• Environmental and Resource Economics Review
• /
• v.16 no.1
• /
• pp.129-169
• /
• 2007

The purpose of this study is to experiment and simulate the newly-updated Second Generation Model for Korea (SGM-Korea). With the updated model, we tried to simulate effect of carbon tax on $CO_2$ emissions and other macroeconomic variables for Korea. The baseline data are compared with projected profiles by various scenarios to evaluate its performance. Our contribution in this study is to having up-graded the model from its earlier version by building new hybrid input-output table based on 2000 input-output and energy balanced tables. According to our estimation, total $CO_2$ emission in Korea has already increased in 2000 to about 1.86 times the 1990 figure. The level of carbon tax required for the current level of $CO_2$ emission to be reduced to the 1995 or 2000 level seems to be too high for Korean economy to bear. It is possible to find a reasonable level of carbon tax, however, if it can combine it with improvement of energy efficiency at the rate of 0.5% to 1% per year. For Korea to meet its obligation to reduce $CO_2$ emissions, therefore, it is imperative for her to improve energy efficiency as well as to develop alternative energy source reducing its dependence on fossil fuel.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.16 no.1
• /
• pp.126-142
• /
• 2016

This paper presents a wide-frequency-range, low-power transceiver with an automatic impedance-matching calibration for TV-white-space (TVWS) application. The wide-range automatic impedance matching calibration (AIMC) is proposed for the Drive Amplifier (DA) and LNA. The optimal $S_{22}$ and $S_{11}$ matching capacitances are selected in the DA and LNA, respectively. Also, the Single Pole Double Throw (SPDT) switch is integrated to share the antenna and matching network between the transmitter and receiver, thereby minimizing the systemic cost. An N-path filter is proposed to reject the large interferers in the TVWS frequency band. The current-driven mixer with a 25% duty LO generator is designed to achieve the high-gain and low-noise figures; also, the frequency synthesizer is designed to generate the wide-range LO signals, and it is used to implement the FSK modulation with a programmable loop bandwidth for multi-rate communication. The TVWS transceiver is implemented in $0.13{\mu}m$, 1-poly, 6-metal CMOS technology. The die area of the transceiver is $4mm{\times}3mm$. The power consumption levels of the transmitter and receiver are 64.35 mW and 39.8 mW, respectively, when the output-power level of the transmitter is +10 dBm at a supply voltage of 3.3 V. The phase noise of the PLL output at Band 2 is -128.3 dBc/Hz with a 1 MHz offset.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.40 no.1
• /
• pp.19-29
• /
• 2003

This paper proposes a CMOS readout circuit for uncooled micro-bolometer arrays adopting a four-point step calibration technique. The proposed readout circuit employing an 11b analog-to-digital converter (ADC), a 7b digital-to-analog converter (DAC), and an automatic gain control circuit (AGC) extracts minute infrared (IR) signals from the large output signals of uncooled micro-bolometer arrays including DC bias currents, inter-pixel process variations, and self-heating effects. Die area and Power consumption of the ADC are minimized with merged-capacitor switching (MCS) technique adopted. The current mirror with high linearity is proposed at the output stage of the DAC to calibrate inter-pixel process variations and self-heating effects. The prototype is fabricated on a double-poly double-metal 1.2 um CMOS process and the measured power consumption is 110 ㎽ from a 4.5 V supply. The measured differential nonlinearity (DNL) and integrat nonlinearity (INL) of the 11b ADC show $\pm$0.9 LSB and $\pm$1.8 LSB, while the DNL and INL of the 7b DAC show $\pm$0.1 LSB and $\pm$0.1 LSB.

• Journal of Environmental Policy
• /
• v.9 no.4
• /
• pp.3-27
• /
• 2010

In this paper, we have analyzed the cost structure of the Korean manufacturing industry in relation to the central government's environmental investment(CGEI below) by applying translog variable cost function. Important findings are as follows. First, sufficiency degree of CGEI of 0.7230, less than optimal level of 1, causes production inefficiency. Therefore, central government should forward a strategy to raise CGEI to meet appropriate standards. In addition, inspite of the deficiency of CGEI, shadow priceis lower than market price due to q-value of 0.9572, yielding unfavorable conditions for CGEI. However, CGEI brings about increase in output, variable cost saving, and economies of scale of firms. Second, by comparing this study with an existing study(2010), we have discovered the following facts. In both studies, we find that there are deficiency of investment, unfavorable conditions in investment, economies of scale, and output increase due to investment. However, the current study has found that, CGEI, which shows efficiency by positive(+) shadow price, saves variable cost. Therefore, firms suffer from production inefficiency due to variable cost caused by a shortage of efficient CGEI. Moreover, the previous study conducted in 2010 found that investment in prevention of environmental pollution(IPEP below), which indicates inefficiency by negative(-) shadow price, cannot reduce variable cost. In such circumstances, firms yield abnormal production efficiency based on variable cost savings caused by inefficient IPEP. For this reason, firms should raise IPEP to optimal level to reduce IPEP inefficiency to achieve production efficiency by reducing variable cost.

• Composites Research
• /
• v.32 no.6
• /
• pp.301-306
• /
• 2019

Triboelectric nanogenerator (TENG) is one of the energy harvesting methods in spotlight that can convert mechanical energy into electricity. As TENGs produce high electrical output, previous studies have shown TENGs that can power small electronics independently. However, recent studies have reported limitations of TENG due to air breakdown and field emission. In this study, we developed a triboelectric nanogenerator that utilizes the metal-to-metal surface contact to induce ion-enhanced field emission and electron avalanche for electrons to flow directly between two electrodes. The average peak open-circuit voltage of this TENG was measured as 340 V, and average peak closed-circuit current was measured as 10 mA. The electrical output of this TENG has shown different value depending on the surface charge of surface charge generation layer. The TENG developed in this study have produced RMS power of 0.9 mW, which is 2.4 times higher compared to conventional TENGs. The TENG developed in this study can be utilized in charging batteries and capacitors to power portable electronics and sensors independently.

• Journal of IKEEE
• /
• v.24 no.3
• /
• pp.859-866
• /
• 2020

This paper proposes a 2-ch DC-DC converter with a wide-input voltage range from 2.9V~5.6V for wearable AMOLED displays. For positive voltage V_POS, a boost converter is designed using an over-charged voltage permissible circuit (OPC) which generates a normal output voltage even if over-input voltage is applied, and a SPWM-PWM dual mode with 3-segmented power transistors to improve efficiency at light load. For negative voltage V_NEG, a 0.5x regulated inverting charge pump is designed to increase power efficiency. The proposed DC-DC converter was designed using a 0.18-㎛ BCDMOS process. Simulation results show that the proposed DC-DC converter generates V_POS voltages of 4.6 V and V_NEG voltage of -0.6V~-2.3V for input voltage of 2.9V to 5.6V. In addition, it has power efficiency of 49%~92%, output ripple voltage has less than 20 mV for load current range of 1 mA~70 mA.

• Journal of Korean Society of Forest Science
• /
• v.90 no.3
• /
• pp.331-337
• /
• 2001

This study was performed to develope stem analysis program(Stemwin1.0) which can be used in PC with MS-Windows operating system. Stemwin1.0 uses width of annual tree ring measured with 1/100mm unit, and calculate increments of several growth factors such as DBH, height and volume with various methods. Mean DBH can be calculated by arithmetic and quadratic mean methods. Height can be estimated by parallel line, line extending and height curve methods. Volume can be estimated by Huber, Smalian, and Spline functions. Not only Total growth, Mean Annual Increment(MAI) and Current Annual Increment(CAI) of growth factors, but also merchantable volume and height, form factor, growth rate, and merchantable volume rate are automatically calculated. Stemwin1.0 can also output accurate stem taper curve with various scale, and prepare stem taper data(diameter at different disk heights) for statistical analysis for deriving stem taper model. Stemwin1.0 can export output data and graph to Excel for more compatible use of it.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.21 no.1
• /
• pp.12-22
• /
• 2018

In order to improve the vulnerability of current cities due to climate change, the disaster vulnerability analysis manual for various disasters is provided. Depending on the spatial units, the disaster vulnerability levels, and the conditions of the climatic factors, the results of the disaster vulnerability analysis will have a significant impact. In this study, relative assessments are conducted by adding the eup, myeon and dong unit in addition to census output area unit to analyze the impact on the spatial unit, and relative changes are analyzed according to the classification stages by expanding the natural classification, which is standardized at level four stage, to level two, four and six stage. The maximum rainfalls(10min, 60min, 24hr) are added for the two limited rainfall characteristics to determine the relativity of disaster vulnerable districts by index. The relative assessment results of heavy rainfall vulnerability index showed that the area ratio of disaster areas by spatial unit was different and the correlation analysis showed that the space analysis between the eup, myeon and dong unit in addition to census output area unit was not consistent. And it can be seen that the proportion of disaster vulnerable districts is relatively different a lot due to indexes of rainfall characteristics, spatial unit analysis and disaster vulnerability level stage. Based on the above results, it can be seen that the ratios of disaster vulnerable districts differ relatively significantly due to the level of the disaster vulnerability class, and the indexes of rainfall characteristics. This suggests that the impact of the disaster vulnerable districts depending on indexes is relatively large, and more detailed indexes should be selected when setting up the disaster vulnerabilities analysis index.

• Journal of Biomedical Engineering Research
• /
• v.26 no.6
• /
• pp.393-398
• /
• 2005

An electromechanical type is the most useful mechanism in the various pumping mechanisms. It, however, requires a movement converting system including a ball screw, a helical cam, or a solenoid-beam spring, which makes the device complex and may lessen reliability. Thus, the authors have hypothesized that an electromagnetic actuator mechanism can eliminate the movement converting system and that thereby enhance the mechanical reliability and operative simplicity of an electro­pneumatic pump. The purpose of this study was to show a novel application of electromagnetic actuator mechanism in pulsatile pump and to provide preliminary data for further evaluations. The electromagnetic actuator consists of stators with a single winding excitation coil and movers with a high energy density neodymium-iron-boron permanent magnet. A 0.5mm diameter wire was used for the excitation coil, and 1000 turns were wound onto the stators core with parallel. A prototype of extracorporeal electro-pneumatic pump was constructed, and the pump performance tests were performed using a mock system to evaluate the efficiency of the electromagnetic actuator mechanism. When forward and backward electric currents were supplied to the excitation coil, the mover effectively moved back and forth. The nominal stroke length of the actuator was 10mm. The actuator dimension was 120mm in diameter and 65mm in height with a mass of 1.4kg. The prototype pump unit was 150mm in diameter, 150mm in thickness and 4.5kg in weight. The maximum force output was 70N at input current of 4.5A and the maximum pump rate was 150 beats per minute. The maximum output was 2.0 L/minute at a rate of 80bpm when the afterload was 100mmHg. The electromagnetic actuator mechanism was successfully applied to construct the prototype of extracorporeal electro­pneumatic pump. The authors provide the above results as a preliminary data for further studies.

• Journal of Technology Innovation
• /
• v.20 no.3
• /
• pp.29-55
• /
• 2012

In order to successfully adopt and implement the Balanced Scorecard(BSC), firms need to respond adequately to the rapid changes of today's business environment and consider the growing importance of non financial factors in the business activities such as intangible assets(R&D expenditure, patent, goodwill, etc.). Our primary focus throughout this paper is on developing Key Performance Index(KPI) of BSC for R&D expenditure activities. In this study, we have developed and named PEI(Patent Efficiency Index),which is the KPI for R&D expenditure by focusing on the efficiency of a patent that is the output from the R&D expenditures. Secondarily, we have attempted to address the solution for the current problems of the traditional R&D performance measurement by using our developed PEI and examine the usefulness and effectiveness of the newly developed our PEI. According to the empirical test results, we find that the PEI is positively associated with ROA and Tobin's Q, respectively and show that our developed PEI is more effective and accurate than the traditional R&D performance measurement as a business performance measurement. Furthermore, these findings proves that we can measure and evaluate how efficiently the firms perform the R&D activities and shows that the PEI can be a critical index for evaluating firm's business performance related to the R&D expenditures.