In order to develop pH-sensitive liposomes that are stable in plasma, liposomes containing membrane-spanning bipolar amphiphiles as protonatable components were studied. Sonicated small unilamellar liposomes composed of dioleoylphosphatidylethanol amine (DOPE), dioleoylphosphatidylcholine (DOPC) and bis(6-hemisuccinyloxyhexyl) fumarate (BHF) in a 3 : 1 : 1 molar ratio are stable at neutral pH, but destabilized at weakly acidic pH with 50% leakage of entrapped materials at about pH 5.5. The liposomes are relatively stable in plasma such that only a few percent entrapped calcein was released in 50% plasma within 1.5 h incubation at 37 ℃, while about 10% entrapped calcein was released from sonicated liposomes composed of DOPE, DOPC, and oleic acid (OA) in a 3 : 1 : 1 molar ratio under the identical conditions. The aqueous contents mixing and lipid components mixing experiments suggest that the protonation of BHF may induce fusion between the liposomes, followed by the release of the entrapped materials.
The purpose of this study was to observe the inital acidity of zinc phosphate cements(Confit and Super Cem), poly carboxylate cement(Unident and Poly F), zinc oxide engenol cement(Stailine Super EBA) and g1ass ionomer cement(Fuji ionomer) Each cement was manuplated in accordance with each manufacturer's direction. All cements were mixed at the room temperature of $23^{\circ}{\pm}$, $5^{\circ}C$, and the electrode of pH meter(Ionanalyzer) was inserted in the mixed cement, and the acidity of cement were measured for 20 minutes from begining of cement mixing at $23^{\circ}C$ and $37^{\circ}C$ Results were as follows 1. The acidity of all cements ranges from pH 3, 5 to 4, 5 at 2 minutes after the start of mixing 2. The value of pH at $23^{\circ}C$ was higher than the value of pH at $37^{\circ}C$ in all cements. 3. As the time elapsed, the pH in all cements rose. The 20 minutes after the start of mixing the range of acidity was from pH 5 to pH 6 except Poly F. 4. In polycarboxylate cement, the different value of acidity at $23^{\circ}C$ and $37^{\circ}C$ was greatest. 5. The curve pattern of acidity in Unident was similar to that in Poly F cement The pH value of Unident was higher then that of Poly F, and value of pH in the curve pattern of acidity in Confit were similar to those in Super cement.
Son Tae-Won;Kim Byung-Giu;Park Young-Mi;Lim Hak-Sang;Kwon Oh-Kyung
Macromolecular Research
/
v.14
no.3
/
pp.267-271
/
2006
Polyelectrolyte complex films were prepared with two compounds, chitosan and poly(ethylene glycol)-monosuccinate, using a casting in order to synthesize a polyelectrolyte complex film with various mole ratios of chitosan and poly(ethylene glycol)-monosuccinate. The solution properties of isolated PEC were investigated for the effects of FTIR, pH value, Brookfield viscosity and cell viability assay using MTT staining. The PEC films were evaluated for mechanical properties by typical stress-strain curve, far thermal properties by DSC and TGA and for surface morphology Properties by SEM. Furthermore, the surface resistance, moisture regain and water content of the films were characterized. The solution properties were affected by several factors including the chitosan content in the PEC, the mixing ratio of PEG and chitosan, and pH. Several PEC in acidic conditions exhibited film formation under appropriate conditions of mixing ratio and chitosan concentration in the mixing process. These PEC films were found to have sufficiently flexible and stable properties due to their hydrophilic structure, which was farmed by the oppositely charged interaction between PEG-MS and chitosan matrix. The results showed the potential applicability of chitosan and poly(ethylene glycol)-monosuccinate films as a biocompatible polymer.
Kim, Kwang-Sik;Cho, Eun-Seok;Kim, Young-Hwa;Kim, Jo-Eun;Seol, Kuk-Hwan;Kim, Ki-Hyun
Korean Journal of Agricultural Science
/
v.42
no.3
/
pp.231-235
/
2015
This study was performed to investigate the change of the body surface temperature during socialization of weaning pigs. A total of 108 piglets (Landrace 60 and Yorkshire 48) aged 31 (${\pm}1.1$) day was used for this study. Experiment was designed as follows; familiar group (T1), randomly mixed with unfamiliar piglets (T2), mixed based on weight of unfamiliar piglet (T3). The transport and mixing of pigs were performed at 10:00, and then body surface temperature was taken by thermo-graphic camera after 4 hours (14:00). Average surface temperature and hot-spot-temperature, which is the hottest spot of the body surface, were analyzed using Testo IRsoft 3.1 software. Average temperature of body surface were 36.0, 38.2, and 37.5 in T1, T2, and T3, respectively. Average of body surface temperature in T2 and T3 were higher (p<0.001) than T1, and average temperature of body surface of T3 was greater (p<0.001) than that of T2. The hot-spot-temperature of T1, T2, and T3 were 38.7, 39.5, and 39.6, respectively. The hot-spot-temperature of T2 (p<0.01) and T3 (p<0.001) were significantly higher than that of T1. Above results demonstrate that grouping unfamiliar pigs leads to increase in the body temperature possibly by pigs aggressive behavior during social conflict. By the result on average body temperature, this study suggests that the mixing with similar body weight would increase the struggle time and frequency.
Kim Dong Sung;Lee Se Hwan;Kwon Tai Hun;Ahn Chong H.
Transactions of the Korean Society of Mechanical Engineers A
/
v.29
no.10
s.241
/
pp.1298-1306
/
2005
In this paper, Part II, we realized the Serpentine Laminating Micromirer (SLM) which was proposed in the accompanying paper, Part I, by means of the injection molding process in mass production. In the SLM, the higher level of chaotic mixing can be achieved by combining two general chaotic mixing mechanisms of splitting/recombination and chaotic advection by the successive arrangement of 'F'-shape mixing units in two layers. Mold inserts for the injection molding process of the SLM were fabricated by SU-8 photolithography and nickel electroplating. The SLM was realized by injection molding of COC (cyclic olefin copolymer) with the fabricated mold inserts and thermal bonding of two injection molded COC substrates. To compare the mixing performance, a T-type micromixer was also fabricated. Mixing performances of micromixers were experimentally characterized in terms of an average mixing color intensity of a pH indicator, phenolphthalein. Experimental results show that the SLM has much better mixing performance than the I-type micromixer and chaotic mixing was successfully achieved from the SLM over the wide range of Reynolds number (Re). The chaotic micromixer, SLM proposed in this study, could be easily integrated in Micro-Total-Analysis- System , Lab-on-a-Chip and so on.
Ku, Su-Kyung;Park, Jong-Dae;Sung, Jung-Min;Choi, Yun-Sang
Korean Journal of Agricultural Science
/
v.48
no.3
/
pp.535-544
/
2021
When baking, the proper blending or mixing of materials will affect the quality of the product. The mixing strength is important when establishing the optimal conditions for batter, and control of the mixing condition is accordingly an important factor. This study investigated the effects of the mixing speed and time on the quality characteristics of a gluten-free type of rice batter. The batter samples manufactured for this purpose are as follows: control (+) (wheat flour), control (-) (rice flour), T1 (1,800 rpm, 1 min), T2 (1,800 rpm, 2 min), T3 (1,800 rpm, 3 min), T4 (3,600 rpm, 1 min), T5 (3,600 rpm, 2 min), T6 (3,600 rpm, 3 min). In this study, rice flour was used in the T1 to T6 samples. The pH of the batter tended to be higher when the mixing speed was slower and the time was shorter depending on the ultra-high mixing conditions. The moisture content of T3 was highest, and there was no difference according to the ultra-high speed conditions. The specific volumes of the ultra-high mixing treatments were higher than those of the control samples. The relationship between the specific volume, hardness and springiness of rice bread according to the mixing speed and time was weak. Therefore, it is considered that the application of ultra-high speeds when manufacturing gluten-free batter can have a positive effect on improving the production efficiency by reducing the processing time.
This study was conducted to ivestigate the quality of modeled chinese-cabbage Kimchi. The mutual action of sub-ingredients and optimum mixing conditions were examined by analyses of pH, acidity, content of vitamins, carotenes, number of total microorganism, and Lactobacilli, the activities of softening related to enzymes (polygalacturonase and ${\beta}$-galactosidase), and sensory quality during fermentation. The result about the mutual action of red pepler powder and garlic showed that the pH was decresed as concentration of garlic was higher and that of red peppler powder became lower. Kimchi had unpleasant taste and undesirable odor when the adding ratio of the peper powder and garlic was unbalanced. As the concentration of garlic became higher, the content of vitamin C in Kimchi tissue decreased while that of vitamin C in Kimchi juice increased. The contents of vitamin B1, B2 and carotene increased as the concentration of garlic became lower. The optimum mixing ratio of red pepper powder and garlic evaluated by overall eating quality was 4.66% and 3.45%, respectively. The result about the mutual action of ginger and green onion was that pH became higher as the concentration of ginger was 1.84% and that of green onion was 5.96%. The intensity of fresh taste and odor became stronger as the concentration of ginger increaed to 2.76% and that of green onion decreased to 2.98%. The balance of sour, salty and hot taste became better as the concentration of ginger increased and that of green onion decreased. The optimum mixing condition evaluated by overall eating quality was 2.94% in ginger + 2.78% in green onion. The contents of vitamin B1, B2 and C were high in this condition. The result about the mutual action of leek and salted anchovy juice was that pH became lower as the concentration of leek increased and that of salted anchovy juice decreased. Sour, hot and sweet tastes were good in the condition of leek 12%, salted anchovy juice 4.69%. Palatable, fresh taste and odor became weaker when the one of both sub-ingredients was too much little. The optimum mixing condition evaluated by overall easting quality was 9.76% in leek + 7.32% in salted anchovy juice. The contents of vitamin B1, B2, C and carotene were high in this condition and other sensory qualities were good. The result about the mutual action of salt and sugar was that pH became lower as the concentration of sugar became higher and that of salt became lower. The sweet taste was reduced of hot taste than salty taste. Palatable and fresh tastes were desirable when Kimchi fermented with less salt and more sugar. The optimum mixing condition evaluated by overall eating quality was 3.29% in sugar + 4.80% in salt. The contents of vitamin B1, B1, C and carotene were high in this condition. The result of model Kimchi fermented at 20$^{\circ}C$ was that the number of Lactobacilli in model Kimchi was higher than that of in control Kimchi. The fermentation period was extended under pH 4.0 and the contents of vitamin B1, B1,C and carotene were high through the whole edible period. The activity of polygalacturonase was low, but that of ${\beta}$-galactosidase was high during fermentation.
Journal of The Korean Society of Grassland and Forage Science
/
v.30
no.2
/
pp.159-168
/
2010
This study was carried out to investigate the effects of by-product mixing silage feeding on the eating and ruminating behavior of fattening Hanwoo steer. A total of 12 Hanwoo steers (21 months old) were divided into three feeding groups and assigned to 3 dietary treatments: control (C: concentrate + ad libitum feeding of rice straw), and by-product mixing silage groups (T1: concentrate + 1 kg restricted feeding of by-product mixing silage + ad libitum feeding of rice straw, T2: concentrate + ad libitum feeding of by-product mixing silage). Eating behaviors were observed for 48 hours. Total feed intake was high in the order of T1 > C > T2, but not significantly different among the treatments. The eating and chewing time were significantly higher in C than by-product mixing silage treatments (P<0.05). Ruminating and resting time were not significantly different among the treatments. Number of bolus, number of total chews and number of chews per bolus were not significantly different among the treatments. But ruminating time per bolus and FVI (feed value index) were significantly higher in C than T1 and T2 (p<0,01, 0.05). Bolus per minute was the highest in T1 (p<0.01). Number of drinking was significantly higher in T2 than C and T1 (p<0.05), but defecating and urinating were not significantly difference among the treatments. Eating rate was the highest in T2 (p<0.05), but ruminating and chewing efficiency were not significantly difference among the treatments. Consequently, there was no big difference on eating behavior when feed by-product silage comparing with rice straw. Therefore, it is thought that by-product mixing silage could be the alternative for the rice straw.
CFD analysis has been conducted to find the two stage impeller configuration which is the most suitable for a stirred tank with an internal helical cooling coil and a cooling jacket, which is frequently used in chemical industries for highly exothermic reactions ranged from low to medium viscosity. Two typical types of impellers are considered; pitched paddle impellers and Rushton turbine impellers. Interestingly, pitched paddle impellers show a good mixing performance for multi-species, whereas Rushton turbine impellers achieve a good mixing performance for multi-phases. Besides the type of an impeller, the location of an impeller is another important factor to be considered in order to accomplish an effective mixing. The best set of types and locations of two impellers is recommended based on the coefficient of variation(CoV) value and the heat removal capability obtained from CFD results. The former is a measure to quantify the degree of mixing.
In this study, we investigated the effects of mixing on the aggressive behavior of commercially housed pigs. The behavioral patterns of 36 groups of pigs (a total of 360 animals) were observed over 3 consecutive days directly after weaning ($25{\pm}1.2$ days of age), and 25 and 50 days later with the aid of video technology. Fight latency and total duration and frequency of fighting were significantly different among the age groups. The aggressive behaviors decreased in 75-day old pigs if compared to 25- and 50-day old animals. Moreover, dominance index (DI) was higher in 25-day old and lower in 75-day old pigs. A comparison of dominant (DI>0) and submissive (DI<0) pigs showed significant differences (p<0.05) for major aggressive behaviors in all age groups. Dominant pigs were involved in more aggressive interactions, had longer fights, and initiated more fights than submissive pigs. Post-mixing aggressive behavior was altered by previous experience of mixing. Aggressive behavior and DI are suitable methods for analyzing the effects of mixing on commercially housed growing pigs.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.