• Journal of Forest and Environmental Science
• /
• 제36권3호
• /
• pp.219-224
• /
• 2020

Urea formaldehyde resins are widely used in the manufacturing of wood composite and their usage is always combined with release of formaldehyde characterized to be hazardous to health during and after the manufacturing of the products. This study investigates the effectiveness of wood-based adhesive from oil of pyrolysed Triplochiton scleroxylon sawdust for the production of composite board. The wood-derived Pyrolytic Oil (PyO) was blended with Urea Formaldehyde (UF) resin to formed Pyrolytic Oil-Urea Formaldehyde (PyOUF). The obtained PyOUF called Wood-Based Adhesives at four blends and control (UF) viz; 1:1, 1:2, 1:3, 2:1, 1:3 were further employed to prepare the composite board and test for their bonding strength by physical (water absorption-WA and thickness swelling-Th.S) and mechanical properties (modulus of elasticity-MOE, modulus of rupture-MOR, and impact bending-IB). Data obtained was analysed using analysis of variance at α 0.05. The result of analysis of variance conducted on physical properties show significant difference (p≤0.05) between the WA values obtained when testing the different blending proportion of PyOUF and likewise between 2 and 24 h of immersion. PyOUF had significant effect (p≤0.05) on Th. S for 24 h but no significant different (p>0.05) for the 2 h period of soaking. The analysis of variance on mechanical properties of the composite board (MOE, MOR, and IB) show significance differences (p≤0.05) between the strength values obtained when testing the different ratios of PyO with UF. PyO content influenced the properties of the boards and it is evident that PyO can be used in the manufacture of composite board.

• 한국염색가공학회지
• /
• 제4권3호
• /
• pp.116-121
• /
• 1992

This paper is on for a material to replace the petroleum-based resins used as adhesives for the fiber in rubber composite materials. The study limited to the reaction properties of tannin with formaldehyde. Tannin-formaldehyde(TF) reactions were carried out in aqueous media. Rates of reaction were strongly dependent on concentration, temperature, pH, and the mole ratio of tannin to formaldehyde. Viscosities of reaction mixtures were followed up to gelation. The reactivity of tannin-formaldehyde resins was greater than that of resorcinol-formaldehyde resins. To formulate an adhesive, a styrene-butadiene-vinyl pyridine terpolymer latex(L) was added to the TF. This preliminary results suggest that the condensed tannins have considerable promise as substitutes for resorcinol used in resin formulation for bonding of fiber to rubber.

• 대한치과교정학회지
• /
• 제48권3호
• /
• pp.163-171
• /
• 2018

Objective: The aim of this study was to evaluate the mechanical and biological properties of orthodontic bonding agents containing silver- or zinc-doped bioactive glass (BAG) and determine the antibacterial and remineralization effects of these agents. Methods: BAG was synthesized using the alkali-mediated solgel method. Orthodontic bonding agents containing BAG were prepared by mixing BAG with flowable resin. $Transbond^{TM}$ XT (TXT) and $Charmfil^{TM}$ Flow (CF) were used as controls. Ion release, cytotoxicity, antibacterial properties, the shear bond strength, and the adhesive remnant index were evaluated. To assess the remineralization properties of BAG, micro-computed tomography was performed after pH cycling. Results: The BAG-containing bonding agents showed no noticeable cytotoxicity and suppressed bacterial growth. When these bonding agents were used, demineralization after pH cycling began approximately 200 to $300{\mu}m$ away from the bracket. On the other hand, when CF and TXT were used, all surfaces that were not covered by the adhesive were demineralized after pH cycling. Conclusions: Our findings suggest that orthodontic bonding agents containing silver- or zinc-doped BAG have stronger antibacterial and remineralization effects compared with conventional orthodontic adhesives; thus, they are suitable for use in orthodontic practice.

• Journal of the Korean Wood Science and Technology
• /
• 제48권2호
• /
• pp.136-153
• /
• 2020

In this paper, the influence of initial formaldehyde/urea (F/U) molar ratios on the performance of low molar ratio (1.0) urea-formaldehyde (UF) resin adhesives has been investigated. Two initial F/U molar ratios, i.e., the first and second initial molar ratios were used for the alkaline addition reaction. Three levels of the first initial F/U molar ratios (2.0, 3.0, and 4.0) and two levels of the second initial molar ratios (2.0 and 1.7) were employed to prepare a total of six UF resins with an identical final molar ratio (1.0). The basis properties, functional groups, molecular weight, crystallinity, and thermal curing properties of the UF resins were characterized in detail. Higher levels (3.0 and 4.0) of the first initial F/U molar ratio provided the UF resins with better properties (non-volatile solids content, viscosity, gelation time, pH, and specific gravity) than those of the resins prepared with the conventional level F/U molar ratio of 2.0. Statistical analysis suggested that combining the first and second initial molar ratio of 4.0 with 1.7 would result in UF resins with greater adhesion strength and lower formaldehyde emission than those of the resins prepared with other molar ratios. The results showed that higher levels of the first initial molar ratio resulted in a more branched structure, as indicated by GPC, FTIR, DSC, XRD, and greater adhesion strength than those of the other UF resins with an identical final molar ratio of 1.0.

• 한국대기환경학회지
• /
• 제21권2호
• /
• pp.191-204
• /
• 2005

Building and furnishing materials and consumer product are important sources of volatile organic compounds(VOCs) and other aldehydes in the indoor environment. Some available evidence indicates that VOCs can cause adverse health effects to the building occupants and contribute to some of the symptoms of what we call, 'Sick House Syndrome' in Korea. The aims of this study were to evaluate the efficiency of emission system and to investigate comparison of the emission characteristics of different building materials such as wall-papers, paints, and adhesives. The emission of VOCs from building materials were determined in the small chambers defining the temperature, relative humidity, and ventilation rate in this study. VOCs were sampled for 20 minutes using Tenax-TA tubes and analysed by GC-MS with thermal desorption. The stability of conditions for temperature and relative humidity in this small chamber system showed that the fluctuation of temperature was between 25.4$\pm$0.3$^{\circ}C$ and that of relative humidity was 50.2$\pm$0.6$\%$ under the airflow rate of 167 mL/min. The emission tests from building materials resulted in TVOC emission rates of 0.011 $\~$ 3.108 mg/m$^{2}$h after 7 days. The general wall-papers emitted toluene abundantly and the natural wall-papers mainly emitted n-butanol and a minor amount of alkanes compound such as n -tetradecane. The remainder consisted of toluene, m,p -xylene, and styrene. The paints mainly emitted toluene and the adhesives mainly emitted chloroform as well as toluene. As a result, this study is expected to suggest meaningful data for future studies in exposure control through selecting healthy building materials and for the establishment of guidelines for various building materials in Korea.

• Restorative Dentistry and Endodontics
• /
• 제32권1호
• /
• pp.9-18
• /
• 2007

이 연구의 목적은 와동벽에서 다른 위치에서의 상아질 접착제의 두께를 평가하고, 이런 다양한 접착제의 두께와 미세 인장 강도 사이의 관계를 평가하기 위한 것이다. 여섯 개의 인간 대구치에 모든 상아질 면이 노출되도록 I급 와동을 형성하였다 3개의 치아는 filled adhesive ($Clearfil^{TM}$ SE bond)를 와동 내에 도포하였고, 다른 3개의 치아는 unfilled adhesives ($Scotchbond^{TM}$ Multi Purpose)를 도포하였다. 형광 현미경을 이용하여 접착층의 형태와 두께를 관찰하였다. 접착제의 두께는 수직 와동벽을 따라 와동 변연, 와동벽 1/2, 와동 내각의 세 지점에서 측정되었다. $Scotchbond^{TM}$ Multi Purpose와 $Clearfil^{TM}$ SE bond가 와동 변연과 와동벽 1/2, 와동 내각에서의 접착제의 두께를 재현하여 미세 인장 결합 강도를 측정하였다. 이 실험의 결과에서 두 가지 상아질 접착제 모두에서 와동 내각에서의 접착제의 두께가 와동 변연과 와동벽 1/2위치에서의 두께보다 두꺼웠으며, 와동 내각의 두꺼운 접착제의 미세 인장 결합 강도는 와동 변연과 와동벽 1/2에서의 얇은 접착제 두께의 미세 인장 결합 강도보다 유의성 있게 높게 나타났다.

• 구강회복응용과학지
• /
• 제27권1호
• /
• pp.81-90
• /
• 2011

resin infiltrant의 초기 우식 병소에 침투를 SEM과 CLSM을 사용하여 관찰하고, resin infiltrant와 3가지 접착제(All-bond 2, Scotchbond Multi-purpose, Clearfil SE bond)의 pH와 점도를 평가하고, 영구치에 resin infiltrant 적용 후 표면 조도와 미세경도의 변화를 측정하였다. 점도(Pa.s)는 resin infiltrant($0.173{\pm}0.012$), All-bond 2($0.754{\pm}0.030$), Scotchbond Multi-purpose($1.46{\pm}0.137$), Clearfil SE bond($1.28{\pm}0.125$)로 측정되었다. pH는 resin infiltrant (4.7), All-bond 2(7.5), Scotchbond Multi-purpose(8.2), Clearfil SE bond(4.67)로 측정되었다. resin infiltrant의 적용은 적용하지 않은 시편과 비교할 때 표면 조도와 미세경도에 유의한 차이를 보이지 않았다.(p>0.05).

• Restorative Dentistry and Endodontics
• /
• 제29권2호
• /
• pp.177-184
• /
• 2004

본 연구는 광중합형 상아질 접착제에서 광조사 시간의 증가가 접착제 표면의 미중합층에 대한 영향과 그에 따른 전단접착강도에 대해 연구하고자 120개의 치아를 아크릴 몰드에 식립한 후 상아질이 노출되도록 연마하였다. 3종류의 접착제 〔All Bond2 (AB2), One-Step (OS) and Adper Prompt (AP)〕를 40개 치아에 제조사의 지시대로 도포한 후 각각 다른 광조사 시간 (10, 20, 30 and 60sec)동안 광조사 하고 복합레진을 접착한 24시간 후 전단접 착강도를 측정하였다. 미중합층의 두께와 중합률은 슬라이드 글라스와 FT-NIR을 이용하여 FT-NIR spectrum에서의 peak height를 비교 측정하여 다음과 같은 결론을 얻었다. 1. 전단접착강도에서 AB2는 20초 이후 감소하고, AP는 30초까지 증가하였으며,OS는 차이를 보이지 않았다. 2. 미중합층 두께는 3가지 접착제 모두 유의성 있는 차이를 보이지 않았다. 3. 중합률에서 OS는 10초와 나머지군 사이에 유의성 있는 차이를, AP는 60초에서 유의성 있게 증가되고, AB2의 경우 차이를 나타내지 않았다.

• Journal of the Korean Wood Science and Technology
• /
• 제34권5호
• /
• pp.42-51
• /
• 2006

The this study, the effect of rice husk flour (RHF) as scavenger on formaldehyde emission rate and formaldehyde content from urea-formaldehyde (UF) resin bonded RHF content wood particleboards (PB). Two type of particle size ($30{\mu}m$ and $300{\mu}m$) of RHF was premixed with the UF resin at 5% and 15% by weight. The performance of UF resins is greatly influenced by the curing characteristics in their curing processing. The curing behavior was monitored activation energy ($E_a$) by DSC and pH variation according to RHF contents. PB with dimensions of $27cm{\times}27cm{\times}0.7cm$ was prepared at a specific gravity of 0.75 using $E_1$ and $E_2$ class UF resins. Formaldehyde emission and formaldehyde content from RHF filled PB bonded with UF resin was measured by 24 h desiccator and perforator method, respectively. RHF causes an increased pH of UF resin. $E_a$ of the modified UF resin decreased independently of RHF particle size. As the pH and the $E_a$ variation of the UF resin containing RHF increased, the amount of formaldehyde content decreased. The formaldehyde emission and formaldehyde content levels of the PB bonded with 15 wt% of $30{\mu}m$ RHF and $E_2$ type UF resin were low and satisfied grade $E_1$, as measured by 24 h desiccator and perforator method. The result of a comparison between 24 h desiccator and perforator test using PB showed that the linear regression analyses show a good correlation between the results for the 24 h desiccator and the perforator tests. The linear regression of a correlation between the desiccator and the perforator was Y=4.842X-0.064 ($R^2=0.989$). RHF was effective at reducing formaldehyde emission and formaldehyde content in urea-formaldehyde adhesives when used as scavenger.

• 한국산림과학회지
• /
• 제77권3호
• /
• pp.294-302
• /
• 1988

본(本) 실험(實驗)은 낙엽송(落葉松)(Larix leptolepsis) 수피(樹皮)로부터 추출(抽出)한 수피추출물(樹皮抽出物)의 특성(特性)을 조사(調査)하고 그들 추출물(抽出物)의 접착제화(接着劑化)의 가능성(可能性)을 평가(評價)하기 위해 실행되었다. 수율(收率)과 반응도(反應度)의 측정(測定)을 통해 온도(溫度) 및 시간(時間)의 영향(影響)과 탄산화(炭酸化) 및 설폰화(化)의 효과(效果)를 조사하였다. 목재접착제(木材接着劑)로의 적용(適用) 가능성(可能性)을 구명하기 위해서는 33% 농도(濃度)에서 점도(粘度)와 겔화시간(化時間)을 측정(測定)하였다. 그 결과(結果)는 다음과 같다. 1. 수율(收率)과 반응도(反應度)가 모두 높은 $80^{\circ}C$에서 120분(分)의 추출(抽出)이 적정온도(適正溫度) 및 시간(時問)이었다. 2. 탄산화(炭酸化)는 1% $Na_2CO_3$에서 설폰화(化)는 1% $Na_2SO_3$ : $NaHSO_3$와 0.25% $Na_2SO_3$에서 가장 큰 효과(效果)를 얻었으며 이들중 0.25% $Na_2SO_3$에 의한 설폰화(化)가 수율(收率)과 반응도(反應度)를 가장 크게 증가시켰다. 3. 온수추출액(溫水抽出液)의 수율(收率)은 17.2%이며 1% NaOH와 5% NaOH 추출액(抽出液)의 수율(收率)은 각각(各各) 38.6%와 44.6%이었다. 4. 온수추출액(溫水抽出液)의 반응도(反應度)는 68.8%로 가장 높았으며 1% NaOH와 5% NaOH 추출액(抽出液)의반응도(反應度)는 각각(各各) 49.3%와 25.8%이었다. 5. 각(各) 추출액(抽出液)은 33% 농도(濃度)에서 점도변화(粘度變化)가 매우 심했다. 특히 1% NaOH 추출액(抽出液)은 점도(粘度)가 매우 높았으며 5% NaOH 추출액(抽出液)은 오히려 점도(粘度)가 낮았다. 6. 추출액(抽出液)의 겔화시간(化時間)은 pH 7-10에서 가장 낮은 값을 나타냈으며 pH 4에서 가장 높은 값을 나타냈다. 파라포름알데히드의 이용(利用)은 37% 포름알데히드보다 겔화시간(化時間)을 더 연장시켜 주었다. 7. 온수추출(溫水抽出)의 설폰화(化)와 1% NaOH 추출(抽出)의 설폰화(化)를 제외(除外)한 다른 추출방법(抽出方法)은 높은 점도(粘度)(1% NaOH 추출(抽出))와 비경화성(比硬化性)(5% NaOH 추출(抽出), 5% NaOH 추출(抽出)의 설폰화(化)) 때문에 부적합한 것으로 밝혀졌다. 8. 접착제로(接着劑)로의 이용(利用)이 적합한 것으로 나타난 추출액(抽出液) 중 온수추출(溫水抽出)과 온수추출(溫水抽出)의 설폰화(化)는 반응도(反應度)가 뛰어난 반면 1% NaOH 추출(抽出)의 설폰화(化)는 비율면(比率面)에서 유리(有利)한 것으로 나타났다.