• 한국물환경학회지
• /
• 제21권1호
• /
• pp.1-6
• /
• 2005

The effect of ozone oxidation on biodegradability of leachate was studied. Ozone oxidation process was used as pre-treatment process to enhance performance of biological process in treating landfill leachate. Optimum ozone dosing rate and contact time in this experiment was $160mg\;O_3/L$ hr and 45 minutes, respectively. Biodegradability was enhanced 5.08% by ozone oxidation. The ratio of ozone demand/DOC concentration was $0.049{\sim}0.091mg\;O_3/mg$ DOC. The increase of biodegradability depending on ozone dosing rate(D) and contact time(T) can be expressed as follows ; ${\Delta}E=0.00479{\cdot}D^{0.773}{\cdot}T^{0.800}$ The biodegradation rate of DOC was increased proportionally with the increase of ozone dosing rate and contact time irrespective of landfill site age. The increase of biodegradability by ozone addition was not satisfactory. It is hard to expect significant increase in biodegradability by ozone treatment only. Thus, it is evaluated that ozone oxidation can not increase biodegradability significantly in concentrated wastewater composed of complex organic compound such as leachate.

• 한국식품저장유통학회지
• /
• 제8권4호
• /
• pp.379-384
• /
• 2001

오존수 처리콩나물의 저장 중 품질변화를 조사하였다. 콩나물 재배 중 오존수 처리는 콩의 수침시와 주수시에 물을 사용한 것(W/W), 수침 시만 오존수를 처리한 것 (O/M), 주수 시에만 오존수를 처리한 것 (W/O), 수침시와 주수시에 각각 처리한 것(O/O)으로 나누어 각각 5일간 재배하였다. 저장은 콩나물을 0.01 mm polyethylene film 에 포장하여 1$0^{\circ}C$와 2$0^{\circ}C$에서 저장하였다. 저장수명은 오존수 처리와 무처리간의 뚜렷한 차이를 보이지 않았으며 1$0^{\circ}C$에서는 4일, 2$0^{\circ}C$에서는 2일이였다. 총 균수는 1$0^{\circ}C$에서 저장한 경우는 오존수 처리구에서 낮은 경향을 보였으나 2$0^{\circ}C$의 경우는 오존수 처리구에서 오히려 증식율비 놓았다. 저장중 수분, vitamin C 및 chlorophyll 함량은 뚜렷한 차이를 보이지 않았다. 콩나물의 경도는 O/W 및 W/O 처리구에서 대조구 보다 높은 값을 나타내었다. 관능검사의 의하여 평가된 색상, 냄새 및 종합적인 기호도는 O/W에서 가장 양호하였다.

• 자연과학논문집
• /
• 제10권1호
• /
• pp.103-109
• /
• 1998

본 연구는 오존의 강한 산화력을 이용하여 기상의 처리방법에 따른 비스코스 레이온의 탈색효과를 연구하였다. 오존이 발생할 때는 기체상태로 고농도이지만, 수용액 상태로 물에 녹이는 과정에서 기화요인에 의하여 오존의 손실이 많았다. 따라서 기존의 오존처리방법인 수용액상태의 처리방법이 아니라 기상의 오존을 직접 직물에 처리하므로 고농도의 오존을 단시간동안 처리하여 직물에 존재하는 색소를 산화시켜 탈색하는 방법을 사용하였다. 기상의 오존은 직접 유기색소와 반응하지 않기 때문에 물을 매개체로 하여 pick up ratio를 60%, 50%, 40%, 30%, 20%로 변화시키면서 비스코스 레이온의 탈색에 대하여 연구하였다. Pick up ratio가 40%일 때가 유기색소를 분해하는데 필요한 최적의 수산기가 발생하므로 처리포의 탈색효과가 가장 좋았다. 그러나 처리기간이 길수록 너무 과다하게 오존에 의해 산화되므로 강도와 신도의 저하를 초래하였다. 따라서 최적의 기상오존 처리시간은 60분정도에서 처리하는 것이 강도와 신도의 저하를 가장 적게 할 수 있고 백도도 향상시킬 수 있는 것으로 사료된다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제34권3호
• /
• pp.383-390
• /
• 2010

This study is currently giving priority to developing the ship's ballast water treatment system using ozone (Ozone BWTS). The Ozone BWTS was tested in a full scale land-based mobile barge to evaluate performance according to the IMO G8 Guidelines. Test cycles using the mobile-barge were conducted in seawater and brackish water in the vicinity of the Port of Busan and Nakdong River, Republic of Korea. All tests were conducted according to the requirements of the G8 Guidelines. Test results show that the Ozone BWTS meets the Ballast Water Performance Standard contained in Regulation D-2 of the IMO Ballast Water Management Convention, as well as all of the operational, safety, and environmental testing requirements of the G8 Guidelines, as required for type approval of IMO. The study results show that the Ozone BWTS is capable of meeting the Ballast Water Performance Standard under Regulation D-2 of the International Convention for the Control and Management of Ships’ Ballast Water and Sediments, and also the more stringent standards being proposed under US legislation.

• 한국물환경학회지
• /
• 제21권3호
• /
• pp.267-273
• /
• 2005

Dye wastewater generally contains strong color and non-biodegradable materials. Therefore, the conventional wastewater treatment plant can hardly meet the regulation of wastewater effluent water. In this study, a pilot plant of the conventional process followed by advanced oxidation process (AOP), was set up to treat the dying wastewater. The treatment efficiencies on the various candidate processes, such as ozone alone, UV alone, ozone/UV, $ozone/H_2O_2$, $H_2O_2/UV$ and $ozone/UV/H_2O_2$, were investigated in the various ozone and $H_2O_2$ doses. As the results, the $ozone/H_2O_2$ process, among the tested processes, showed the highest efficiency for removing color and $COD_{Cr}$. For color removal, the ozone alone process was enough without combining UV or $H_2O_2$. No significantly enhanced efficiency for removing color and $COD_{Cr}$ by UV irradiation was observed because of the very low transmittance of UV light in dye wastewater.

• 한국물환경학회지
• /
• 제20권2호
• /
• pp.170-175
• /
• 2004

The purpose of this study was to monitor bacteria present in raw water and to investigate the effect of ozone, UV and combined ozone/UV processes for inactivating bacteria. Both polymerase chain reaction (PCR)-fragment length polymorphic analysis (PRA) and PCR-sequence analysis (PSA) were applied for the simultaneous analysis of numerous bacteria species present in each tested water, such as drinking water (DRW), drinking water source (DRWS) and sewage effluent water (SEW). According to the result, the number of detected bacteria species was zero in DRW, 58 in DRWS and 13 in SEW. After treatment of the each process, the ozone/UV process was the most successful for inactivating almost all bacteria. However, it was found that Flavobacterium sp., Pseudomonas sp. and Beta proteobacterium sp. had strong resistant to all tested processes, requiring further detailed study.

• 조명전기설비학회논문지
• /
• 제29권3호
• /
• pp.54-60
• /
• 2015

There are 5 purification plants with the adopted advanced water purification treatment process in Korea. Annual operating costs were 8,990 million won including purchase cost of oxygen and power usage charges. We need research to optimize, in the future, when considering the direction of domestic water treatment continues to adopt advanced water treatment process. In this paper, calculate the optimal operating costs by injected the oxygen gas, used power cost. approximately 25% of the operating costs can be reduced when injected the ozone gas is 1.0ppm than 2.0ppm, the necessary amount of oxygen is increased then power is lower. so operating costs are decided according to oxygen costs. On the other hand, high ozone concentration 2.0ppm, the necessary power is increased then amount of oxygen is lower. Therefore, in the case of G purification plant, the controlling factor of the input ozone concentration 2ppm, PID control operation by setting the concentration of over 10Wt% is efficient. The installed capacity is the more little the more better when considering on Ozone injection rate in the process of water treatment.

• The Journal of Advanced Prosthodontics
• /
• 제8권4호
• /
• pp.290-295
• /
• 2016

PURPOSE. The aim of this study was to evaluate the effect of paracetic acid (PAA) and ozone disinfection on the tensile bond strength (TBS) of silicone-based resilient liners to acrylic resins. MATERIALS AND METHODS. One hundred and twenty dumbbell shaped heat-polymerized acrylic resins were prepared. From the mid segment of the specimens, 3 mm of acrylic were grinded off and separated parts were reattached by resilient liners. The specimens were divided into 2 control (control1, control7) and 4 test groups of PAA and ozone disinfection (PAA1, PAA7, ozone1 and ozone7; n=10). While control groups were immersed in distilled water for 10 min (control1) and 7 days (control7), test groups were subjected to PAA (16 g/L) or ozone rich water (4 mg/L) for 1 cycle (10 min for PAA and 60 min for ozone) per day for 7 days prior to tensile tests. Measurements of the TBS were analyzed using 3-way ANOVA and Tukey's HSD test. RESULTS. Adhesive strength of Mollosil decreased significantly by application of ozone disinfection. PAA disinfection had no negative effect on the TBS values of Mollosil and Molloplast B to acrylic resin. Single application of ozone disinfection did not have any negative effect on TBS values of Molloplast B, but prolonged exposure to ozone decreased its adhesive strength. CONCLUSION. The adhesion of resilient liners to acrylic was not adversely affected by PAA disinfection. Immersion in ozonated water significantly decreased TBS of Mollosil. Prolonged exposure to ozone negatively affects adhesion of Molloplast B to denture base materials.

• 대한전자공학회논문지SD
• /
• 제41권12호
• /
• pp.13-19
• /
• 2004

반도체 또는 평판디스플레이 제조에 있어 노광공정 후의 PR(photo-resist) 제거 공정으로서 기존의 황산기반 용액을 대체하는 고농도 오존 수 생성 기술에 대한 연구를 수행하였다. 세라믹 연면방전구조의 오존발생장치를 개발하여, 0.5［ℓ/min］의 산소 유량에서 최대 12［wt%］이상의 오존가스 농도를 얻었으며, 이를 고농도로 물과 혼합하기 위한 고효율 오존접촉장치를 개발하였다. 오존 수 생성 실험 결과, 오존가스 10［wt%］에서 80［ppm］이상의 오존 수 농도를 달성하였으며, 70［ppm］의 오존 수에서 PR 제거율 147［nm/min］의 양호한 결과를 얻었다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제34권3호
• /
• pp.391-398
• /
• 2010

This study is currently giving priority to developing the ballast water treatment system using ozone(Ozone BWTS). The Ozone BWTS, were equipped on the real merchant vessel named as M. V. Hyundai Hong Kong to carried out shipboard tests of ballast water treatment system in accordance with orders of IMO G8 Guidelines. The study results show that the Ozone BWTS is capable of meeting the Ballast Water Performance Standard under Regulation D-.2 of the International Convention for the Control and Management of Ships’ Ballast Water and Sediments, and also the more stringent standards being proposed under US legislation.