• 생명과학회지
• /
• 제18권1호
• /
• pp.84-90
• /
• 2008

충청남도 병천면 일대의 6곳의 토양시료를 채취하여 망간을 산화하는 균주들을 순수분리 하고, 이 중 망간 산화능이 가장 우수한 한 균주를 최종 선별하여 본 실험에 사용하였다. 최종 선별된 균주의 생리, 생화학적 특성을 조사하고, 16S rRNA 염기 서열분석 등을 통하여 동정한 결과 최종 선별된 균주는 Pseudomonas sp. MN5로 확인되었다. Pseudomonas sp. MN5은 fructose와 maltose를 제외한 다양한 당을 이용하지 못하였으며, 항생제인 kanamycin, chloramphenicol, streptomycin 그리고 tetracycline에는 높은 감수성을 보이고, 리튬, 망간, 바륨과 같은 중금속에 대해서는 mg/ml 단위의 높은 내성을 나타냈다. 그리고 Pseudomonas sp. MN5의 망간산화 최적 pH는 7.5이고, 망간산화 활성이 proteinase K와 가열처리를 한 시료에서 저해되었다. Pseudomonas sp. MN5가 생성하는 망간산화 단백질을 ammonium sulfate precipitation, HiTrap Q FF ion exchange chromatography 그리고 G3000sw $_{XL}$ gel filtration chromatography를 통해서 정제한 결과, 15 kDa, 46.7 kDa 그리고 63.5 kDa의 세종류의 manganese oxidizing protein가 확인되었고, 내부서 열과 N-말단 서열 분석 결과 Pseudomonas sp. MN5가 생성하는 망간산화 단백질은 외막의 porin 단백질인 것으로 추정되었다.

• 청정기술
• /
• 제14권3호
• /
• pp.204-210
• /
• 2008

비가수분해 솔-젤법에 의하여 여러 가지 조성의 $V_{2}O_{5}-TiO_2$ 촉매를 합성하여 특성분석을 실시하고 황화수소의 선택 산화반응에 대한 촉매성능을 고찰하였다. 이 $V_{2}O_{5}-TiO_2$ 촉매는 높은 표면적을 가지고 VOx가 작은 입자로 잘 분산되어 있었고, 환원성도 우수한 것으로 나타났다. 그러나 12 wt% 이상의 바나디아 담지량부터는 결정성 $V_{2}O_5$가 관찰되어 $H_{2}S$의 전환율을 감소시키는 결과를 초래하였다. 이 방법으로 제조된 $V_{2}O_{5}-TiO_2$ 촉매는 통상의 제로젤(xerogel) 촉매나 함침 촉매에 비해 높은 반응활성을 보여 주었고, 암모니아와 물이 포함된 조건에서도 황화수소를 선택 산화시켜 이산화황을 거의 발생시키지 않고 환경 친화적이고 안전한 물질인 원소 황(sulfur)과 티오황산암모늄(ATS)으로 회수할 수 있었다.

• 상하수도학회지
• /
• 제21권4호
• /
• pp.395-407
• /
• 2007

Disinfection by-products(DBPs) are formed through the reaction between chlorine and natural organic matter(NOM) in water treatment. For reducing the formation of chlorinated DBPs in the drinking water treatment, there is a need to evaluate the behavior of NOM fractions and the occurrence of DBPs for each fraction. Among the six fractions of NOM, the removal of HPOA and HPIN got accomplished through coagulation and sedimentation processes. Advanced water treatment processes were found to be most significant to remove the HPOA and HPON. It was found that HPOA made the most THMFP level than any other fractions and HPIA and HPOA formed higher HAAFP. The fraction of NOM with MW less than 1k Da was 32.5~54.3% in intake raw water. Mostly the organic matter with MW more than 1k Da was removed through coagulation and sedimentation in the drinking water treatment processes. In case of advanced water treatment processes, the organic matter with MW 1k~100k Da decreased by means of ozone oxidation for high molecular weight substances. As the result low molecular organic matter increased. In the BAC and GAC processes, the organic matter with MW less than 100k Da decreased.

• Journal of Information Display
• /
• 제2권3호
• /
• pp.60-65
• /
• 2001

Lateral type poly-silicon field emitters were fabricated by utilizing the LOCOS (Local Oxidation of Silicon) process. For the implementation 'of an ideal field emission device with quasi-zero tunneling barrier, a new and fundamental approach has used conducted by introducing an intelligent carbon-based thin layer on the cathode tip surface via a field-assisted self-aligning of carbon (FASAC) process. Fundamental lowering of the turn-on field for the electron emission was feasible through the control of both the tip shape and surface barrier height.

• 한국재료학회지
• /
• 제12권11호
• /
• pp.845-849
• /
• 2002

Alloys of $Fe_3$Al, $Fe_3$Al-6Cr, $Fe_3$Al-4Cr-1Mo, $Ni_3$Al, and $Ni_3$Al-2.8Cr were oxidized at $1000^{\circ}C$ in air, and the oxide scales formed were studied using XRD. SEM, EPMA, and TEM. The oxide scales that formed on $Fe_3$Al-based alloys consisted primarily of $\alpha$-$Al_2$$O_3$ containing a small amount of dissolved Fe and Cr ions, whereas those that formed on $Ni_3$Al-based alloys consisted primarily of $\alpha$-$Al_2$$O_3$, together with a small amount of $NiAl_2$$O_4$, NiO and dissolved Cr ions. For the entire alloys tested, nonadherent oxide scales formed, and voids were inevitably existed at the scale-matrix interface.

• 한국세라믹학회지
• /
• 제51권5호
• /
• pp.481-486
• /
• 2014

Environmental barrier coatings (EBCs) are used to protect SiC-based ceramics or composites from oxidation and corrosion due to reaction with oxygen and water vapour at high temperatures above $1000^{\circ}C$. Mullite ceramics have been studied for environmental barrier coatings for Si-based ceramics. More recently, rare earth silicate ceramics have been identified as more water vapour-resistant materials than mullite for environmental barrier coatings. In this study, we fabricate mullite and yttrium silicate ceramics by an atmospheric plasma spray coating method using spherical granules fabricated by spray drying. As a result, EBCs with thicknesses in the range of $200-300{\mu}m$ are successfully fabricated without any macroscopic cracks or interfacial delamination. Phase and microstructure analysis are conducted, and the basic mechanical properties, such as hardness and indentation load-displacement curves are evaluated.

• Journal of Forest and Environmental Science
• /
• 제33권1호
• /
• pp.33-38
• /
• 2017

In this study, spray-drying yield and morphological characterization of spray-dried cellulose nanofibril (CNF) and TEMPO-oxidized nanocellulose (TONC) depending on spray-drying condition and surfactant addition was investigated. As spray-drying temperature increased, the yield of spray-dried CNF was increased. The highest spray-drying yields in both nanocelluloses were found at didecyl dimethyl ammonium chloride (DDAC) addition of 2.5 phr at all investigated temperatures. The spray-dried CNF was the sphere-like particle, but the spray-dried TONC showed both rod and sphere-like morphology. The average diameter of spray-dried CNF was decreased with increasing DDAC addition amount, resulting in the increase of specific surface area.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2016년도 제50회 동계 정기학술대회 초록집
• /
• pp.360.2-360.2
• /
• 2016

CuSn thin films were fabricated by rf magnetron co-sputtering method on the Si(100) substrate for evaluation of the antibacterial effect. The co-sputtering process was performed with different rf powers and sputtering times to regulate the thickness of the films and relative atomic ratio of Cu to Sn. The physicochemical properties of the CuSn thin films were characterized by X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), X-ray induced Auger electron spectroscopy (XAES), Optical microscope (OM), 4-point probe, and antibacterial test. An antibacterial test was conducted with Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus) as changing contact times between CuSn fillms and bacteria suspension. We compared to the crystalline structures of films before sterilization and after sterilization by XRD measurement. The changes of oxidation states of Cu and Sn and the chemical environment of films before and after antibacterial test were investigated with high resolution XPS spectra in the regions of Cu 2p, Cu LMM, and Sn 3d. After antibacterial test, the morphology of the films was checked with an OM images. The electrical properties of the CuSn films such as surface resistance and conductivity were measured by using 4-point probe.

• 대한기계학회논문집A
• /
• 제28권10호
• /
• pp.1534-1540
• /
• 2004

This study aims to obtain fundamental understandings involving the manufacturing processes of nano-composites with chemically surface-modified multi-walled carbon nanotubes(MWCNTs), and explore the role of functionalized MWCNTs in the epoxy/MWCNT composites. For this purpose, MWCNTs were purified by the thermo-chemical oxidation process, and incorporated into an epoxy matrix by in situ polymerization process, the surface of MWCNTs were functionalized with carboxyl functions which were demonstrated by an infrared spectroscopy. The mechanical properties of epoxy/MWCNT nano-composites were measured to investigate the role of a chemically functionalized carbon nanotubes. To improve the dispersion quality of MWCNTs in the epoxy matrix, methanol and acetone were exploited as dispersion media with sonification. The epoxy/MWCNT nano-composites with 1 or 2 wt.％ addition of functionalized carbon nanotubes show an improved tensile strength and wear resistance in comparison with pure epoxy, which shows the mechanical load transfer improves through chemical bonds between epoxy and functionalized MWCNTs. The tensile strength with 7 wt.％ functionalized MWCNTs increases by 28％ and the wear resistance is dramatically improved by 100 times.

• 한국재료학회지
• /
• 제19권9호
• /
• pp.481-487
• /
• 2009

The photocatalysts of Fe-ACF/$TiO_2$ compositeswere prepared by the sol-gel method and characterized by BET, XRD, SEM, and EDX. It showed that the BET surface area was related to adsorption capacity for each composite. The SEM results showed that ferric compound and titanium dioxide were distributed on the surfaces of ACF. The XRD results showed that Fe-ACF/$TiO_2$ composite only contained an anatase structure with a Fe mediated compound. EDX results showed the presence of C, O, and Ti with Fe peaks in Fe-ACF/$TiO_2$ composites. From the photocataytic degradation effect, $TiO_2$ on activated carbon fiber surface modified with Fe (Fe-ACF/$TiO_2$) could work in the photo-Fenton process. It was revealed that the photo-Fenton reaction gives considerable photocatalytic ability for the decomposition of methylene blue (MB) compared to non-treated ACF/$TiO_2$, and the photo-Fenton reaction was improved by the addition of $H_2O_2$. It was proved that the decomposition of MB under UV (365 nm) irradiation in the presence of $H_2O_2$ predominantly accelerated the oxidation of $Fe^{2+}$ to $Fe^{3+}$ and produced a high concentration of OH radicals.