• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2007년도 추계학술대회 논문집
• /
• pp.410-411
• /
• 2007

To investigate the ZnO LED which are interested in the next generation of short wavelength LEDs and Lasers, the ZnO thin films were deposited by RF magnetron sputtering system. The p-type ZnO thin film, fabricated by means of the ampoule-tube method, was used to make the ZnO p-n junction, and its characteristics was analyzed. The ampoule-tube method was used to make the p-type ZnO based on the As diffusion, and the hall measurement was used to confirm that the p-type is formed. the current-voltage characteristics of the ZnO p-n junction were measured to confirm the rectification characteristics of a typical p-n junction and the low leakage voltage characteristics. Analysis of ZnO LED V-I curve will provide a very useful technology for producing the UV ZnO LED and ZnO-based devices.

• 한국진공학회지
• /
• 제20권1호
• /
• pp.50-56
• /
• 2011

본 논문에서는 버퍼막 두께 및 열처리 온도에 따른 ZnO/b-ZnO/p-Si(111) 기반 이종접합 다이오드 전류 특성에 대한 연구가 진행되었고, b-ZnO (ZnO buffer layer) 버퍼막 두께 및 열처리 온도에 따른 p-Si(111) 기판 위에 증착시킨 ZnO 박막의 구조적, 전기적 특성 또한 연구되었다. X-ray diffraction (XRD) 방법을 이용하여 ZnO 박막의 구조적 특성을 측정하였고, semiconductor parameter analyzer를 이용하여 ZnO/b-ZnO/p-Si(111) 이종접합 다이오드의 I-V 특성을 평가하였다. XRD 분석 결과 버퍼막 열처리 온도 $700^{\circ}C$, 버퍼막 두께 70 nm에서 ZnO 박막은 우세한 (002) 방향의 c-축 배향성을 갖는 육방정계(hexagonal wurtize) 결정 구조를 나타내었다. 전기적 특성인 운반자 농도, 비저항 값의 경우에는 버퍼막 열처리 온도 $700^{\circ}C$, 버퍼막 두께 50 nm에서 우수한 전기적 특성(비저항: $2.58{\times}10^{-4}[{\Omega}-cm]$, 운반자 농도: $1.16{\times}10^{20}[cm^{-3}]$)을 보였다. 또한 ZnO/b-ZnO/p-Si(111) 이종접합 다이오드의 전류 특성은 버퍼막 열처리 온도 $700^{\circ}C$에서 버퍼막 두께가 증가할수록 전류 특성이 향상되는 경향을 보였다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 추계학술대회 논문집 Vol.14 No.1
• /
• pp.126-129
• /
• 2001

A p-n junction was obtained by the deposition of an n-type ZnO thin film on a p-type Zn-doped InP substrate. The Zn-doped InP substrate has been made by the diffusion of Zn with sealed ampoule technique. The ZnO deposition process was performed by pulsed laser deposition (PLD). The p-n junction was formed and showed a typical I-V characteristic. We will also discuss about the realization of an ultraviolet light-emitting diode (LED). The structure of n-ZnO/p-Zn-doped InP could be a good candidate for the realization of an ultraviolet light-emitting diode or an ultraviolet laser diode.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 추계학술대회 논문집
• /
• pp.126-129
• /
• 2001

A p-n junction was obtained by the deposition of an n-type ZnO thin film on a p-type Zn-doped InP substrate. The Zn-doped InP substrate has been made by the diffusion of Zn with sealed ampoule technique. The ZnO deposition process ws performed by pulsed laser deposition (PLD). The p-n junction was formed and showed a typical I-V characteristic. We will also discuss about the realization of an ultraviolet light-emitting diode (LED). The structure of n-ZnO/p-Zn-doped InP could be a good candidate for the realization of an ultraviolet light-emitting diode or an ultraviolet laser diode.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2007년도 하계학술대회 논문집 Vol.8
• /
• pp.55-56
• /
• 2007

The p-type ZnO thin film, fabricated by means of the ampoule-tube method, was used to make the ZnO p-n junction, and its characteristics was analyzed. The ampoule-tube method was used to make the p-type ZnO based on the As diffusion, and the hall measurement was used to confirm that the p-type is formed. the current-voltage characteristics of the ZnO p-n junction were measured to confirm the rectification characteristics of a typical p-n junction and the low leakage voltage characteristics. Using the ampoule-tube to fabricate the p-type ZnO will provide a very useful technology for producing the UV ZnO LED and ZnO-based devices.

• 한국결정성장학회지
• /
• 제1권2호
• /
• pp.94-103
• /
• 1991

ZnO함량이 45~60mol%인 ZnO-$P_2O_5$계 유리를 $1200^{\circ}C$에서 용융한 후 열처리하여 결정화시켰다. 기초유리와 결정화시킨 시료의 기계적 성질, 전기적 성질 등을 X선 회절, FTIR, 밀도, 열팽창, 전기전도도, 미세경도 등을 측정하여 검토하였다. X선 회절분석 결과 ZnO의 함량이 45~55mol%인 결정화 유리에서는 주결정상이 메타인산아연[$Zn(PO_3)_2$]이었으며ZnO가 60mol%인 시료는 피로인산아연($Zn_2P_2O_7$)으로 나타났다. 열팽창계수와 직류전기전도도는 ZnO가 50~60mol%인 시료에서 결정상 방향에 따라 각기 다른 값을 나타났으며 이는 배향성 결정상이 존재함을 시사한다.

• Asian-Australasian Journal of Animal Sciences
• /
• 제33권6호
• /
• pp.992-1001
• /
• 2020

Objective: This study was conducted to investigate the effects of hot-melt extruded ZnO nano-particles (HME-ZnO) as an alternative for P-ZnO on growth performance, nutrient digestibility, Zn bioavailability, intestinal microbiota, and intestinal morphology of weanling pigs. Methods: A total of 450 piglets (Landrace×Yorkshire×Duroc) were randomly allotted to five treatments based on initial body weight and sex. The experimental diets were fed in a meal form as phase 1 from d 0 to 14 and phase 2 from d 15 to 28. Treatments were the control diet without ZnO supplementation, the diet containing 2,500 ppm Zn as ZnO, and three diets containing 500, 1,000, or 2,500 ppm Zn as HME-ZnO. Results: The overall result showed a higher (p<0.01) average daily gain in weanling pigs fed ZnO-supplemented diets in comparison to the control diet. There was a decrease (p<0.01) in fecal score in the ZnO-supplemented diets. Dietary supplementation of ZnO improved (p<0.05) crude protein digestibility. The weanling pigs fed the P-ZnO diet had a lower (p<0.01) Zn digestibility in the feces than HME-ZnO supplemented treatments. Weanling pigs fed diets supplemented with ZnO had greater (p<0.05) Lactobacillus spp. populations and lower Clostridium spp. (p<0.05) and Coliforms (p<0.01) populations in the ileum. Weanling pigs fed diets supplemented with increasing concentrations of HME-ZnO linearly decreased Clostridium spp. (p<0.05) and Coliforms (p<0.01) in the ileum. Lower (p<0.05) Clostridium spp. and Coliforms counts in the colon were observed in pigs fed with ZnO-supplemented diets. Weanling pigs fed diets supplemented with ZnO showed a greater (p<0.01) villus height in the duodenum. Conclusion: Dietary supplementation of HME-ZnO and P-ZnO showed a potential to improve the digestibility of protein, intestinal Coliform and Clostridium, villus height in duodenum and ileum. Moreover, HME-ZnO showed a higher Zn digestibility compared with P-ZnO.

• Transactions on Electrical and Electronic Materials
• /
• 제9권1호
• /
• pp.24-27
• /
• 2008

ZnO has intensively attracted interest for the next generation of short wavelength LEDs and semiconductor lasers. However, for the development and application of the devices based on this material, the fabrication of p-type ZnO thin films is pivotal. Generally, the process of preparation of ZnO is unavoidably accompanied by the natural donor ions such as interstitial Zn ions and oxygen vacancy ions that show n-type electrical property and make fabrication of p-type ZnO to be a hard problem. On this study, to realize stable high-quality p-type ZnO thin films, the undoped ZnO thin films were diffused with P in vapor state. The ZnO:P thin films showed high-quality p-type properties electrically and optically.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2006년도 추계학술대회 논문집 Vol.19
• /
• pp.145-146
• /
• 2006

The most Important research topic in the development of ZnO LED and LD is the production of p-type ZnO thin film that has minimal stress with outstanding stoichiometric ratio. In this study, Phosphorus diffused into the undoped ZnO thin films using the ampoule-tube method for the production of p-type znO thin films. The undoped ZnO thin films were deposited by RF magnetron sputtering system on $GaAs_{0.6}P_{0.4}$/GaP and Si wafers. 4N Phosphorus (P) was diffused into the undoped ZnO thin films in ampoule-tube which was performed and $630^{\circ}C$ during 3hr. We found the diffusion condition of the conductive ZnO films which had p-type properties with the highest mobility of above 532 $cm^2$/Vs compared with other studies PL spectra measured at 10K for the purpose of analyzing optical properties of p-type ZnO thin film showed strong PL intensity in the UV emission band around 365nm ~ 415nm and 365nm ~ 385nm.

• 한국결정성장학회지
• /
• 제14권6호
• /
• pp.277-280
• /
• 2004

p형 ZnO 에피 박막을 사파이어 기판의 (0001)면 상에 RF-DC magnet co-sputtering 법으로 성장시켰다. 약 120nm두께의 단결정상 박막을 성공적으로 얻어내었다. p형 ZnO를 만들기 위해서 Al 금속 타켓을 이용하여 DC 스퍼터링으로 $400^{\circ}C$와 $600^{\circ}C$에서 ZnO를 rf magnetron sputtering으로 증착하고, 동시에 Al의 doping을 행하였으며, 성장된 박막의 결정성과 광특성에 대하여 고찰하였다.