• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.67 no.3
• /
• pp.467-473
• /
• 2018

R-Bar(Overhead Rigid Conductor system) is being developed for the high-speed in Europe because it has an advantage of cross section area reduction of tunnel compared with OCS (Overhead Catenary Line). Because there are lots of underground sections and mountains in korea, it is necessary to develop the R-Bar for a high-speed line. In this study, a method on speed-up of transition section between OCS and R-Bar is proposed. The commercial program, DAFUL, is used to predict a dynamic characteristics between Overhead Line and pantograph. The program is evaluated according to EN 50318 which is the European Norm for evaluation of the program. Using the evaluated modeling and method, a method for the max. speed of 250 km/h of transition section is proposed.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2015.10a
• /
• pp.854-857
• /
• 2015

As the number of devices integrated on system-on-chip(SoC) increases exponentially, energy reduction technology is essential. Dynamic Voltage and Frequency Scaling (DVFS) is a very effective technique for reducing power consumption. Since it requires complex voltage regulators and PLL circuits, DVFS tends to have significant overheads. In this paper, we propose a new voltage selection algorithm to minimize transition overhead for multiprocessor SoC (MPSoC). Simulation results show that proposed algorithm appears less energy consumption with transition overhead even though maintains performance.

• Proceedings of the IEEK Conference
• /
• 2006.06a
• /
• pp.213-214
• /
• 2006

To reduce the feedback overhead of predicted CSI (channel status information) of adaptive OFDM (orthogonal frequency division multiplexing), we use partial data of CSI and employ linear interpolation. Simulation results show estimated CSI and its MSE.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2019.11a
• /
• pp.188-190
• /
• 2019

Long-term global motion compensation (LT-GMC) was designed to compensate camera motion effectively. The LT-GMC warps a reference picture according to an estimated affine/homography model and stores it in its decoded picture buffer for long-term reference. Most previous works on LT-GMC have focused on improving quality of the warped picture, however, there has been only little consideration on the overhead of its motion coding. In this paper, we address this problem and propose a method, namely Scaling Predictor, to reduce the motion coding overhead for LT-GMC. Our experiment has shown BD-Rate reduction of 1.40% over conventional LT-GMC scheme by applying the proposed method.

• Proceedings of the KIEE Conference
• /
• 2000.11a
• /
• pp.232-235
• /
• 2000

Design and experiments of a nondestructive system to inspect deterioration of ACSR-OC (ACSR Outdoor Cross-linked Polyethylene Insulated Wire usually used in HV overhead distribution lines presented in this paper. ACSR-OC conductor built to pollutants air for a long period would be easily progress to corrode so that it may lead to the reduction of the effective cross section area of conductors. A fault diagnosis system consisting of a solenoid sensor, a constant current source with RF frequency signal processing unit and a motor driver/controller designed and implemented. This instrument can dot the sensor output variation due to deterioration corrosion, continuously. As a result, it was shown such corrosion detector can readily be utilized estimating the diameter change due to deterioration overhead distribution lines and in giving an warning or inform before severe aged conductor lead to fail.

• Journal of the Korean Society for Railway
• /
• v.9 no.5 s.36
• /
• pp.582-587
• /
• 2006

Since Kyung-Bu High Speed Line has been introduced, a railway electrification has been proceeded rapidly. Therefore, in this study, a specification and application standard for an overhead catenary supporting thin walled steel pole using STKT590 material are proposed in order to improve an economical efficiency. To decide the specification, strength analysis, deflection analysis, deflection test and fracture test are performed. If the supporting structures using high strength materials such as STKT590 are installed, the advantages of cost by the materials price reduction and demand and supply are expected.

• ETRI Journal
• /
• v.32 no.4
• /
• pp.622-625
• /
• 2010

In this letter, we assess the scalability of a path computation flooding (PCF) approach to compute optimal end-to-end inter-domain paths in a path computation element-based multi-domain network. PCF yields a drastically reduced network blocking probability compared to a blind per-domain path computation but introduces significant network control overhead and path computation complexity. In view of this, we introduce and compare an alternative low overhead PCF (LoPCF) solution. From the obtained results, LoPCF leads to similar blocking probabilities to PCF while exhibiting around 50% path computation complexity and network control overhead reduction.

• Proceedings of the KIEE Conference
• /
• 1998.11a
• /
• pp.245-247
• /
• 1998

Compacting of Overhead power transmission lines can be helpful in solving many problems, such as reduction of land and forest losses. decrease of the line's environmental impact zones, improvement of its electrical performance. And in overhead transmission lines, regular polygon configuration of bundled conductors are considered and adopted. This papers are compared to subconductor surface charges and electric field gradients, line parameters, natural capacities for regular polygon and modified configurations in 345kV 4 bundle 2 circuits horizontal type transmission lines.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.41 no.11
• /
• pp.87-95
• /
• 2004

This paper proposes a new test data compression/decompression method for SoC(Systems-on-a-Chip). The method is based on analyzing the factors that influence test parameters: compression ratio and hardware overhead. To improve compression ratio, the proposed method is based on Modified Statistical Coding (MSC) and Input Reduction (IR) scheme, as well as a novel mapping and reordering algorithm proposed in a preprocessing step. Unlike previous approaches using the CSR architecture, the proposed method is to compress original test data and decompress the compressed test data without the CSR architecture. Therefore, the proposed method leads to better compression ratio with lower hardware overhead than previous works. An experimental comparison on ISCAS '89 benchmark circuits validates the proposed method.

• Proceedings of the IEEK Conference
• /
• 2006.06a
• /
• pp.21-22
• /
• 2006

In this paper, to improve OFDM PAPR reduction performance of the conventional SLM method, we propose an effective SLM-PRSC hybrid scheme based on the repeated utilization of identical PRSC sequences in time domain. In the proposed scheme, after performing the SLM for the frequency domain OFDM symbol excluding the pre-determined PRSC positions, the final SLM-PRSC hybrid sequence with the lowest PAPR, which is generated by adding the time domain PRSC sequence to the results of the SLM is selected as the transmitted OFDM symbol. In particular, since the identical PRSC sequences generated a priori are repeatedly used for every OFDM symbol, excessive IFFT calculations are avoided. Moreover, the selected PRSC symbols in the frequency domain may be utilized as an overhead information for the SLM. Simulation results reveal that the proposed SLM-PRSC hybrid scheme can remarkably improve the PAPR reduction performance of the conventional SLM, while avoiding excessive increase of IFFT and PAPR calculations and the overhead for the SLM.