• Journal of the Korean Society of Industry Convergence
• /
• v.25 no.6_2
• /
• pp.1037-1045
• /
• 2022

In this study, nanoscale Al₂O3 ceramic particles were used due its exceptionally high hardness characteristics, chemical stability, and wear resistance properties. These nanoparticles will be used to investigate the optimal process conditions for the electro co-deposition of the Ni-Al₂O₃ composite coatings. A Watts bath electrolytic solution of a controlled composition along with a fixed agitation speed was used for this study. Whereas the current density, the pH value, temperature and concentration of the nano Al₂O₃ particles of the electrolyte were designated as the manipulative variables. The experimental design method was based on the orthogonal array to find the optimum processing parameters for the electro co-deposition of Ni-Al₂O₃ composite coatings. The result of confirmation experimental based on the optimal processing condition through the analysis of variance ; EDX analysis found that the ratio of alumina increased to 8.65 wt.% and subsequently the overall hardness increased to 983 Hv. Specially, alumina were evenly distributed on Nickel matrix and particles were embedded more firmly and finely in Nickel matrix.

• Mass Spectrometry Letters
• /
• v.13 no.4
• /
• pp.158-165
• /
• 2022

Many therapeutic class drugs such as beta-blocker, corticosteroids, NSAIDs, etc are prohibited substances in the horse racing industry. Liquid chromatography-tandem mass spectrometry (LC-MS/MS) technology makes it possible to isolate drugs from interference, enables various drug analyses in complex biological samples due to its sensitive sensitivity, and has been successfully applied to doping control. In this paper, we describe a rapid and sensitive method based on solid-phase extraction (SPE) using solid phase cartridge and LC-MS/MS to screen for different class's 35 drug targets in equine plasma. Plasma samples were pretreated by SPE with the NEXUS cartridge consisted non-polar carbon resin and minimum buffer solvent. Chromatographic separation of the analytes was performed on ACQUITY HSS C18 column (2.1 × 150 mm, 1.8 ㎛). The elution gradient was conducted with 5 mM ammonium formate (pH 3.0) in distilled water and 0.1% formic acid in acetonitrile at a flow rate of 0.25 mL/min. The selected reaction monitoring (SRM) mode was used for drug screening with multiple transitions in the positive ionization mode. The specificity, limit of detection, recovery, and stability was evaluated for validation. The method was found to be sensitive and reproducible for drug screening. The method was applied to plasma sample analysis for the proficiency test from the Association of Racing Chemist.

• Nuclear Engineering and Technology
• /
• v.55 no.4
• /
• pp.1468-1475
• /
• 2023

Enhancement of wear resistance of components used in fast reactors is necessary for long service life of the components. Plasma nitriding is a promising surface modification technology to impart high hardness and improved wear resistance of various steel components. This study discusses the characterization of chrome nitrided SS316L casing ring used in secondary sodium pump of fast breeder reactor and its stability under long term sodium exposure. Microstructural and hardness analysis showed that stress relieved component could be chrome nitrided successfully to a thickness of about 100 ㎛. Assessment of in-sodium performance of the chrome nitrided casing ring subjected to long term exposure up to 5000h at 550℃, showed retention of chrome nitrided layer with a case depth almost similar to that before sodium exposure. A slight decrease in the hardness was observed due to prolonged high temperature sodium exposure. Tribological studies indicate very low coefficient of friction indicating the retention of good wear resistance of the coating even after long term sodium exposure.

• Food Science of Animal Resources
• /
• v.37 no.2
• /
• pp.219-227
• /
• 2017

The objective of this study was to determine the physicochemical and sensory properties of cooked emulsion sausages containing different levels of lotus rhizome powder (0, 1, 2, and 3%, based on total weight). Lotus rhizome powder had no significant (p>0.05) impact on pH, moisture, protein, or ash content of sausage. However, fat content was slightly but significantly (p<0.05) decreased when the level of lotus rhizome powder was increased in the sausages. The addition of lotus rhizome powder to sausages at over 1% resulted in significantly (p<0.05) darker and less red color of cooked sausage compared to control. Increase in lotus rhizome level slightly improved the emulsion stability and apparent viscosity. Significant (p<0.05) reduction in cooking loss was observed when more than 1% of lotus rhizome powder was added to sausages. The textural properties of sausages were unaffected by the inclusion of lotus rhizome except for springiness and chewiness. On the manufacture day, control sausage had significantly (p<0.05) higher TBARS value than treatments. Regarding sensory characteristics, increased levels of lotus rhizome powder decreased (p<0.05) color and juiciness scores. However, cooked sausages exhibited similar overall acceptability regardless of the level of lotus rhizome powder added to sausages. Therefore, lotus rhizome powder, an antioxidant dietary fiber, could be used as an effective natural ingredient in meat products for the development of healthier and functional food.

• Korean Journal of Poultry Science
• /
• v.38 no.2
• /
• pp.129-136
• /
• 2011

The objective of this study was to evaluate the effects of different levels of ${\alpha}$-tocopherol and selenium in broiler diets on performance and physicochemical properties of chicken thigh meat. A total of 360 broiler chicks divided into six groups were fed a basal diet (control) or basal diet supplemented with 50 IU ${\alpha}$-tocopherol/kg (T1), 100 IU ${\alpha}$-tocopherol/kg (T2), 200IU ${\alpha}$-tocopherol/kg (T3), 0.3 ppm selenium/kg (T4), and 100 IU ${\alpha}$-tocopherol/kg + 0.3 ppm selenium/kg (T5) for five weeks. Growth performance and proximate composition of chicken thigh meat were not influenced by all dietary treatments, except for crude fat, which was significantly lower in the treatment with ${\alpha}$-tocopherol or selenium, or both compared to control. The dietary ${\alpha}$-tocopherol and selenium supplementation had no significant effects on pH, CIE $L^*$ (lightness), and $b^*$ (yellowness) values but TBARS (thiobarbituric acid reactive substance) values were decreased (P<0.05) by the addition of ${\alpha}$-tocopherol and selenium. CIE $a^*$ (redness) values increased significantly with added ${\alpha}$-tocopherol and selenium relative to the control (P<0.05). Likewise, changes in fatty acid composition in chicken thigh meat with the dietary supplementations with ${\alpha}$-tocopherol, selenium and their combination significantly increased (P<0.05) unsaturated fatty acid, whereas saturated fatty acid were decreased. It was concluded that the addition of 200 IU ${\alpha}$-tocopherol (T3) and 100 IU of ${\alpha}$-tocopherol plus 0.3 ppm selenium (T5) were most effectiveness in the improvements in the lipid oxidative stability of chicken meat when compared to the control.

• Journal of Mushroom
• /
• v.12 no.3
• /
• pp.201-208
• /
• 2014

The separation of the bacteria inhibiting Trichoderma sp. mold, the strain causing blue mold disease that occurs frequently when cultivating mushroom while carrying out the efficient fermentation of mushroom medium, from the growth was done. In about 200 strains isolated primarily from fungus garden samples, 6 strains were secondly isolated, which had fast growth rates and a clear zone on the plate medium of SM, AM, and CM. Among the 6 strains isolated, the C-1 strain showed high enzymatic activity of cellulase, amylase, and protease, and strong antibacterial activity for the T. virens and T. harzianum, selected finally. The selected C-1 strain was identified as Paenibacillus polymyxaby the result of the identification by Bergey's Manual of Systematic Bacteriology and the analysis of the nucleotide sequence of 16S rRNA, and named as P. polymyxa CK-1. In reviewing the growth conditions of the P. polymyxa CK-1 strain, the optimum cultivation temperature was $45^{\circ}C$, and the optimum pH for growth was in the range of 6.0~7.0. Appropriate incubation time of P. polymyxa CK-1 for the growth inhibition of the fungus T. virens and T. harzianum was 22 to 36 hours. And the fungal growth was not observed, even when leaving two molds inoculated on each petri dishes, which were treated with 24 hour culture solution of P. polymyxa CK-1 strain for 10 days. As a result of studying the thermal stability of the antagonists produced by the P. polymyxa CK-1 strain, no mycelial growth of the two fungi was observed in the test group treated for 20 minutes at $60^{\circ}C$ and $100^{\circ}C$, but mycelial growth was slightly observed in the test group treated for 20 minutes at $121^{\circ}C$. As aresult of reviewing the impact of the P. polymyxa CK-1 culture medium on mushroom mycelial growth, it showed no effect on a variety of mushroom mycelial growth including enoki mushroom and shiitake mushroom.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.42 no.4
• /
• pp.229-236
• /
• 2022

This study was conducted to evaluate the efficacy of adding the microbial inoculants to silage for reducing mycotoxins in rice straw silage. When a single agent of L. plantarum and a mixed agent of L. plantarum and S. cerevisiae were added in rice straw silage contaminated mycotoxins, it had an effect on silage fermentation and fiber degradation as well as mycotoxin reduction. Among the mycotoxins, only ochratoxin A and zearalenone were found in the test sample. Ochratoxin A and zearalenone showed a decreasing trend with the addition of silage inoculants compared to the control groups (38.11±2.22 and 633.67±50.30 ㎍/kg), and there was a significant difference at the mixed agents; 27.78±2.28 and 392.72±25.04 ㎍/kg, respectively (p<0.05). The pH was lower in the single agent and the mixed agent compared to the control (p<0.05). The concentration of lactic acid was higher in the single agent (11.73±0.31 mM) than in the control group (8.18±0.93 mM), and the highest concentration was 16.01±0.88 mM in the mixed agent (p<0.05). Acetic acid and propionic acid were found to be significantly lowered with the addition of silage inoculants (p<0.05). Total VFA was also lower at the addition of silage inoculants than the control group (p<0.05). The rumen in situ dry matter degradation of NDF and ADF was maintained at the highest levels of the mixed agent during the culture period, followed by the single agent and the control group at the lowest level. NDF and ADF degradation showed a significant difference at all time points after 12 and 24 hours of culture, respectively (p<0.05). The study results showed that the silage inoculants had the positive effects on quality increasing of rice straw silage; fermentative charateristics, fiber degradation and mycotoxins reduction. Ochratoxin A and zearalenone were greater reduction by adding bacterial inoculants of silage. Therefore it is considered that L. plantarum and S. cerevisiae will improve the quality and stability with remediation of mycotoxin in silage.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.35 no.1
• /
• pp.1-10
• /
• 2019

Purpose: The aim of this study was to evaluate the influence of polishing methods on the color stability of composite resins. Materials and Methods: Two bulk-fill and four conventional resin composites were filled in cylindrical molds (6 mm diameter, 4 mm height) and light-cured. The specimens were stored in $34^{\circ}C$ distilled water for 24 h. Spectrophotometer was used to determine the color value according to the CIE $L^*a^*b^*$ color space. Each group was divided into three groups according to polishing methods (n = 5). Group 1 was control group (Mylar strip group), group 2 was polished with PoGo, and group 3 was polished with Sof-Lex Spiral wheels. Color evaluation was performed weekly for 4 weeks after immersion in $34^{\circ}C$ distilled water. The results were analyzed by generalized least squares method (P < 0.05). Results: Generalized least squares analysis revealed that Sof-Lex Spiral wheels group showed the significantly lower ${\Delta}E$ values compared to PoGo and control group (P < 0.05). The ${\Delta}E$ values of polished group showed the significantly lower than the ${\Delta}E$ values of unpolished group (P < 0.05). Regarding color changes of composite resins, there was no significant difference between the ${\Delta}E$ values of Filtek Z250 and Filtek Z350 XT Universal restorative in all time intervals (P < 0.05). Tetric N-Ceram Bulk Fill showed the significantly lower ${\Delta}E$ values compared to other composite resins in 1, 2, 3 weeks (P < 0.05). Conclusion: Within the limitations of this study, polishing methods influence the color stabilities of composite resins. The group polished with Sof-Lex Spiral Wheels showed more resistance to discoloration than group polished with PoGo.

• Journal of Sensor Science and Technology
• /
• v.29 no.2
• /
• pp.93-99
• /
• 2020

A colorimetric paper sensor was used to detect volatile nitrogen-containing compounds emitted from spoiled salmon filets to determine their freshness. The sensing mechanism was based on acid-base reactions between acidic pH-indicating dyes and basic volatile ammonia and amines. A sensing layer was simply fabricated by drop-casting a dye solution of bromocresol green (BCG) on a polyvinylidene fluoride substrate, and its color-change response was enhanced by optimizing the amounts of additive chemicals, such as polyethylene glycol, p-toluene sulfonic acid, and graphene oxide in the dye solution. To avoid the adverse effects of water vapor, both faces of the sensing layer were enclosed by using a polyethylene terephthalate film and a gas-permeable microporous polytetrafluoroethylene sheet, respectively. When exposed to basic gas analytes, the paper-like sensor distinctly exhibited a color change from initially yellow, then to green, and finally to blue due to the deprotonation of BCG via the Brønsted acid-base reaction. The use of ammonia analyte as a test gas confirmed that the sensing performance of the optimized sensor was reversible and excellent (detection time of < 15 min, sensitive naked-eye detection at 0.25 ppm, good selectivity to common volatile organic gases, and good stability against thermal stress). Finally, the coloration intensity of the sensor was quantified as a function of the storage time of the salmon filet at 28℃ to evaluate its usefulness in monitoring of the food freshness with the measurement of the total viable count (TVC) of microorganisms in the food. The TVC value increased from 3.2 × 10⁵ to 3.1 × 10⁹ cfu/g in 28 h and then became stable, whereas the sensor response abruptly changed in the first 8 h and slightly increased thereafter. This result suggests that the colorimetric response could be used as an indicator for evaluating the degree of decay of salmon induced by microorganisms.

• Journal of Animal Science and Technology
• /
• v.48 no.2
• /
• pp.307-314
• /
• 2006

To search direct fed microbials, we isolated a Candida sp. from kefir grain. The isolated Candida sp. strain showed 99.8% of identity to the species of Candida kefyr by API 20C kit. Enzyme activity of Candida kefyr was higher in amylase (0.33±1.12μmol/min/mg) than that in phytase (0.052±0.98μmol/ min/mg) cellulase(0.051±μmol/min/mg) and xylanase (0.011±0.98mol/min/mg). The maximum numbers of Candida kefyr in growth curve were reached at 30 h fermentation. Candida kefyr showed high resistances to acidic environment, which was not perfectly extincted even at pH 2.0. And it showed high tolerance to bile salt which had almost 97.2% of survival in the presence of 1.0% bile salt.Especially, Candida kefyr showed high heat stability which remained 10% of initial microorganisms at 60℃. Candida kefyr was not generally inhibited by most of 11 antibiotic agent which contained tetracycline groups. These results suggest that the isolated Candida kefyr has a useful properties as probiotics.