P<0.001), whereas the incidence of the overweighted lives in male in each age group was always lower than that in female(P<0.05 in the age group below 19, P<0.001 in the other age groups). The incidence of average weighted lives of both sexes in each age group showed gradual decrease with age from the second to fifth decade(P<0.001), whereas the incidence of the overweighted lives of both sexes in each age group showed gradual increase with age from the second to fifth decade(P<0.001). 3. The relative frequency distribution polygons of W/H ratio of both sexes drawn in a pair on one coordinate plane revealed lying in juxtaposition each other horizontally and showed the shifting of female's polygon to male's one toward the direction of greater value of W/H ratio at a short distance which increased gradually with age. 4. Correlations between both sexes and among age groups relating to W/H ratios of the insureds seem to be a physiological phenomenon of body build and should be considered on the rating of the build. Author prepared a rating table of build based on the correlations above menthioned. Some gradients by sex and age in the rating table of build are organized; in female group, the ratings of 0, 30-50, 50-100 and 100-D are to calculate by the build with W/H ratio of 80-125%, $126{\sim}145%,\;146{\sim}165%$ and over 166% respectively in the age group of 29 or under, by the build with W/H ratio of $80{\sim}130%,\;131{\sim}150%,\;151{\sim}170%$ and over 171% respectively in the age group of $30{\sim}59$, and by the build with W/H ratio of $80{\sim}135%,\;136{\sim}155%,\;156{\sim}175%$ and over 176% respectively in the age group of 60 or over. In male group, the ratings of 0, $30{\sim}50$, 50-100, and 100-D are to calculate by the build with W/H ratio of $80{\sim}120%,\;121{\sim}140%,\;141{\sim}160%$ and over 161% respectively in all ages. Of under weighted lives, in both sexes, the ratings of 30-50 and 50-D are to calculate by the build with W/H ratio of $76{\sim}79%$ and under 75% respectively. The results of the ratings according to a rating table by author were as follows: The incidence of the ratings of 0, 30-50, 50-100 and 100-D showed no difference between male and female. The incidence of the ratings of 0(indicating the average weighted lives) showed gradual decrease with age and the incidence of the ratings of 30-50 and 50-100(indicating the overweighted lives) showed gradual increase with age. These results are thought to be considerably reasonable because the incidence of the builds in each age group is supposed to have no difference by sex and the incidence of the overweighted lives would increase with age.

• Asian-Australasian Journal of Animal Sciences
• /
• v.12 no.3
• /
• pp.358-365
• /
• 1999

The effects of dry roasting whole lupin seeds (lupinus albus, WLS) at 110, 130 or $150{^{\circ}C}$ for 15, 30 or 45 minutes on the in sacco rumen degradation characteristics, optimal heating conditions of time and temperature and in vitro enzyme digestibility were determined. Ruminant degradation characteristics (RDC) of crude protein (CP) of WLS were determined by in sacco technique in dairy cows. Measure ROC were soluble (S), undegradable (U), potentially degradable (D) fractions, lag time (TO) and rate of degradation (Kd) of insoluble but degradable fraction. Based on measured ROC, percentage bypass CP (%BCP) and bypass CP (BCP in g/kg, DM) were calculated. Degradability of CP was significantly reduced by dry roasting (p<0.001). The interaction of dry roasting temperature and time had significant effects on D (p<0.05), Kd (p<0.01), U (p<0.01), %BCP (p<0.001) and BCP (p<0.001) but not on S (p=0.923>0.05). With increasing time and temperature, S, D, Kd and U varied from 31.8%, 67.4%, 10.3%/h and 0.8% in the raw WLS (RWLS) to 27.1 %, 35.8%, 3.6%/h, 38.4% in $150{^{\circ}C}/45\;min$, respectively. All these effects resulted in increasing %BCP from 25.9 in RWLS to 61.0% in the $150{^{\circ}C}/45\;min$. Therefore BCP increased form 111.2 to 261.2 g/kg DM, respectively. Both %BCP and BCP at $150{^{\circ}C}/45\;min$ increased nearly 2.5 times over the RWLS. The effects of dry roasting on %BCP and BCP seemed to be linear up to the highest value tested. Although ROC had been altered by dry roasting, the In vitro perpsin-cellulase digestibility was generally unchanged. It was concluded that dry roasting was effective in shifting CP degradation from rumen to the lower gastrointestinal tract to potential reduce unnecessary N loss in the rumen. It might be of great value in successfully synchronizing the rhythms of release of nitrogen and energy in the rumen, thus achieving a more efficient fermentation of diets with high proportions of lignocellulosic resources. To determine the optimal dry roasting conditions, the digestibility of each treatment in the cows will be measured in the next trial using mobile bags technique.

• Journal of Microbiology and Biotechnology
• /
• v.16 no.12
• /
• pp.1849-1855
• /
• 2006

It has been shown that the initial conditions of bacterial cultivation are extremely important for the successful production of hyaluronic acid (HA) by fermentation. We investigated several parameters that affect cell growth rate and the productivity and molecular weight of hyaluronic acid--i.e., agitation speed, aeration rate, culture temperature, pH, and pressure--to determine how to optimize the production of HA by Streptococcus zooepidemicus on an industrial scale. Using a 30-1 jar fermentor under laboratory conditions, we achieved maximum HA productivity and biomass when the agitation speed and aeration rate were increased simultaneously. By shifting the temperature downward from 35$^{\circ}C$ to 32$^{\circ}C$ at key levels of cell growth during the fermentation process, we were able to obtain HA with a molecular weight of $2.8{\times}10^6$ at a productivity of 5.3 g/l. Moreover, we reproduced these optimized conditions successfully in three 30-1 jar fermentors. By reproducing these conditions in a 3-$m^3$ fermentor, we were able to produce HA with a molecular weight of $2.9{\times}10^6$ at a productivity of 5.4 g/l under large-scale conditions.

• Advances in environmental research
• /
• v.3 no.1
• /
• pp.11-28
• /
• 2014

Advanced oxidation processes using UV and catalysts like $TiO_2$ and ZnO have been recently applied for the photocatalytic degradation of MTBE in water. Attempts have been made to replace the UV radiation by the solar spectrum. This review intends to shed more light on the work that has been done so far in this area of research. The information provided will help in crystallizing the ideas required to shift the trend from UV photocatalysis to sunlight photocatalysis. The careful optimization of the reaction parameters and the type of the dopant employed are greatly responsible for any enhancement in the degradation process. The advantage of shifting from UV photocatalysts to visible light photocatalysts can be observed when catalysts like $TiO_2$ and ZnO are doped with suitable metals. Therefore, it is expected that in the near future, the visible light photocatalysis will be the main technique applied for the remediation of water contaminated with MTBE.

• Korean Journal of Environmental Agriculture
• /
• v.26 no.2
• /
• pp.131-140
• /
• 2007

Phospho-gypsum a primary waste by-product in phosphate fertilizer manufacturing industry and a potential source of electron acceptors, such as mainly of sulfate and a trace amount of iron and manganese oxides, was selected as soil amendment for reducing methane $(CH_4)$ emissions during rice cultivation. The selected amendment was added into potted soils at the rate of 0, 2, 10, and 20 Mg $ha^{-1}$ before rice transplanting. $CH_4$ flux from the potted soil with rice plant was measured along with soil Eh and floodwater pH during the rice cultivation period. $CH_4$ emission rates measured by closed chamber method decreased with increasing levels of phospho-gypsum application, but rice yield markedly increased up to 10 Mg $ha^{-1}$ of the amendment. At this amendment level, total $CH_4$ emissions were reduced by 24% along with 15% rice grain yield increment over the control. The decrease in total $CH_4$ emission may be attributed due to shifting of electron flow from methanogenesis to sulfate reduction under anaerobic soil conditions.

• Smart Structures and Systems
• /
• v.2 no.3
• /
• pp.225-235
• /
• 2006

With the discovery in plants of the proteinaceous forisome crystalloid (Knoblauch, et al. 2003), a novel, non-living, ATP-independent biological material became available to the designer of smart materials for advanced actuating and sensing. The in vitro studies of Knoblauch, et al. show that forisomes (2-4 micron wide and 10-40 micron long) can be repeatedly stimulated to contract and expand anisotropically by shifting either the ambient pH or the ambient calcium ion concentration. Because of their unique abilities to develop and reverse strains greater than 20% in time periods less than one second, forisomes have the potential to outperform current smart materials as advanced, biomimetic, multi-functional, smart sensors or actuators. Probing forisome material properties is an immediate need to lay the foundation for synthesizing forisomebased smart materials for health monitoring of structural integrity in civil infrastructure and for aerospace hardware. Microfluidics is a growing, vibrant technology with increasingly diverse applications. Here, we use microfluidics to study the surface interaction between forisome and substrate and the conformational dynamics of forisomes within a confined geometry to lay the foundation for forisome-based smart materials synthesis in controlled and repeatable environment.

• Asian-Australasian Journal of Animal Sciences
• /
• v.12 no.4
• /
• pp.537-543
• /
• 1999

Whole horse beans (Vicia faba cv. Alfred) (WHB) were pressure toasted at different temperatures of 100, 118 and $136^{\circ}C$ for 3, 7, 15 and 30 minutes in order to determine an optimal heating conditions to increase bypass starch (BPSt) as glucose source which is usually limiting nutrient in highly producing dairy cows in the Netherlands. Starch (St) Ruminal Degradative Kinetics and Fermentation Characteristics of (SRDC) of WHB were determined using in sacco technique in 4 lactating dairy cows fed 47% hay and 53% concentrate according to Dutch dairy cow requirements. Measured characteristics of St were soluble fraction (S), potentially degradable fraction (D) and rate of degradation (Kd) of insoluble but degradable fraction. Based on measured characteristics, percentage bypass starch (BPSt) was calculated according to the Dutch new feed evaluation system: the DVE/OEB system. Pressure toasting temperatures significantly affected starch gelatinization (p<0.01). Degradability of Starch in the rumen was highly reduced by pressure toasting (p<0.01). S varied from 58.2% in the raw WHB (RWHB as a control) to 19.6% in $136^{\circ}C/15min$. S was reduced rapidly with increasing time and temperature (p<0.01). D varied from 41.8% in RWHB to 80.5% in $136^{\circ}C/15min$. D fraction was enormously increased with increasing time and temperature (p<0.01). Kd varied from 4.9%h in RWHB to 3.4%/h in $136^{\circ}C/15min$. All these effects resulted in increasing %BPSt from 29.0% in RWHB to 53.1% in $136^{\circ}C/15min$. Therefore BPSt increased from 93.5 g/kg in RWHB to 173.5 g/kg in $136^{\circ}C/15min$. The effects of pressure toasting on %BPSt and BPSt seemed to be linear up to the highest values tested. Therefore no optimal pressure toasting conditions could be determined at this stage. But among 10 treatments, The treatment of $136^{\circ}C/15min$was the best with the highest BPSt content. It was concluded that pressure toasting was effective in shifting starch degradation from rumen to small intestine to increase bypass starch.

• Korean Journal of Microbiology
• /
• v.36 no.2
• /
• pp.91-96
• /
• 2000

The cultural and physiological conditions for the T-2 toxin [4,15-diacetoxy-8-(3-mety1butyloxy)-12,13- epoxy-trichothec-9-en-3-01, $C_{24}H_{30}O_9$] production by Fusarium spp. were studied. Thin layer chromatography (TLC) assay and the microbiological assay uslng Rhodotomla rubra were used to quantitate tbe T- 2 toxin. Among the four strains of Fusarium spp., F tn'cinctum NRRL 3299 was best for T-2 toxin production. In solid culture, white com grit medium was best for T-2 toxm production. Temperature played a critical role in the production of T-2 toxin. T-2 toxin production was favored by long duration of low-temperature incubation. The growth and toxin production were relatively high on galactose, fructose, glucose, and sucrose media, when each was used as a sole carbon source, and relatively low on sorbitol, glycerol, and lactose media. For nitrogen sources, $NH_4^(+) and NO_3^{-}were used well as a sole nitrogen source, but $NO_2^-$ was not used. Initial pH and speed of shaker also affected the production of T-2 toxin. From temperature shifting experiment, it is clear that T-2 toxin metabolic pathway is regulated by temperature-dependent enzyme depression or enzyme induction system.

• Korean Journal of Microbiology
• /
• v.51 no.4
• /
• pp.319-328
• /
• 2015

The $sdu1^+$ gene encodes Sdu1, a PPPDE superfamily member of deubiquitinating enzymes (DUBs) in Schizosaccharomyces pombe. Sdu1 was previously shown to contain an actual ubiquitin C-terminal hydrolase (UCH) activity using the recombinant plasmid pYSTP which harbors the $sdu1^+$ gene. This work was designed to assess a thermotolerant role of Sdu1 against high incubation temperatures. In the temperature-shift experiments, the S. pombe cells harboring pYSTP grew much better after the shifts to $37^{\circ}C$ and $42^{\circ}C$, when compared with the vector control cells. After being shifted to $37^{\circ}C$ and $42^{\circ}C$ for 6 h, the S. pombe cells harboring pYSTP contained lower reactive oxygen species (ROS) levels, compared with the vector control cells. The nitric oxide (NO) levels of the S. pombe cells harboring pYSTP were slightly lower than those of the vector control cells in the absence or presence of the temperature shifting. The total glutathione (GSH) levels of the S. pombe cells harboring pYSTP were significantly higher than those of the vector control cells. Total superoxide dismutase (SOD) and GSH peroxidase activities were also higher in the S. pombe cells harboring pYSTP after the temperature shifts than in the vector control cells. In brief, the S. pombe Sdu1 plays a thermotolerant role against high incubation temperature through the down-regulation of ROS and NO and the up-regulation of total GSH content, total SOD and GSH peroxidase activities.