• 유체기계공업학회:학술대회논문집
• /
• 2006.08a
• /
• pp.349-352
• /
• 2006

The conventional segregated finite element formulation produces a small and simple matrix at each step than in an integrated formulation. And the memory and cost requirements of computations are significantly reduced because the pressure equation for the mass conservation of the Navier-Stokes equations is constructed only once if the mesh is fixed. However, segregated finite element formulation solves Poisson equation of elliptic type so that it always needs a pressure boundary condition along a boundary even when physical information on pressure is not provided. On the other hand, the conventional integrated finite element formulation in which the governing equations are simultaneously treated has an advantage over a segregated formulation in the sense that it can give a more robust convergence behavior because all variables are implicitly combined. Further it needs a very small number of iterations to achieve convergence. However, the saddle-paint-type matrix (SPTM) in the integrated formulation is assembled and preconditioned every time step, so that it needs a large memory and computing time. Therefore, we newly proposed the P2PI semi-segregation formulation. In order to utilize the fact that the pressure equation is assembled and preconditioned only once in the segregated finite element formulation, a fixed symmetric SPTM has been obtained for the continuity constraint of the present semi-segregation finite element formulation. The momentum equation in the semi-segregation finite element formulation will be separated from the continuity equation so that the saddle-point-type matrix is assembled and preconditioned only once during the whole computation as long as the mesh does not change. For a comparison of the CPU time, accuracy and condition number between the two methods, they have been applied to the well-known benchmark problem. It is shown that the newly proposed semi-segregation finite element formulation performs better than the conventional integrated finite element formulation in terms of the computation time.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.33 no.4
• /
• pp.242-247
• /
• 2009

AILU type preconditioners for a two-dimensional combined P2P1 finite element formulation of the interaction of rigid cylinder with incompressible fluid flow have been devised and tested by solving fluid-structure interaction (FSI) problems. The FSI code simulating the interaction of a rigid cylinder with an unsteady flow is based on P2P1 mixed finite element formulation coupled with combined formulation. Four different preconditioners were devised for the two-dimensional combined P2P1 finite element formulation extending the idea of Nam et al., which was proposed for the preconditioning of a P2P1 mixed finite element formulation of the incompressible Navier-Stokes equations. It was found that PC-III or PC-IV among them perform well with respect to computational memory and convergence rate for some bench-mark problems.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.1
• /
• pp.506-512
• /
• 2017

The purpose of this study was to improve release rate and bioavailability of nateglinide formulation. Polymorphism selection and particle size control were performed to enhance formulation dissolution rate, and a pH modifier was included in the formulation to overcome pH-dependent solubility of nateglinide. The enhanced dissolution rate was characterized by using a dissolution test. The results showed that H-type raw material had a higher dissolution rate than that of B-type raw material. There was 6.2% difference in dissolution between the two materials at 60 min. With regard to particle size, raw material with a $1.13{\mu}m$ particle size showed a 20% faster release rate than that of raw material with a $2.28{\mu}m$ particle size. Furthermore, fumaric acid was included in formulation as a pH modifier. That addition produced a greater than 50% improvement in dissolution rate. In conclusion, dissolution rate of nateglinide can be enhanced by optimizing its polymorphism and particle size; moreover, a synergistic effect on the enhancement of dissolution rate is obtained by including fumaric acid, a pH modifier, in the formulation.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.36 no.5
• /
• pp.454-457
• /
• 2003

A feeding trial was carried out to investigate the utilization of dietary soybean meal and wheat flour as substitutes for fish meal and alginate in different dietary types (powder, pellet and flake) for juvenile snail (Semisulcospira gottschei). After 10 weeks feeding trial, survival was not affected by formulation and type of diets (P>0.05), but weight gain was significantly affected by dietary formulation (P<0.001) and type (P<0.05). In the same dietary formulation, weight gain of the snail fed the flake type of diets was lower than that of the snail fed the powder or pellet types. However, the type of diet did not affect weight gain when snail fed diets containing $37\%$ soybean meal and $18\%$ alginate. The weight gain was lower in the snail fed diets containing $25\%$ fish meal compared with that of the snail for diets containing $33-37\%$ soybean meal at the same dietary type. When soybean meal was used as main protein source in diets, weight gain was not affected by dietary alginate $(0\;and\;18\%)$ and wheat flour $(36\;and\;58\%)$ contents. Crude protein and ash contents of whole body of the snail was not affected either by formulation or by type of diet. Moisture and crude lipid contents of the whole body were significantly affected by dietary formulation, but not by the type. These results indicate that $25\%$ fish meal could be replaced by $37\%$ soybean meal as dietary protein source, and pellet and powder could be desirable dietary type for the optimum growth of the snail.

• Journal of Pharmaceutical Investigation
• /
• v.32 no.2
• /
• pp.95-101
• /
• 2002

Matrix tablets of nifedipine (NP) were prepared with Eudragit, diluent (lactose or Ca. phosphate) and Mg. stearate employing two different preparation methods (wet granulation and direct compression) to develop its sustained-release dosage forms. The effects of various formulation factors on the dissolution rate of the drug were investigated. Dissolution test was studied in pH 6.8 phosphate buffer containing 1% sodium lauryl sulfate using the paddle method. Formulation factors were the type and content of Eudragit, the type of diluent and the tablet preparation method. The optimum formula of NP matrix tablet, which resulted in a similar dissolution profile to that from Adalat Oros used as a reference, was 30 mg NP, 10% Eudragit RS, 2% Mg. stearate and an adequate quantity of lactose to yield 500 mg weight using the wet granulation method.

• Archives of Pharmacal Research
• /
• v.29 no.9
• /
• pp.786-794
• /
• 2006

We observed the suppressive effect of a powder formulation of African black tea extract prepared from the leaves of Camellia sinensis on type 2 non-insulin dependent diabetic mice, $KK-A^y/TaJcl$. Black tea extract significantly showed suppressive effect of the elevation of blood glucose on oral glucose tolerance test of 8 week-old $KK-A^y/TaJcl$ mice (p<0.05). Long-term treatment with black tea extract showed significant suppression of post-prandial blood glucose and obesity (p<0.05). The weight of the intestine of mice treated with black tea extract was significantly reduced (p<0.05). From these results, African black tea used in this study showed a suppressive effect on the elevation of blood glucose during food intake and the body weight.

• YAKHAK HOEJI
• /
• v.43 no.4
• /
• pp.447-457
• /
• 1999

The purpose of this study is to prepare the adhesive type patch containing flurbiprofen, and to demonstrate the feasibility of flurbiprofen administration through the intact skin using adhesive type patch preparation. For this purpose, two pressure sensitive adhesives, Polyisobutylene(PIB) and $Gelva^{\circledR}737$, were selected from the chemical grade of polymers, and the adhesive type patches of flurbiprofen were prepared. The release rate of flurbiprofen from the PIB-based adhesive patch was higher than that from $Gelva^{\circledR}737$ based adhesive patch. The release rate of flurbiprofen from the PIB-based A-type patch with 1.0mm, 1.5mm or 2.0mm thicknesses followed the first order kinetics. In the skin permeation study, using male hairless mouse skin, a monophasic skin permeation profile was observed with 1% flurbiprofen loading dose. The inclusion of palmitic acid or SLS(0.25~0.5%) as an enhancer produced a remarkable enhancement in the skin permeation rate of flurbiprofen, and the percentile ratio of drug and enhancer appeared to be important for the effective enhancement. In the in vivo percutaneous absorption study, the plasma concentration of the optimal formulation was significantly (p<0.01) higher than that of the conventional cataplasma ($Bifen^{\circledR}$). These studies demonstrate a good feasibility of flurbiprofen administration through the intact skin using a transdermal patch, and show a possibility of the development of flurbiprofen patches.

• Asian-Australasian Journal of Animal Sciences
• /
• v.29 no.2
• /
• pp.263-270
• /
• 2016

This study was conducted to investigate the effects of raw material ratio on the physicochemical characteristics of emulsion-type pork sausages. Experiment design was divided into 12 treatments, based on protein level (P), fat level (3P, 3.5P, and 4P), and water level (4P+10, 4P+15, 4P+20, and 4P+25). The pH and shear force values were significantly higher in T7 (3.5P fat and 4P+20 water) than those of other treatments. The lightness and redness were greatly reduced by increasing the quantity of water. The treatments containing 3P fat and 4P+20 water had the highest values of cohesiveness, springiness, gumminess, and chewiness. On the whole, when the protein (P) and fat (3P, 3.5P, 4P) levels were fixed, an increase over the appropriate moisture level deteriorated many physicochemical characteristics.

• YAKHAK HOEJI
• /
• v.45 no.5
• /
• pp.468-475
• /
• 2001

Fenofibrate is a fibric acid derivative that is a strong reducer of triglyceride. Micronozed formulation of fenofibrate has improved bioavailability compared to non-micrornized formulation. This study performed a retrospective comparison of micrornized and non-micrornized fenofibrate (28 in micronized and 51 in non-micronized group) by comparing the means of changes in total triglyceride, total cholesterol, HDL-cholesterol and TC/HDL ratio in type 2 diabetics with dyslipidemia The result skewed that after 12 weeks of treatment both drugs produced a significant reduction in total triglyceride levels (62% with micronized, 37% with non-micronized). The mean decrease observed for total triglyceride levels were significantly lower for micronized fenofibrate (p<0.001). Both drugs showed a significant reduction for total cholesterol levels (-22% with micronized, -14% with non-micronized fenofibrate). The mean decrease observed for total cholesterol was not significantly different between the two drugs (p>0.05). HDL-cholesterol levels increased by 24% and 15%) with micronized and non-micronized, respectively and the differences from the baseline were statistically significant for both drugs (p<0.05). The mean change of HDL-cholesterol was not significantly different between the two drugs. There was a statistically significant reduction in TC/HBL-cholesterol ratio from baseline for both drugs (7.1 to 4.8 with micronized and 5.1 to 4.5 with non-micronized), and the reduction of TC/HDL-cholesterol ratio tended to be significantly greater with micronized fenofibrate (p<0.05). This study shows that short-term treatment with micronized fenofibrate is more effective than non-micronized fenosbrate in type 2 diabetes patients with dyslipidemia.

• Journal of the Korean Applied Science and Technology
• /
• v.38 no.4
• /
• pp.1176-1182
• /
• 2021

In this study, the emulsion stability of henna, a natural hair dye, according to the content of cetyl alcohol, one of the emulsification stabilizers, was analyzed, and the content of cetyl alcohol showing the most stable emulsification was confirmed. To analyze the emulsion stability, differences in particle size, particle shape, viscosity, and color after dyeing were compared according to the content of cetyl alcohol. As a result of dynamic light scattering (DLS) zeta analysis, cetyl alcohol 3% showed the highest zeta potential value of 115.9 mV, and the particle size distribution was henna in which a cream-type hair dye containing 3% cetyl alcohol was dispersed in distilled water. The width of the particle size distribution was narrow compared to. As a result of viscometer analysis, the viscosity increased as the content of cetyl alcohol increased. As a result of measuring the henna pH of the cream formulation, it was measured in a pH range suitable for the scalp. As a result, emulsion stability increases as the content of cetyl alcohol increases in henna cream formulations for hair dye.