• 한국주조공학회지
• /
• 제27권5호
• /
• pp.212-216
• /
• 2007

과공정 Al-15wt.%Si 합금의 주단조 공정의 적용을 위해 주조 예비성형체를 제작하는 과정에서 P와 Sr을 첨가하여 과공정 Al-Si 합금의 응고과정에서 발생하는 초정 Si과 공정 Si의 미세화 개량처리를 행하였다. 미세화 조직의 변화에 따른 기계적성질 및 단조성을 조사하였으며, 미세화제로 첨가된 0.075wt.% Sr과 0.1wt.% P의 첨가에서 가장 효과적인 미세한 조직을 얻을 수 있었고, 인장강도와 연신율은 이들 첨가원가의 증가에 따라 향상되는 결과를 보였으나 일정 이상의 첨가에서는 더 이상의 향상은 없었다. 단조성 평가를 위한 열간가공 재현실험에서는 $450^{\circ}C$에서 약60N/mm2의 하중이 필요함을 알 수 있었다. 열간단조 및 열처리 후의 인장강도와 연신율은 보다 많은 향상을 가져왔으며, 이는 압축가공에 의한 주조 예비성형체 내부에 잔존하던 주조결함의 제어와 열처리에 의한 조직의 개량 및 균질화 효과에 의한 것으로 판단된다.

• 대한치과교정학회지
• /
• 제44권3호
• /
• pp.119-127
• /
• 2014

Objective: To evaluate the long-term effects of self-ligating brackets (SLBs) on transverse dimensions of arches and skeletal and soft tissues and to quantitatively evaluate the treatment outcome after non-extraction treatment with SLBs. Methods: The sample consisted of 24 (18 female and six male) subjects, with a mean age of $14.23{\pm}2.19$ years, who received treatment with the Damon$^{(R)}$3 appliances. Complete records including cephalometric radiographs and plaster models were obtained before treatment (T1), immediately after treatment (T2), six months after treatment (T3), and two years (T4) after treatment. Digital study models were generated. Twenty lateral cephalometric, six frontal cephalometric, and eight dental cast measurements were examined. The Peer Assessment Rating index was used to measure the treatment outcome. The Wilcoxon test was applied for statistical analysis of the changes. Results: There were significant increases in all transverse dental cast measurements with active treatment. There was some significant relapse in the long term, particularly in maxillary width (p < 0.05). Statistically significant increases were found in nasal (p < 0.001), maxillary base, upper molar, lower intercanine, and antigonial (p < 0.05) widths in T1-T2. Lower incisors were proclined and protruded in T1-T2. Conclusions: SLBs correct crowding by mechanisms involving incisor proclination and protrusion and expansion of the dental arches, without induction of clinically significant changes in hard and soft tissues of the face.

• 대한치과보철학회지
• /
• 제43권3호
• /
• pp.352-362
• /
• 2005

Statement of problem. Accurate impression is essential to success of implant prostheses. But there have been few studies about the accuracy of fixture-level impression techniques in internal connection implant systems. Purpose. The purpose of this study was to compare the accuracy of two fixture-level impression techniques in two conditions (parallel and divergent) and to assess the effect of tightening sequences and forces on stresses generated on superstructures in internal connection implant system (Astra Tech). Material and methods. Two metal master frameworks made from two abutments (Cast-to Abutment ST) each and a corresponding, passively fitting, dental stone master cast with four fixture replicas (Fixture Replica ST) were fabricated. Ten dental stone casts for each impression techniques (direct unsplinted & splinted technique) were made with vinyl polysiloxane impressions from the master cast. Strain gauges for each framework were fixed midway between abutments to measure the degree of framework deformation on each stone cast. Pairs of strain gauges placed opposite each other constituted one channel (half Wheatstone bridge) to read deformation in four directions (superior, inferior, anterior, and posterior). Deformation data were analyzed using one-way ANOVA and the Tukey test at the .01 level of significance. And the effect of tightening sequences (right-to-left and left-to-right) and forces (10 Ncm and 20 Ncm) were assessed with ten stone casts made from parallel condition by the splinted technique. Deformation data were analyzed using paired t-test at the .01 level of significance. Conclusions. Within the limitations of this study, the following conclusions could be drawn. 1. Frameworks bent toward the inferior side on all casts made by both direct unsplinted and splinted impression techniques in both parallel and divergent conditions. 2. There was no statistically significant difference of accuracy between the direct unsplinted and splinted impression techniques in both parallel and divergent conditions (P>.01). 3. There was no statistically significant difference of stress according to screw tightening sequences in casts made by the splinted impression technique in parallel condition (P>.01). 4. Greater tightening force resulted in greater stress in casts made by the splinted impression technique in parallel condition (P<.01).

• Bulletin of the Korean Chemical Society
• /
• 제16권4호
• /
• pp.326-331
• /
• 1995

Poly(enaryloxynitriles) containing Schiff bases were prepared from p-bis(1-chloro-2,2-dicyanovinyl)benzene (2) and various aromatic diols having Schiff base moiety by interfacial polymerization. The chemical structure of the polymers was confirmed through synthesis of their corresponding model compounds. All the polymers were soluble in polar aprotic solvents and their brittle films were cast from DMF solution. They showed a large exotherm around 340 ℃ attributable to the chemical change of dicyanovinyl group. Especially, curing of azomethine group was observed to occur at 390 ℃ by differential scanning calorimetry. According to the thermogravimetric analyses, they exhibited excellent thermal stability with 60-90% residual weight at 500 ℃ in nitrogen.

• 치위생과학회지
• /
• 제10권3호
• /
• pp.177-183
• /
• 2010

탄성 고무인상재의 종류인 폴리설파이드(polysulfide), 폴리이써(polyether), 부가중합형 실리콘(addition silicone)에서 점주도(consistency)가 Type III인 인상재를 각각 1종류 선택하여 증류수 $3.3{\mu}l$를 떠뜨려 접촉각을 측정하고, 세 종류의 인상체에 치과용 경석고를 부어 작업모형을 만들고 표면을 관찰하였다. 접촉각 측정은 전자동접촉 각 측정시스템(DM-700, KYOWA, Japan)을 이용하였고 작업모형의 표면관찰은 전계 방사형 주사 전자현미경(JSM-6700F, JEOL Ltd., JAPAN)을 이용하여 다음과 같은 결론을 얻었다. 1) 초기 접촉각의 평균과 표준편차는 부가중합형실리콘, 폴리이써, 폴리설파이드 제품이 각각 $91.3^{\circ}{\pm}20.5$, $90.0^{\circ}{\pm}2.2$, $101.5^{\circ}{\pm}2.3$로 평균값은 유사하게 나타났으나 부가중합형실리콘의 표준편차값에서 큰 차이를 보여줬다. 이는 술자의 술식에 따라 항상 일정한 특성을 보여주지 않는 다는 것이다. 2) 시간이 흐를수록 부가중합형실리콘 제품은 다른 두 종류에 비해 접촉각이 급속히 감소함을 관찰 할 수 있었고, 초기접촉각이 $91.3^{\circ}$이며 25초 후 $29.4^{\circ}$로 급격히 감소했다. 3) 폴리이써 제품은 초기접촉각이 $101.5^{\circ}$에서 25초 후의 접촉각 $90.7^{\circ}$이였고, 폴리설파이드 제품은 초기접촉각이 90.0에서 25초 후의 접촉각 84.2로 변화가 거의 일어나지 않았고 그 각도도 부가중합형실리콘에 비해 컸다. 4) 세 종류의 탄성고무인상재에서 시간이 흐름으로써 관찰된 접촉각은 유의성이 있었다(p<0.001). 5) 작업모형의 표면관찰에서 부가중합형실리콘이 가장 치밀했고, 그 다음 폴리설파이드, 폴리이써 순서였다. 따라서 탄성고무 인상재에 있어서 접착각이 작은 부가중합형 실리콘은 폴리이써나 폴리설파이드 제품에 비해 더 치밀한 작업모형을 얻을 수 있었고 세 종류의 인상재접착각에서 큰 유의성을 보였다. 그러나 부가중형 실리콘은 접촉각의 편차가 커 술자의 주의가 필요한 것으로 나타났고 폴리설파이드 제품과 폴리이써 제품은 20~25초 후 접촉각이 최초 접촉각과 큰 차이를 보이지 않아 소수성 제품으로 인상채득 시 주의가 요망되는 것으로 보여진다. 향후 Vitro 상태에서 인상재에 영향을 미치는 여러가지 요인들에 대한 계속적인 연구의 필요성을 느낀다.

• 한국환경보건학회지
• /
• 제40권2호
• /
• pp.127-136
• /
• 2014

Objectives: This study was conducted to investigate the removal of high odor concentration from swine wastewater treatment facility by full scale biofilter using liquid with deodorant mixed with earthworm cast and distillery sludge. Methods: The supply of the culture liquid to the microorganism on the media in the biofilter increases the activity and growth of biomass. The experimental equipment was biofilter tower with treatment capacity of 90 m 3/min. The experimental conditions included gas flow of $60m^3/min$, retention time of 20 sec, and gas/liquid ratio of 67. Results: With changing season from winter to summer, the inlet odor concentration of ammonia increased from 2.5 ppm to 29 ppm, and of hydrogen sulfide from 21 ppm to 91 ppm, respectively. The odor treatment system with biofilter using the culture liquid was stable when the high loading rate increased and showed excellent removal grade with an average of 96.7% for ammonia, and an average of 93.7% for hydrogen sulfide. The pH and SCOD in the recirculating culture liquid near the bottom of the biofilter tower decreased with operation time, but its influence on the odor removal rate was negligible, because the organic matter (SCOD) was replaced by some culture liquid supplied 2-4 times per day. Conclusions: The biofilter using culture liquid could successfully remove high odor concentration which was generated from swine wastewater treatment facility.

• 기술사
• /
• 제19권2호
• /
• pp.34-42
• /
• 1986

These brief studies and reports of the use of exposed aggrigate precast concrete in practice are combined with a description of some notable co-ordination such as shop drawing, manufacturing and erection in the field construction. Above mentioned exposed aggrigate P. C. means architectural P. C. which was used to the VOTRAKON site in Riyadh, Saudi Arabia. Fabricated P. C. on the site without autoclaving and steam curing plant had been successfully carried out on this project-core building, conference room and others. The project designed by HOPE/VTN international INC. which is located in San Diego, California U.S.A. stands for vocational training and related support facilities contract. We had to submit shop drawings showing complete information for fabrication and installation of P. C. unit reinforcement. Also we should be indicated member dimension and cross section, location size and type of necessary for erection. We can delineate the following characteristic results. One of the most important things how to handle exposed aggrigate P.C. unit as specified was quality assurance and co-ordination for shop drawing, manufacturing and erection.

• 대한치과보철학회지
• /
• 제36권2호
• /
• pp.323-335
• /
• 1998

Clinically, the curve of Spee is widely applied as a determined level of the occlusal curvature when the oral rehabilitation and the reconstruction of the prosthesis is needed at the malalignment dentition due to the missing, extrusion, and the inclination of the teeth. The purpose of this study was to analyze the curve of Spee of the occlusal curvature which influences to the occlusal form and the location three dimensionally, and then was to measure the radius and the degree of curvature of the curve of Spee and also was to investigate the influence to the cuspal inclination according to the change of the inclination of the curve of Spee which was analyzed by AutoCAD R.13 program at the gnathological cast and the cephalometric radiograph. The following results were obtained : 1. The radius of the curve of Spee was the mean of $11.74{\pm}3.64cm$ in the model, $12.75{\pm}4.63cm$ in the radiograph and there was no significant difference statistically between the model and the radiograph(P>0.001). 2. The radius and the degree of curvature of the curve of Spee showed negative correlation(r=-0.80), while the radius and the degree of curvature of the curve of Spee in relation to the length of the curve of Spee did not show correlation. 3. The case of the curve of Spee inclined to the posterior, that is. $Post.M{\theta}$ group showed the mean of $4.73{\pm}3.64$, positive correlation to the P2m, M1mm, M1dm, M2dm, and especially the greatest correlation coefficient to the mesial inclination angle of the mesio-buccal cusp tip of the first molar(r=0.70). 4. The case of the curve of Spee inclined to the anterior, that is, $Ant.M{\theta}$ group showed the mean of $3.28{\pm}3.59$, positive correlation to the P2m, M1mm, and also the greatest correlation coefficient to the mesial inclination angle of the mesio-buccal cusp tip of the first molar(r=0.78

• 대한치과보철학회지
• /
• 제32권2호
• /
• pp.225-233
• /
• 1994

The restorations of the severely damaged teeth by post core have been increased with the developement of endodontic procedures. But high failure rates of these procedures being reported, various restorative modifications were induced for successful treatments. Cast post-core and prefabricated post with core buildups are choice of treatment. The main causes of failure of the restorations are the fracture of post and core, root fracture, and recurrent caries due to microleakage. Recently, the acid etching technique and the use of dentin bonding agent at tooth surface to reduce the possible microleakage at the tooth-restoration interfaces were introduced. The object of this study was to measure and compare the microleakage by the types and cementation methods of post-core. For this study, forty extracted human anterior teeth were selected for specimen. After cleansing and routine endodontic procedures, anatomic crowns of each specimen were removed at the level of 2mm above the cementoenamel junction. Canals were preparated for post insertion and specimens were divided into four groups randomly. Post-cores were fabricated according to method for each group. Microleakage was measured by length of dye penetration at the tooth-restoration interfaces with measuring microscope at 50 magnification. Oneway ANOVA and t-test were performed for statistical analysis of resulting data. The following results were obtained from this study. 1. There wert significant statistical differences in degree of microleakage between each group (p<0.01). 2. Cast post-core cemented with ZPC (Group I) showed the most severe microleakage pattern$(1.5547{\pm}0.0872mm)$, and cast post-core cemented with adhesive resin cement after tooth surface treatment with dentin bonding agent (Group II) showed the least microleakage $(0.1497{\pm}0.0872mm)$. 3. Group IV revealed less dye penetrations than group III, but no statistical significance was seen between two groups.

• 한국과학교육학회지
• /
• 제34권4호
• /
• pp.407-415
• /
• 2014

유전자 결정론은 유전자가 인간의 생물학적인 특성 뿐 아니라 사회적인 특성까지도 결정한다고 보는 철학적 견해이다. 그럼에도 불구하고 여전히 일반대중과 생명과학자들이 유전자 결정론을 주장하곤 한다. 클레몽의 KVP모델에 의하면(Cl$\acute{e}$ment & Carvalho, 2007; Cast$\acute{e}$ra & Cl$\acute{e}$ment, 2012) 과학교육에서 교사들의 유전자 결정론은 학생들의 유전에 대한 개념 형성에 영향을 준다. 본 연구에서는 우리나라 교사들이 가지고 있는 유전자 결정론에 대한 인식을 조사하였다. 이를 위해 선행연구(Cast$\acute{e}$ra & Cl$\acute{e}$ment, 2012)의 설문지를 번역하여 생명과학, 국어 및 초등학교의 예비교사 151명, 현직교사 157명의 총 308명을 대상으로 설문 조사를 실시하였다. 응답결과에 대해 요인분석을 활용하여 주요 요인들을 추출하였으며 일원분산분석을 실시하여 교사 집단별 요인들의 차이를 분석하였다. 요인분석 결과 4개의 요인이 추출되었는데, 요인1은 남녀의 차이가 유전적으로 결정된다고 보는 관점, 요인2는 개인의 지적능력이 유전적으로 결정된다고 보는 관점, 요인3은 개인의 면역작용과 행동적 특징이 유전적으로 결정된다고 보는 관점이었으며, 요인4는 민족의 특징이 유전적으로 결정된다고 보는 관점이었다. 이 네 가지 요인에 대한 전공교과 집단별 인식 차이를 분석한 일원분산분석 결과 요인1(F=3.325, p=.006), 요인3(F=3.320, p=.006), 요인4(F=4.325, p=.001)에서 유의한 차이를 나타냈다. 사후 비교를 한 결과 생명과학 교사와 다른 교사들 사이에 유의한 차이는 없었다. 현직교사와 예비교사로 구분하여 분석한 결과, 요인1(t=-3.938, p=.000)과 요인4(t=-3.121, p=.002)에서 유의한 차이가 나타났는데 예비교사보다 현직교사가 더 유전자 결정론적 인식이 강했다. 네 요인에 대한 교사들의 종교별 차이를 분석한 결과에서는 유의한 차이가 나타나지 않았다.