• Journal of Korea Society of Industrial Information Systems
• /
• v.10 no.1
• /
• pp.49-57
• /
• 2005

ATM Form has defined the guaranteed frame rate (GFR) service to provide minimum cell rate (MCR) guarantees for TCP traffic in ATM networks and allow it to fairly share residual bandwidth. GFR switch implementation consists of the frame-based generic cell rate algorithm (F-GCRA) and a frame forwarding mechanism. The F-GCRA identifies frames that are eligible for an MCR guarantee. The frame forwarding mechanism buffers cells at a frame unit according to information provided by the F-GCRA and forwards the buffered cells to an output port according to its scheduling discipline. A simple GFR mechanism with shared buffer with a global threshold is a feasible implementation mechanism, but has been known that it is insufficient to guarantee the MCR. This paper has estimated performance of GFR service for TCP traffic over ATM switches with the simple FIFO-based mechanism

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.23 no.8
• /
• pp.1907-1914
• /
• 1998

This paper proposes the adaptive connection admission cotrol using the variale MRR(measurement reflection ratio) and the distribution of the number of cells arriving during the fixed interval. This distribution is estimated from the measured number of cells arriving at the output buffer during the fixed interval and traffic parameters specified by user. MRR is varied by the difference of estimated distribution and measurement distribution. As MRR is adaptively varied by estimated distribution error of accepted connections, it quickly reduces estimation error. Also, the scheduling scheme is proposed for multiplexed traffic with various traffic characteristics. For each traffic class, this scheme estimates adaptively equivalent bandwidth and schedules according to equivalent bandwidth ratio of each traffic class, so it improves cell loss rate and link utilization.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.7 no.7
• /
• pp.1393-1398
• /
• 2003

In this paper, we propose a new switch architecture with one schedule at k-time slots, which k means the allocated time slots for each schedule. A conventional switch system uses a single time slot per each schedule but the proposed switch system uses multiple time slots per each schedule. Both the conventional switch md the proposed switch have same throughput but our switch system occupies multiple cell time slots per each schedule and hence can be implemented in scheduler of simple circuitry compared to the conventional switch. The proposed scheduling method for switch system will be applicable in switch system with high-speed data link rate.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.26 no.12C
• /
• pp.181-189
• /
• 2001

In this thesis, a policing algorithm is proposed, which is one of the traffic management function in ATM networks. The proposed algorithm minimizes CLR(Cell Loss patio) of high priority cells and solves burstiness problem of the traffic caused by multiplexing and demultiplexing process. The proposed algorithm has been implemented with VHDL and is divided into three parts, which are an input module, an UPC module, and an output module. In implementation of the UPC module\`s memory access, memory address is assigned according to VCI\`s LSB(Lowest Significant Byte) of ATM header for convenience. And the error of VSA operation from counter\`s wrap-around can be recovered by the proposed method. ANAM library 0.25 $\mu\textrm{m}$ and design compiler of Synopsys are used for synthesis of the algorithm and Synopsys VSS tool is used for VHDL simulation of it

• Journal of the Society of Naval Architects of Korea
• /
• v.42 no.2 s.140
• /
• pp.165-174
• /
• 2005

Recently, world leading companies on manufacturing field are trying to adopt a PLM methodology, which is a new production paradigm, for a survival and strengthening the competitiveness. Some projects for a digital shipyard including a methodology of a digital simulation framework are going on by Seoul national university and Samsung heavy industry. A Database methodology for a scheduling data, an interfacing methodology for a simulation input and output, and a synchronized simulation related methodology are required for enhancing the value of the digital simulation for shipbuilding. In this paper, such a methodologies and a related case study for a fabrication factory and an assembly factory are presented.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.24 no.12A
• /
• pp.1922-1931
• /
• 1999

A multicast traffic’s feature is the function of providing a point to multipoints cell transmission, which is emerging from the main function of ATM switch. However, when a conventional point-to-point switch executes a multicast function, the excess load is occurred because unicast cell as well as multicast cell passed the copy network. Additionally, due to the excess load, multicast cells collide with other cells in a switch. Thus a deadlock that losses cells raises, extremely diminishes the performance of switch. An input queued switch also has a defect of the HOL (Head of Line) blocking that less lessens the performance of the switch. In the proposed multicast switch, we use shared memory switch to reduce HOL blocking and deadlock. In order to decrease switch’s complexity and cell's processing time, to improve a throughput, we utilize the method that routes a cell on a separated paths by traffic pattern and the scheduling algorithm that processes a maximum 2N cell at once in the control part. Besides, when cells is congested at an output port, a cell loss probability increases. Thus we use the Output Memory (OM) to reduce the cell loss probability. And we make use of the method that stores the assigned memory (UM, MM) with a cell by a traffic pattern and clears the cell of the Output memory after a fixed saving time to improve the memory utilization rate. The performance of the proposed switch is executed and compared with the conventional policy under the burst traffic condition through both the analysis based on Markov chain and simulation.

• The Transactions of the Korea Information Processing Society
• /
• v.1 no.3
• /
• pp.367-379
• /
• 1994

This paper describes scheduling algorithms of the UNIX operating system and shows an analytical approach to approximate the average conditional response time for a process in the UNIX operating system. The average conditional response time is the average time between the submittal of a process requiring a certain amount of the CPU time and the completion of the process. The process scheduling algorithms in thr UNIX system are based on the priority service disciplines. That is, the behavior of a process is governed by the UNIX process schuduling algorithms that (ⅰ) the time-shared computer usage is obtained by allotting each request a quantum until it completes its required CPU time, (ⅱ) the nonpreemptive switching in system mode and the preemptive switching in user mode are applied to determine the quantum, (ⅲ) the first-come-first-serve discipline is applied within the same priority level, and (ⅳ) after completing an allotted quantum the process is placed at the end of either the runnable queue corresponding to its priority or the disk queue where it sleeps. These process scheduling algorithms create the round-robin effect in user mode. Using the round-robin effect and the preemptive switching, we approximate a process delay in user mode. Using the nonpreemptive switching, we approximate a process delay in system mode. We also consider a process delay due to the disk input and output operations. The average conditional response time is then obtained by approximating the total process delay. The results show an excellent response time for the processes requiring system time at the expense of the processes requiring user time.

• Journal of Advanced Navigation Technology
• /
• v.16 no.6
• /
• pp.988-996
• /
• 2012

Assuming perfect channel state information (CSI), the conventional interference alignment (IA) algorithm in the uplink cellular system suppresses inter-cell interference (ICI) by aligning ICI to a randomly selected reference vector. However, IA in practice relies on limited feedback between base stations and users, resulting in residual ICI. In this paper, we propose the optimization of the reference vector that minimizes the upper-bound of residual ICI power. Secondly, the iterative IA that designs the direction of transmit and receive filter is proposed to minimize the residual ICI as well as maximize the desired signals. Moreover, we propose the user scheduling method combined with proposed IA schemes which provides the multiuser diversity gain in multi-cell environments. Finally, the performance gain of the proposed IA algorithms compared with the existing IA are analyzed and demonstrated by simulation results.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.62 no.11
• /
• pp.1495-1504
• /
• 2013

Renewable energy integration and increased system complexities make system operator maintain supply and demand balance harder than before. To keep the grid frequency in a stable range, an appropriate spinning reserve margin should be procured with consideration of ever-changing system situation, such as demand, wind power output and generator failure. This paper propose a novel concept of dynamic reserve, which arrange different spinning reserve margin depending on time. To investigate the effectiveness of the proposed dynamic reserve, we developed a new short-term reliability criterion that estimates the probability of a spinning reserve shortage events, thus indicating grid frequency stability. Uncertainties of demand forecast error, wind generation forecast error and generator failure have been modeled in probabilistic terms, and the proposed spinning reserve has been applied to generation scheduling. This approach has been tested on the modified IEEE 118-bus system with a wind farm. The results show that the required spinning reserve margin changes depending on the system situation of demand, wind generation and generator failure. Moreover the proposed approach could be utilized even in case of system configuration change, such as wind generation extension.

• Journal of KIISE:Databases
• /
• v.29 no.1
• /
• pp.15-26
• /
• 2002

Most work on multimedia storage systems has assumed that client will be serviced using a round-robin strategy. The server services the clients in rounds and each client is allocated a time slice within that round. Furthermore, most such algorithms are evaluated on the basis of a tightly coupled cost function. This is the basis of well-known algorithm such as FCFS, SCAN, SCAN-EDF, etc. In this paper, we describe a scheduling module called Request Unifier(RU) that takes as input, a set of client request, and a set of constraints on the desired performance such as client waiting time or maximum disk bandwidth, and a cost function. It produces as output a Unified Read Request(URR), telling the storage server which data items to read and when these data items to be delivered to the clients. Given a cost function, a URR is optimal if there is no other URR satisfying the constraints with a lower cost. We present three algorithms in this paper that can accomplish this kind of request merging and compare their performance through an experimental evaluation.