• JSTS:Journal of Semiconductor Technology and Science
• /
• v.8 no.3
• /
• pp.221-226
• /
• 2008

A new two dimensional (2-D) analytical model for the Threshold Voltage on dual material surrounding gate (DMSG) MOSFETs is presented in this paper. The parabolic approximation technique is used to solve the 2-D Poisson equation with suitable boundary conditions. The simple and accurate analytical expression for the threshold voltage and sub-threshold swing is derived. It is seen that short channel effects (SCEs) in this structure is suppressed because of the perceivable step in the surface potential which screens the drain potential. We demonstrate that the proposed model exhibits significantly reduced SCEs, thus make it a more reliable device configuration for high speed wireless communication than the conventional single material surrounding gate (SMSG) MOSFETs.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.11 no.9
• /
• pp.683-686
• /
• 1998

Hot carrier effects as a function of bias stress time and bias stress consitions were syste-matically investigated in p-channel poly-Si TFT s fabricated on the quartz substrate. The device degradation was observed for the negative bias stress, while improvement of electrical characteristic except for subthreshold slope was observed for the positive bias stress. It was found that these results were related to the hot-carrier injection into the gate oxide and interface states at the poly-Si/$SiO_2$interface rather than defects states generation within the poly-Si active layer under bias stress.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1997.11a
• /
• pp.266-269
• /
• 1997

Hot carrier effects as a function of bias stress time and bias stress conditions were syste-matica1ly investigated in p-channel po1y-Si TFT's fabricated on the quartz substrate. The device degradation was observed for the negative bias stress. After positive bias stressing, Improvement of electrical characteristic except for subthreshold slope was observed. It was found that these results were related to the hot carrier injection into the gate oxide and interface states at the poly-Si/SiO$_2$interface rather than defects states generation under bias stress.

• Journal of Sensor Science and Technology
• /
• v.30 no.5
• /
• pp.295-299
• /
• 2021

In this study, we present a complementary metal-oxide-semiconductor (CMOS) binary image sensor. It can shoot an object rotating at a high-speed by using a gate/body-tied (GBT) p-channel metal-oxide-semiconductor field-effect transistor (PMOSFET)-type photodetector. The GBT PMOSFET-type photodetector amplifies the photocurrent generated by light. Therefore, it is more sensitive than a standard N+/P-substrate photodetector. A binary operation is installed in a GBT PMOSFET-type photodetector with high-sensitivity characteristics, and the high-speed operation is verified by the output image. The binary operations circuit comprise a comparator and memory of 1- bit. Thus, the binary CMOS image sensor does not require an additional analog-to-digital converter. The binary CMOS image sensor is manufactured using a standard CMOS process, and its high- speed operation is verified experimentally.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.46 no.4
• /
• pp.21-27
• /
• 2009

In this work, Er-silicided SB-SOI nMOSFET and Pt-silicided SB-SOI pMOSFET have been fabricated to investigate the current-voltage characteristics of Schottky barrier SOI nMOS and pMOS at elevated temperature. The dominant current transport mechanism of SB nMOS and pMOS is discussed using the measurement results of the temperature dependence of drain current with gate voltages. It is observed that the drain current increases with the increase of operating temperature at low gate voltage due to the increase of thermal emission and tunneling current. But the drain current is decreased at high gate voltage due to the decrease of the drift current. It is observed that the ON/Off current ratio is decreased due to the increased tunneling current from the drain to channel region although the ON current is increased at elevated temperature. The threshold voltage variation with temperature is smaller and the subthreshold swing is larger in SB-SOI nMOS and pMOS than in SOI devices or in bulk MOSFETs.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.6 no.2
• /
• pp.61-67
• /
• 2006

We fabricate local damascene FinFET cell array in sub-60nm feature sized DRAM. The local damascene structure can remove passing-gate-effects in FinFET cell array. p+ boron in-situ doped polysilicon is chosen for the gate material, and we obtain a uniform distribution of threshold voltages at around 0.7V. Sub-threshold swing of 75mV/d and extrapolated off-state leakage current of 0.03fA are obtained, which are much suppressed values against those of recessed channel array transistors. We also obtain a few times higher on-state current. Based on the improved on- and off-state current characteristics, we expect that the FinFET cell array could be a new mainstream structure in sub-60nm DRAM devices, satisfying high density, low power, and high-speed device requirements.

• ETRI Journal
• /
• v.33 no.6
• /
• pp.887-896
• /
• 2011

We investigated the effects of a gate dielectric and its solvent on the characteristics of top-gated organic field-effect transistors (OFETs). Despite the rough top surface of the inkjet-printed active features, the charge transport in an OFET is still favorable, with no significant degradation in performance. Moreover, the characteristics of the OFETs showed a strong dependency on the gate dielectrics used and its orthogonal solvents. Poly(3-hexylthiophene) OFETs with a poly(methyl methacrylate) dielectric showed typical p-type OFET characteristics. The selection of gate dielectric and solvent is very important to achieve high-performance organic electronic circuits.

• Journal of Sensor Science and Technology
• /
• v.33 no.5
• /
• pp.338-343
• /
• 2024

The measurement of pH is of significant importance in chemistry, life sciences, and environmental monitoring. Unlike conventional pH sensors that utilize glass electrodes, thin-film transistor (TFT)-based pH sensors offer distinct advantages, including enhanced response speed and additional circuit functions. In this study, we developed a pH sensor that incorporates biocompatible parylene-C as both the substrate and sensing layer, thereby enhancing flexibility, transparency, and biological compatibility. We conducted tests to measure the voltage-current characteristics of the pH solutions and assessed their performance in terms of drift and hysteresis. Using InGaZnO (IGZO) as the channel material, our pH sensor demonstrated an average sensitivity of approximately 82 mV/pH, albeit with certain drift limitations. The initial pH measurements exhibited good reversibility over time. IGZO- and parylene-C-based TFT pH sensors are well suited for various applications, including wearable health monitoring, owing to their flexibility and biocompatibility.

• Transactions on Electrical and Electronic Materials
• /
• v.1 no.1
• /
• pp.40-44
• /
• 2000

Metal-ferroelectric-insulator-semoiconductor field effect transistor (MFISFETs) were fabricated using CMOS processes. The Pt/SBT/NO combined layers were etched for forming a conformal gate by using Ti/Cr metal masks and a two step etching method, By the method, we were able to fabricate a small-sized gate with the dimension of $16/4{\mu}textrm{m}$ in the width/length of gate. It has been chosen the non-self aligned source and drain implantation process, We have deposited inter-layer dielectrics(ILD) by low pressure chemical vapor deposition(LPCVD) at $380^{circ}C$ after etching the gate structure and the threshold voltage of p-channel MFISFETs were about 1.0 and -2.1V, respectively. It was also observed that the current difference between the $I_{ON}$(on current) and $I_{OFF}$(off current) that is very important in sensing margin, is more that 100 times in $I_{D}-V_{G}$ hysteresis curve.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.8 no.3
• /
• pp.251-263
• /
• 2008

In this paper, we report an analytical modeling and 2-D Synopsys Sentaurus TCAD simulation of ion implanted silicon carbide MESFETs. The model has been developed to obtain the threshold voltage, drain-source current, intrinsic parameters such as, gate capacitance, drain-source resistance and transconductance considering different fabrication parameters such as ion dose, ion energy, ion range and annealing effect parameters. The model is useful in determining the ion implantation fabrication parameters from the optimization of the active implanted channel thickness for different ion doses resulting in the desired pinch off voltage needed for high drain current and high breakdown voltage. The drain current of approximately 10 A obtained from the analytical model agrees well with that of the Synopsys Sentaurus TCAD simulation and the breakdown voltage approximately 85 V obtained from the TCAD simulation agrees well with published experimental results. The gate-to-source capacitance and gate-to-drain capacitance, drain-source resistance and trans-conductance were studied to understand the device frequency response. Cut off and maximum frequencies of approximately 10 GHz and 29 GHz respectively were obtained from Sentaurus TCAD and verified by the Smith's chart.