• Journal of the Korean Society for Heat Treatment
• /
• v.19 no.1
• /
• pp.30-36
• /
• 2006

Fretting fatigue behavior of SCM420 steel commonly used in the automotive industry for structural applications was investigated in this study. In addition, the effect of bridge pad on the fretting fatigue test was evaluated from different pad materials and following conclusions were drawn. Simple fatigue limit of SCM 420 steel was determined to be 350 MPa while this value was 225 MPa and 285.5 MPa with SCM420H and with SM45C pad, respectively. Reduction in fatigue limit was, thus found to be 35.7% and 17.9% with SCM 420H pad and SM45C pad, respectively. Results of fracture surface observation revealed that typical striation pattern of fatigue failure existed as well as dimpled and cleavage frature appearance was found in final fractured region. From the EDS compositional analysis, test sample and pad part all had high signals for oxygen and iron, suggesting that worn particles might be iron oxide, although exact chemical composition has to be confirmed. Considerable reduction in fatigue life was apparent in SCM 420 steel under fretting fatigue against simple fatigue. Such reduced fatigue life by fretting damage should be considered as an important factor not only in the viewpoint of repairing but also inevitably in the design stage of structural components.

• Journal of the Korean Applied Science and Technology
• /
• v.30 no.4
• /
• pp.754-760
• /
• 2013

We investigated an electrochemical properties for Langmuir-Blodgett (LB) monolayer films of sphingomyelin(SP) and polyamic acid(PAA) mixture(1:1, 2:1 and 3:1 molar ratio). LB monolayer films of mixture was deposited by the LB method on the indium tin oxide(ITO) glass. The electrochemical properties measured by cyclic voltammetry with three-electrode system in 0.1N $KClO_4$ solution. As a result, LB monolayer films of SP and PAA mixture was appeared on irreversible process caused by the reduction current from the cyclic voltammogram. Diffusion coefficient(D) in the SP and PAA mixture was calculated $2.670{\times}10^{-5}$, $3.562{\times}10^{-5}$ and $1.005{\times}10^{-5}cm^2s^{-1}$ at 1:1, 2:1 and 3:1 molar ratio, respectively.

• Journal of the Korean Applied Science and Technology
• /
• v.23 no.2
• /
• pp.137-146
• /
• 2006

We investigated the electrochemical properties for Langmuir-Blodgett (LB) films mixed with fatty acid (8A5H) and phospholipid (DLPE, DMPC, and DPPA). LB films of 8A5H monolayer and 8A5H-phospholipid mixture were deposited using the Langmuir-Blodgett method on the indium tin oxide(ITO) glass. The electrochemical properties measured using cyclic voltammetry with three-electrode system, an Ag/AgCl reference electrode, a platinum wire counter electrode and LB film-coated ITO working electrode at various concentrations(0.1, 0.5, and 1.0 mol/L) of $NaClO_4$ solution. A measuring range was reduced from initial potential to -1350 mV, continuously oxidized to 1650 mV and measured to the initial point. The scan rate was 50, 100, 150 and 200 mV/s, respectively. As a result, LB films of fatty acid and phospholipid (8A5H/DLPE and DPPA) appeared irreversible process were caused by only the reduction current from the cyclic voltammogram and LB film of 8A5H-DMPC mixture was found to be caused by a reversible oxidation-reduction process.

• Resources Recycling
• /
• v.27 no.1
• /
• pp.64-73
• /
• 2018

This study aims to analysis the environmental impact on waste catalyst recycling technology using entire life cycle assessment. Environmental impacts consist of the five categories of impacts: global warming, resource depletion, acidification, eutrophication, and photochemical oxide production. The waste catalyst recycling presently have a GWP 3.53 ton $CO_2$ equivalent/ton, a ADP 0.017 ton Sb equivalent/ton, a AP 0.051 $SO_2$ equivalent/ton, a EP 0.0092 $PO{_4}^{3-}$ equivalent/ton, a 0.0019 ton $C_2H_4$ equivalent/ton. The smelting reduction process is the greatest contributor to all categories of environmental impacts in waste catalyst recycling. Electricity used in the smelting reduction process is the major contributor of all impact categories.

• Journal of Electrochemical Science and Technology
• /
• v.3 no.2
• /
• pp.57-62
• /
• 2012

In this report, we demonstrate that the longitudinal localized surface plasmon resonance mode can be suppressed when the nanorods were in dumbbell shape. The seed nanorods were synthesized by electrochemical deposition of metals into the pores of anodic aluminum oxide templates. The dumbbell-like nanorods were grown from seed Au-Ni-Au nanorods by a rate-controlled seed-mediated growth strategy. The selective deposition of Au atoms onto Au blocks of Au-Ni-Au nanorods produced larger diameter of Au nanorods with bumpy surface resulting in dumbbell-like nanorods. The morphology of nanorods depended on the reduction rate of $AuCl_4^-$, slow rate producing smooth surface of Au nanorods, but high reduction rate producing bumpy surface morphology. Through systematic investigation into the UV-Vis-NIR spectroscopy, we found that the multiple localized surface plasmon resonance (LSPR) modes were available from single-component Au nanorods. And, their LSPR modes of Au NRs with bumpy surface, compared to the smooth seed Au NRs, were red-shifted, which was obviously attributed to the increased electron oscillation pathways. While the longitudinal LSPR modes of smoothly grown Au NRs were blue-shifted except for a dipole transverse LSPR mode, which can be interpreted by decreased aspect ratio. In addition, dumbbell-like nanorods showed an almost disappeared longitudinal LSPR mode. It reflects that the plasmonic properties can be engineered using complex nanorods structure.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.35 no.2
• /
• pp.121-127
• /
• 2011

NOx (Nitrogen Oxide) reduction system periodically needs a rich or stoichiometric operating condition to reduce NOx. A new method that optimizes the control of external HC injection into a diesel exhaust pipe for HC-type LNT (Lean NOx Trap) catalyst system has been developed. In this paper, these catalysts are called HC-LNT catalysts. The concentration and amount of HC can be controlled by controlling the external injection. In this study, we investigated the relationship between the spray behavior of hydrocarbons injected into the transparent exhaust pipe and NOx reduction characteristics. From the results of this experiment, we obtained useful information about the optimum injection and position of HC injector to the exhaust pipe. Further, we obtained useful information about the optimal injection condition for an HC-LNT catalyst system with a gasoline PFI (port fuel injection) typeinjector.

• Particle and aerosol research
• /
• v.15 no.4
• /
• pp.159-171
• /
• 2019

The cap-and-trade system against the air pollutants in the Seoul Metropolitan Area (SMA), Korea has been implemented since 2008 and will be implemented other areas in Korea on 2020. In this study, to identify the outcome and effectiveness of the cap-and-trade system in the SMA, (1) the rate of change for NOx and SOx emissions, (2) differences between the real emission and allocated amount, and (3) the status of trading are reviewed. It was found that the NOx and SOx emissions from the sources under the cap-and-trade system decreased in the SMA but the reduction was mainly due to the reduction of fuel usage not related to the system. It was found that the average percentage of annual emission in the SMA to the allocated amount between 2008 and 2018 was 66.9% for NOx and 69.3% for SOx, respectively. It suggests that there was over allocation of the emission amounts. The average trading prices in the SMA were 0.193 $/kg for NOx and 0.128 $/kg for SOx, far lower than those in RECLAIM, 131.942 $/kg and 81.677 $/kg, respectively. It was suggested that (1) the cap system for NOx and SOx emissions should be implemented only for the area with high emission ratio from large point sources, (2) the trade system is not suitable for the effective implementation of the cap system, and (3) Korean government should not allow over allocation in order to ensure sound market function without delaying the introduction of technology.

• Resources Recycling
• /
• v.7 no.2
• /
• pp.39-45
• /
• 1998

We smelted thc pellets made by mixing the distilled carbon from wlISte Lires, LD converter dust and slag with reduction process in the revcrberatory furnace. Thc obtained results are as follows 1) The removal mte of zinc appears above 97% after T reducing the pellets at $1300^{\circ}C$ for Ihr and the zinc content in the residue are 0.1~D.2%. 2) Under the mixing condition of 500 g LD dust. 150-200 g LD slag and 30-50 g distilled carbon of waste lires the removal raho of zinc shows above 95%, while t the 50-60% Fe remains in the residue. 3) After smelting at $1350^{\circ}C$ for 3hrs, the recovery ratio of pig iron reduced from lhe p pellets containing 15-20% LD slag and 4.1-7.2% distilled carbon of waste tires appears in the range of 89.3-92%. 4) Tbe c chemical composition of the recovered pig iron is 1.7%C, O.05%P, 0.05%S and balance Fe. 5) Tbe recovered dust from the d dust collcctor alter finishing the reduction rcaction appears as a crude zinc oxide conLaining 60% zinc.

• Journal of Powder Materials
• /
• v.12 no.3
• /
• pp.192-200
• /
• 2005

Ultrafine copper powder was prepared from $CuO-H_2O$ slurry with hydrazine, a reductant, under $70^{\circ}C$. The influence of various reaction parameters such as temperature, reaction time, molar ratio of $N_2H_4$, PvP and NaOH to Cu in aqueous solution had been studied on the morphology and powder phase of Cu powders obtained. The production ratio of Cu from CuO was increased with the ratio of $N_2H_4/Cu$ and the temperature. When the ratio of $N_2H_4/Cu$ was higher than 2.5 and the temperature was higher than $60^{\circ}C$, CuO was completely reduced into Cu within 40 min. The crystalline size of Cu obtained became fine as the temperature increase, whereas the aggregation degree of particles was increased with the reaction time. The morphology of Cu powder depended on that of the precursor of CuO and processing conditions. The average particle size was about $0.5{\mu}m$.

• Journal of Physiology & Pathology in Korean Medicine
• /
• v.22 no.2
• /
• pp.422-426
• /
• 2008

In this study, the preventive effects of Radix Trichosanthis extracts (RTE) against cytokine-induced ${\beta}-cell$ death were assessed. Cytokines generated by immune cells infiltrating pancreatic islets are crucial mediators of ${\beta}-cell$ destruction in insulin-dependent diabetes mellitus. The treatment of RIN cells with $interleukin-1{\beta}$ ($IL-1{\beta}$) and $interferon-{\gamma}$ ($IFN-{\gamma}$) resulted in a reduction of cell viability. RTE protected $IL-1{\beta}$ and $IFN-{\gamma}$-mediated viability reduction in a concentration-dependent manner. Incubation with RTE also induced a significant suppression of $IL-1{\beta}$ and $IFN-{\gamma}$-induced inducible nitric oxide synthase (iNOS) protein expression. The molecular mechanism by which RTE inhibited iNOS protein expression appeared to involve the inhibition of $NF{-\kappa}B$ activation. The $IL-1{\beta}$ and $IFN-{\gamma}$-stimulated RIN cells showed increases in $NF{-\kappa}B$ binding activityand $I{\kappa}B{\alpha}$ degradation in cytosol compared to unstimulated cells. However, pretreatment with RTE inhibited cytokines-induced $I{\kappa}B{\alpha}$ degradation and $NF{-\kappa}B$ activation in RINm5F cells. Furthermore, the protective effects of RTE were verified via protection of impairment in glucose-stimulated insulin secretions in $IL-1{\beta}$ and $IFN-{\gamma}$-treated islets.