• Archives of Plastic Surgery
• /
• v.35 no.5
• /
• pp.574-580
• /
• 2008

Purpose: Philtral deformity is a stigma of secondary cleft lip nose. It occurs from the false arrangement of orbicularis oris muscle and the scar of previous operation. Various methods have been used to correct this deformity. We successfully corrected philtral deformity using overlapping of orbicularis oris muscle flap. Methods: From November 2000 to August 2007, we performed 39 cases of correction of philtral deformity in secondary cleft lip nose with overlapping of orbicularis oris muscle flap. Their age ranged from 5 to 53 years old. Existing scar tissue of previous operation was deepithelialized and preserved as scar flap. Lateral orbicularis oris muscle flap was elevated, advanced and overlapped upon medial muscle flap after dissection of orbicularis oris muscle of both sides. Reconstruction of philtral column was made from overlapping area by fixation of end part of lateral muscle flap to the point between philtral dimple and column. The degree of muscle flap advancement was decided by correction state of lateral muscle bulging. Correction of nostril floor depression or whistle deformity was also performed with preserved scar flap, if necessary. Results: Realignments of orbicularis oris muscle were possible in the majority of the patients and final results of philtral reconstruction were satisfactory mostly. Correction of nostril floor depression and whistle deformity was also achieved. Additional correction was performed later to 4 patients in whom insufficient reconstruction was noted. No significant complication was observed. Conclusion: More natural and symmetric philtrum was acquired with overlapping of orbicularis oris muscle flap. To the authors' knowledge, it is an easy and effective method for correction of philtral deformity through anatomical rearrangement of distorted orbicularis oris muscle with relatively simple procedure.

• The Journal of the Acoustical Society of Korea
• /
• v.34 no.3
• /
• pp.234-239
• /
• 2015

Non-Negative Matrix Factorization (NMF) is a method for updating dictionary and gain in alternating manner. Due to ease of implementation and intuitive interpretation, NMF is widely used to detect and separate overlapping sound events. However, NMF that utilizes non-negativity constraints generates parts-based representation and this distinct property leads to a dictionary containing fragmented acoustic events. As a result, the presence of shared basis results in performance degradation in both separation and detection tasks of overlapping sound events. In this paper, we propose a new method that utilizes K-Singular Value Decomposition (K-SVD) based dictionary to address and mitigate the part-based representation issue during the dictionary learning step. Subsequently, we calculate the gain using NMF in sound event detection step. We evaluate and confirm that overlapping sound event detection performance of the proposed method is better than the conventional method that utilizes NMF based dictionary.

• The KIPS Transactions:PartA
• /
• v.9A no.2
• /
• pp.197-206
• /
• 2002

Many researchers have been interested in the optimization of parallel programs through the latency hiding by overlapping the communication with the computation. We ana1yzed overlapping effects in the circular shift communication which is one of the collective communications being frequently used In many data parallel programs. We measured the time which can be possibly overlapped and the time which cannot be overlapped in over all circular shift communication period on an Ethernet switch-based clustered system. The result from each platform nay be used for the input of optimizing compilers. The previous performance models usually have two kinds of drawbacks one is only based on point-to-point communication, so it is not appropriate for analyzing the overall effects of collective communications. The other provides the performance of collective communication, but no overlapping effect. In this paper we extended the previous models and analyzed the experimental results of the extended model.

• Korean Journal of Optics and Photonics
• /
• v.31 no.3
• /
• pp.125-133
• /
• 2020

An innovative method for separating overlapping latent fingerprints, using laser-induced plasma spectroscopy (LIPS) combined with multivariate analysis, is reported in the current study. LIPS provides the capabilities of real-time analysis and high-speed scanning, as well as data regarding the chemical components of overlapping fingerprints. These spectra provide valuable chemical information for the forensic classification and reconstruction of overlapping latent fingerprints, by applying appropriate multivariate analysis. This study utilizes principal-component analysis (PCA) and partial-least-squares (PLS) techniques for the basis classification of four types of fingerprints from the LIPS spectra. The proposed method is successfully demonstrated through a classification example of four distinct latent fingerprints, using discrimination such as soft independent modeling of class analogy (SIMCA) and partial-least-squares discriminant analysis (PLS-DA). This demonstration develops an accuracy of more than 85% and is proven to be sufficiently robust. In addition, by laser-scanning analysis at a spatial interval of 125 ㎛, the overlapping fingerprints were separated as two-dimensional forms.

• Industrial Engineering and Management Systems
• /
• v.4 no.1
• /
• pp.1-22
• /
• 2005

This paper presents new scheduling heuristics, namely Mean Progressive Weighted Tardiness Estimator (MPWT) Heuristic Method and modified priority rules with sequence-dependent setup times consideration. These are designed to solve job shop scheduling problems with new performance measures - progressive weighted tardiness penalties. More realistic constraints, which are inter-machine overlapping sequence-dependent setup times, are considered. In real production environments, inter-machine overlapping sequence-dependent setups are significant. Therefore, modified scheduling generation algorithms of active and nondelay schedules for job shop problems with inter-machine overlapping sequence-dependent setup times are proposed in this paper. In addition, new customer-based measures of performance, which are total earliness and progressive weighted tardiness, and total progressive weighted tardiness, are proposed. The objective of the first experiment is to compare the proposed priority rules with the consideration of sequence-dependent setup times and the standard priority rules without setup times consideration. The results indicate that the proposed priority rules with setup times consideration are superior to the standard priority rules without the consideration of setup times. From the second experiment and the third experiment to compare the proposed MPWT heuristic approach with the efficient priority rules with setup times consideration, the MPWT heuristic method is significantly superior to the Batched Apparent Tardiness Cost with Sequence-dependent Setups (BATCS) rule, and other priority rules based on total earliness and progressive weighted tardiness, and total earliness and tardiness.

• Bulletin of the Korean Chemical Society
• /
• v.32 no.5
• /
• pp.1519-1526
• /
• 2011

A previous study (Lee, C. W. J. Phys. B 2010, 43, 175002) that isolated the overlapping resonances in the photoionization spectra using multichannel quantum defect theory (MQDT) in systems involving a single open channel was extended to manage many open channels when the closed channels are degenerate. The theory was applied to the dipole allowed J = 1$^{\circ}$ spectra from the ground state with excitation energies lying between the lowest ionization thresholds for rare gas atoms, Ar, Kr, and Xe, and also for group IV elements, Ge, Sn and Pb.

• Journal of applied mathematics & informatics
• /
• v.36 no.1_2
• /
• pp.135-154
• /
• 2018

In this paper, an almost second order overlapping Schwarz method for singularly perturbed third order convection-diffusion type problem is constructed. The method splits the original domain into two overlapping subdomains. A hybrid difference scheme is proposed in which on the boundary layer region we use the combination of classical finite difference scheme and central finite difference scheme on a uniform mesh while on the non-layer region we use the midpoint difference scheme on a uniform mesh. It is shown that the numerical approximations which converge in the maximum norm to the exact solution. We proved that, when appropriate subdomains are used, the method produces convergence of second order. Furthermore, it is shown that, two iterations are sufficient to achieve the expected accuracy. Numerical examples are presented to support the theoretical results. The main advantages of this method used with the proposed scheme are it reduce iteration counts very much and easily identifies in which iteration the Schwarz iterate terminates.

• Proceedings of the Korean Society for Rock Mechanics Conference
• /
• 2011.09a
• /
• pp.3-21
• /
• 2011

Laboratory experiments and numerical simulations using Particle Flow Code (PFC2D) were performed to study the effects of joint separation and joint overlapping on the full failure behavior of rock bridges under direct shear loading. Through numerical direct shear tests, the failure process is visually observed and the failure patterns are achieved with reasonable conformity with the experimental results. The simulation results clearly showed that cracks developed during the test were predominantly tension cracks. It was deduced that the failure pattern was mostly influenced by both of the joint separation and joint overlapping while the shear strength is closely related to the failure pattern and its failure mechanism. The studies revealed that shear strength of rock bridges are increased with increasing in the joint separation. Also, it was observed that for a fixed cross sectional area of rock bridges, shear strength of overlapped joints are less than the shear strength of non-overlapped joints.

• Journal of the Korean Society for Precision Engineering
• /
• v.32 no.12
• /
• pp.1023-1029
• /
• 2015

Laser-assisted machining (LAM) is one of the most effective methods for enhancing the machinability of difficult-to-cut materials, such as titanium alloys and various ceramics, and has been studied by many researchers. LAM is a method that facilitates machining by softening a workpiece using a laser heat source. The advantages of the LAM process are decreases in tool wear, cutting force, and surface roughness. However, when the material is over-heated, melting or burning can occur. This study analyzed the heat source distribution with regard to overlapping of preheating on the laser heating path with an acute angle, a right angle and obtuse angles. Then, a power reduction method was proposed to reduce the melting and burning of the workpiece.

• Journal of the Korean Society for Precision Engineering
• /
• v.13 no.10
• /
• pp.46-55
• /
• 1996

As industrial standard data, the STL format which approximates three dimensional CAD model to triangular facets, is used for RP(Rapid Prototyping) system in recent days. Because most RP system take the only form of two dimensional line segments as an input stream inspite of its imperfectness while converting into STL format, a CAD model is converted into a standard industrial format which is composed of many triangular facets. The error verifying process is composed of four main steps, and these are 1) Remove facets with two or more vertices equal to each other. 2) Fix overlapping error such as more than three facets adjacent to anedge. 3) Fill holes in the mesh by using Delaunay triangulation method. 4) Correct the wrong direction and normal vectors. This paper is concerned with serching the mentioned errors in advance and modifying them.