• Transactions of the Korean hydrogen and new energy society
• /
• v.30 no.6
• /
• pp.629-634
• /
• 2019

Dicyclopentadiene is a low viscosity resin which forms a poly-dicyclopentadiene rapidly through ring opening metathesis polymerization (ROMP). This poly-dicyclopentadiene has outstanding properties of low-temperature, water and impact resistances. Due to these advantages, military and offshore structures try to apply the DCPD composites by using liquid composite molding process. In this study, 14%, 38% volume fraction fiber glass strand mat reinforced p-DCPD composites processed by structural reaction injection molding (S-RIM) which has resin-catalsyt mixing head and glass fiber preform in the mold. Additionally, S-RIM numerical analysis was conducted to predict the process time depending on fiber volume fraction and mold temperature. The process time is shorter when it has the lower fiber volume fraction or the higher mold temperature. At higher mold temperature, it is necessary to set the maximum mold temperature considering the resin curing time.

• Journal of Power System Engineering
• /
• v.19 no.5
• /
• pp.86-92
• /
• 2015

p-DCPD were prepared by in-suit ROMP polymerization using $MoCl_5$ and $Et_2AlCl$. The results showed that $MoCl_5:Et_2AlCl:DCPD$ mole ratio of 1:2.0:350 had the curing-time of 60sec and crosslinking degree of 90.44%. The curing time of DCPD polymerization by $MoCl_5/Et_2AlCl$ was shortened, and monomer conversion and crosslinking degree were decreased with temperature and the number of moles of $MoCl_5$ and $Et_2AlCl$. $MoCl_5$ and $Et_2AlCl$ is damaged its function by the reaction with the air in the atmosphere and did't proceed the polymerization properly.

• Composites Research
• /
• v.29 no.4
• /
• pp.216-222
• /
• 2016

Ring-opening metathesis polymerization of p-dicyclopentadiene (DCPD) can be performed using the tungsten type catalyst. This reaction usually progresses in nitrogen condition, because the catalysts are extremely sensitive in air condition. To solve this problem, DCPD resin with tungsten (W) was cured using hot press after stirring of DCPD A and B liquid in air condition. Mechanical properties of DCPD were improved by reducing microvoid occurrence successfully by using hot press method. It might be because hot press could provide sufficient press on DCPD specimen. Addition of catalyst was not effective for the curing of resin in a short time. During polymerization, pressure and temperature had a great influence on the mechanical properties of DCPD.

• Elastomers and Composites
• /
• v.38 no.4
• /
• pp.342-353
• /
• 2003

This work is about the development of jet-fuel resistant PVC sealant using a polyester plasticizer. PVC copolymer was compounded with adipic acid glycol(Songcizer P-3000) or DOP plasticizers. Fuel-immersed and non-immersed penetration, solubility, flow, and elongation by tensile adhesion of PVC compounds were measured. Penetration increase by fuel immersion and solubility of PVC compounds with adipic acid glycol polyester plasticizer were smaller than those of PVC compounds with DOP plasticizer. Elongation by tensile adhesion test of PVC compound containing 500 phr of Songcizer P-3000 decreased proportionally to the content of DCDP (dicyclopentadiene) base petroleum resin adhesion promoter. Calcium carbonate($CaCO_3$) filler inhibited the diffusion of fuel in all the PVC compounds and decreased the solubility of PVC compounds containing Songcizer P-3000.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2003.04a
• /
• pp.169-172
• /
• 2003

Manufacturing process for autonomic microcapsules was introduced and autonomic microcapsules were manufactured by varying with various manufacturing process variables. Urea-formaldehyde resin was used for the wall of microcapsules and DCPD (dicyclopentadiene) was used for the self-healing agent. The characteristics of these microcapsules was evaluated through a particle size analyaer, an optical microscope, and a TGA. The various manufacturing process variables, such as pH and agitation speed of the emulsified solution, were considered to focus in this study. According to the results, the particle size distributions were affected on the agitation speed of the emulsified solution, and the thermal stability was influenced by pH of the emulsified solution.

• Proceedings of the Korea Society of Environmental Toocicology Conference
• /
• 1996.12a
• /
• pp.63-63
• /
• 1996

We performed chromosomal aberration assay in Chinese Hamster Lung (CHL) cells in vitro to evaluate theclastogenicity of 11 synthetic chemicals which were listed in Toxicity Evaluation Program of Ministry of Environment of Republic of Korea in 1996. All of the chemicals were carried out MTT assay to determine the 50% cell growth inhibition concentration. All compounds were tested with and without metabolic activation system. Benzoyl chloride revealed positive result at $43\;\mu\textrm{g}/m{\ell}$ in the presence of metabolic activation system, and at 30.8, 61.5 and $123\;\mu\textrm{g}/m{\ell}$ in the absence of metabolic activation system. And p-phenoxy ethanol was observed as positive with the metabolic activation system, but negative without metabolic activation system. Especially 2-propyn-l-ol showed high frequency of pulverization and showed critical difference of cytotoxicity between with and without S9 mixture. Pulverizatiuon is not included in the frequency of structural aberration in our criteria. Dicyclopentadiene, methacrylic acid, aa-dimethylbenzyl hydroperoxide, benzylbutyl phthalate, and p-chlorophenal were revealed negative results.esults.

• Composites Research
• /
• v.29 no.5
• /
• pp.282-287
• /
• 2016

p-DCPD (poly dicyclopentadiene) is the resin that the versatile mechanical properties can be changeable via the control of inner monomer and catalysts. In this work, to improve the strength of composites, surface treated MGF (milled glass fiber) was used as an reinforcement in p-DCPD by molybdenum (Mo) catalyst matrix. The optimum concentration of surface treatment was obtained and the cohesion of MGF themselves increased with concentration. In case of 0.2 wt% silane concentration, the maximized mechanical properties of MGF/p-DCPD composite exhibited because of minimized MGF cohesion. When butyl silane showing minimizing cohesion was used as the optimized alkyl length, high tensile and flexure strength exhibited due to the steric hindrance effect among MGFs. Mechanical and their fractured surfaces of MGF/p-DCPD composites was compared for 4 different chemical functional groups. Norbornene functional groups containing similar chemical structure to DCPD matrix exhibited higher interfacial adhesion between MGFs and DCPD matrix.

• Composites Research
• /
• v.30 no.2
• /
• pp.138-144
• /
• 2017

Damage sensing of polymer composite films consisting of poly(dicyclopentadiene) p-DCPD and carbon nanotube (CNT) was studied experimentally. Only up to 1st ring-opening polymerization occurred with the addition of CNT, which made the modified film electrically conductive, while interfering with polymerization. The interfacial adhesion of composite films with varying CNT concentration was evaluated by measuring the wettability using the static contact angle method. 0.5 wt% CNT/p-DCPD was determined to be the optimal condition via electrical dispersion method and tensile test. Dynamic fatigue test was conducted to evaluate the durability of the films by measuring the change in electrical resistance. For the initial three cycles, the change in electrical resistance pattern was similar to the tensile stress-strain curve. The CNT/p-DCPD film was attached to an epoxy matrix to demonstrate its utilization as a sensor for fracture behavior. At the onset of epoxy fracture, electrical resistance showed a drastic increase, which indicated adhesive fracture between sensor and matrix. It leads to prediction of crack and fracture of matrix.

• Composites Research
• /
• v.31 no.2
• /
• pp.57-62
• /
• 2018

Interfacial and mechanical properties of neat and two sizing agents coated glass fiber (GF)/polydicyclopentadiene (p-DCPD) composites were evaluated at room and low temperatures, $25^{\circ}C$ and $-20^{\circ}C$. Sizing agents of GFs were extracted using acetone and compared via FT-IR. Surface energy and work of adhesion between GFs and p-DCPD were calculated by dynamic contact angle measurement. Mechanical properties of different GFs were determined using single fiber tensile test and interfacial properties of single GF reinforced DCPD strip were determined using cyclic loading tensile test. Mechanical properties of GFs/p-DCPD composites at room and low temperatures were determined using tensile, compressive, and Izod impact tests. Interfacial and mechanical properties were different with sizing agents of GFs and the optimized condition of sizing agent was found.

• Composites Research
• /
• v.16 no.2
• /
• pp.54-61
• /
• 2003

In this study, manufacturing process for microcapsules with the self-healing agent was introduced and the characteristics of microcapsules manufactured by varying with various manufacturing process variables were evaluated through a particle size analyzer, an optical microscope, and a TGA. Urea-formaldehyde resin was used for the thin wall of microcapsules and DCPD (dicyclopentadiene) was used for the self-healing agent. The various manufacturing process variables, such as (1) 24hr, 40hr, 48hr, 60hr of the solution time of the EMA copolymer, (2) pH3.5, pH4.0, pH4.5 of the hydrogen ion concentration of the emulsified solution, (3) 400rpm, 500rpm, 600rpm, 1000rpm of the agitation speed of the emulsified solution, (4) $50^{\circ}$, $55^{\circ}$, $60^{\circ}$ of the reaction temperature of the emulsified solution, were considered. According to the results, the particle size distribution of microcapsules was affected on the agitation speed, and the thermal stability of microcapsules was influenced by the solution time of the EMA copolymer, the hydrogen ion concentration, and the reaction temperature of the emulsified solution. Therefore, suitable manufacturing process variables should be applied to obtain thermally stable microcapsules capable of containing the healing agent capable until the thin wall of microcapsules were to be burned.