• 대한화학회지
• /
• 제23권3호
• /
• pp.125-131
• /
• 1979

한 쌍의 slater type orbitals에 대한 two overlap integrals을 계산하는 방법이 Mulliken등에 의하여 발전되었다. 이 방법으로 two center integrals을 계산하기 위해서는 한쌍의 Slater type orbital,에 대한 극좌표들 타원좌표로 변환해야한다. 두 점에 위치한 Slater type orbital을 공통좌표상에 전개시키는 새로운 방법 즉 spherical harmonics의 전개방법이 two center overlap integrals, 을 계산하는데 응용되었다. 이 새로운 방법에서는 Slater type orbitals, 을 기준점에 대해 전개시키는 것이 필요하다. 본 연구에서는 two center overlap integral을 계산하기 위한 spherical harmonics 전개방법을 $|3s{\g}$, $|5s{\g}$및 $|5s{\g}$에 까지 확장시켰다. 이들 원자궤도함수의 전개식을 사용하여 two center overlap integrals의 기본식을 유도하였으며, 이 기본식을 사용하여 가상적인 NO 분자에 대한 two cunter overlap integrals의 계산값이 이미 보고된 값과 일치하였다.

• 전자공학회논문지B
• /
• 제32B권10호
• /
• pp.1280-1285
• /
• 1995

In this paper the optimized overlap driving scheme for improving the reduction problem of the operating voltage range occured by the overlap driving scheme proposed precedently and increasing the contrast ratio of screen image in the simple matrix LCDs is proposed. The characteristic estimation of the proposed method was performed in a condition that the number of scan electrodes was 120 and the threshold voltage of LC pixel was 2V and the overlap rate of scan signal was varied from 0% to 40% . As a result of estimation compared with the overlap driving scheme proposed precedently, this new method was certified as a method which it could increase the operating voltage range of the LC pixel by 16% in 20% overlap condition and it's operating voltage range was also increased very much with the increase of the overlap rate. Consequently this newly proposed method was certified as a method which it could maintain the improvement effect of the operating characteristics obtained by the overlap driving scheme proposed precedently with the big improvement in the contrast ratio of screen image.

• Journal of Power Electronics
• /
• 제18권2호
• /
• pp.615-626
• /
• 2018

To ensure a DC current path and avoid large voltage overshoot of the DC-link inductor, alternating PWM pulses in the current-source rectifier should be supplemented by overlap time, which generates an overlap current and causes input current distortion. In this study, the influence of overlap time is illustrated by comparing the AC-side current before and after overlap time is added. The overlap current distribution caused by overlap time is discussed under different modulation carriers, including triangle carrier, positive-going carrier, and negative-going carrier. The quantitative relationship between the extra harmonics of the AC-side current and overlap time is based on the Fourier analysis. Based on the commutation analysis, a new carrier modulation scheme that can restrain overlap current is proposed. A 3 kW prototype is established to verify the effectiveness of the influence of overlap time and the proposed restraining modulation scheme.

• 대한방사선기술학회지:방사선기술과학
• /
• 제43권3호
• /
• pp.161-167
• /
• 2020

This study aimed to found out the effect of patellofemoral overlap distance by changing femur thickness and center X-ray angles in Merchant method images. Based on the femur thickness, it suggested tube angle minimizes overlap. It was conducted by Merchant method, a knee tangential view, and the image was obtained by changing the thigh thickness from 14 to 20 cm and the center ray angle from 60°, 57°, 55°. The images were measured by five researchers using a method of measuring the overlap, which was designed by them. The results showed at 60°, 57°, 55° angle, the patellofemoral overlap distance resulted in 0.47±0.66 to 20.89±0.65 cm, 2.26±0.28 to 15.73±0.62 cm, 1.39 ± 0.83 to 12.49 ± 0.37 cm. However, for 57° and 55°, no overlap in thickness under 14.5 and 14 to 15.5 didn't appear. it showed high correlation between femur thickness and overlap. The difference in the mean value of overlap in each group showed a statistically significant difference (p<0.01), all were classified as independent groups in the post-hoc test. In all images, the patellofemoral overlap distance increased as the thickness increased, and at the average thickness of Korean men and women, overlap decreased when reducing center ray. When conducting Merchant tests on Koreans, it was suggested it would be useful to use 57° angle because it minimize the effects of overlap and intrusions of tibia.

• 한국대기환경학회지
• /
• 제25권5호
• /
• pp.450-458
• /
• 2009

The range-dependent overlap factor of a lidar system can be determined experimentally if a Raman backscatter signal by molecule is measured in addition to the usually observed elastic backscatter signal, which consists of a molecular component and a particle component. The direct determination of the overlap profile is presented and applied to a lidar measurement according to variation of telescope field-of-view and distance between telescope and transmitting laser. The retrieval of extinction coefficient by Raman method can generate high errors for heights below planetary boundary layer if the overlap effect is ignored. The overlap correction method presented here has been successfully applied to experimental data obtained in Gwangju, Korea.

• 한국음향학회지
• /
• 제19권8호
• /
• pp.35-46
• /
• 2000

본 논문은 부밴드별 반향제거 필터 뱅크를 구현하기 위한 가중 Overlap-add 적응필터를 이용한 단일 채널 음향 반향제거기를 제안한다. 기준 입력 신호의 고유치 분포율에 의존하여 수렴특성이 결정되는 NLSM (Normalize US)알고리즘을 사용하여 전대역 처리 과정에서 발생하는 수렴 성능의 저하를 방지하고, 효율적인 블록 병렬처리가 가능한 부밴드 처리기법인 가중 Overlap-add 방식을 적용한 적응 반향제거기의 성능을 고찰한다. 또한 본 논문에서는 동시 통화 검출을 위한 전용 필터와 에너지 비교 방법을 동시에 사용하는 새로운 형태의 동시통화 검출 기법을 제안한다. 모의 실험을 통해 제안한 적응 반향 제거기와 동시 통화 검출기의 효과적인 근단 화자 검출 방법을 보인다.

• 대한화학회지
• /
• 제22권3호
• /
• pp.117-127
• /
• 1978

두점 A와 B에 위치한 Slater원자궤도함수의 spherical harmonics부와 지름부를 기준점 A를 중심으로 전개하여 공통좌표상에 기술하였다. 이 Slater 원자궤도함수의 전개식을 사용하여 two center overlap integral의 기본식을 유도하였으며 이 기본식을 이용하여 $CH_4,\;H_2O,\;NH_3,\;C_2H_6$ 및 $PH_3$ 분자의 two center overlap integral을 계산하였을 때 이 값이 Mulliken의 값과 일치하였다.

• 한국생산제조학회지
• /
• 제26권2호
• /
• pp.205-213
• /
• 2017

In order to improve occupant protection in frontal crash, the IIHS introduced a small overlap frontal crash test in 2012. When the front corner of a car collides with another car or object, such as utility pole the test replicated the sequence of events. Because occupants move simultaneously forward and toward the side of the vehicle this test is challenging for some airbag and safety belt designs. In the small overlap frontal test, a car travels at 64 km/h toward a rigid barrier. A hybrid III dummy is positioned in the driver seat. 25% of the total width of the car strikes the barrier on the driver side. After review of small overlap frontal test protocol and overall rating, six run-throughs were performed according to the original test method.

• 전자공학회논문지A
• /
• 제31A권7호
• /
• pp.110-116
• /
• 1994

In this paper a Duty Effective Overlap Scanning method (DEOS) for the improvement of driving efficiency of LC displays which have the RMS voltage responding characteristics is proposed and new processing method of data signals for optimum application of this method is also proposed. Proposed method has a few advantages such as the increment of duty ratio the increment of driving power loaded on LC cell and the decrement of RMS voltage error rate caused by signal attenuation on electrodes composing of display when compared with the conventional method which is called as optimum voltage amplitude selection method. And also by adopting new data signal processing method which has 3 kinds of voltage levels additional advantage much improving crosstalk phenomenon which is the most serious problems of simple matrix structured display is obtained. For the characteristic estimation new mathematical representation for new overlap scanning method and data signal processing method are induced and defined. And by the defined formula and simulation the characteristics of the proposed method and the conventional method are compared and analyzed. As a result of estimation this new method being able to optimize the overlap rate of scan signal and using 3 levels of data signals has the characteristic which can improve the driving efficiency of LC displays.

• 한국항공우주학회지
• /
• 제35권8호
• /
• pp.661-669
• /
• 2007

지면효과에 대한 수치해석을 위한 격자생성 과정에서 발생하는 어려움을 해소하기 위하여 중첩격자 기법을 이용한 수치해석 기법의 타당성에 대한 연구를 수행하고 그 신뢰성을 검증하였다. 지면효과가 있는 경우와 없는 경우 RAE 101 익형주위의 저속 난류 유동장에 대한 수치해석을 수행하였고 다중블록격자 기법과 중첩격자 기법을 적용한 수치해석 결과를 실험결과와 비교하였다. 이를 통하여 중첩격자 기법을 이용함으로써 지면효과에 대한 수치해석과정을 정확하고 격자생성 문제없이 효과적으로 수행할 수 있음을 보였다.