• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2001.04a
• /
• pp.259-266
• /
• 2001

This paper presents the results of a structural analysis to determine design variables such as the inner basket array type, and thicknesses of the outer shell and the lid and bottom of a spent nuclear fuel disposal canister. The canister construction type introduced here is a solid structure with a cast iron insert and a corrosion resistant overpack, which is designed for the spent nuclear fuel disposal in a deep repository in the crystalline bedrock, entailing an evenly distributed load of hydrostatic pressure from the groundwater and large swelling pressure from the bentonite buffer. Hence, the canister must be designed to withstand these large pressure loads. Many design variables may affect the structural strength of the canister. In this study, among those variables, the array type of inner baskets and thicknesses of outer shell and lid and bottom are attempted to be determined through a linear static structural analysis. Canister types studied here are one for the pressurized water reactor (PWR) fuel and another for the Canadian deuterium and uranium reactor (CANDU) fuel.

• Steel and Composite Structures
• /
• v.24 no.2
• /
• pp.249-264
• /
• 2017

In this paper free linear vibration of lattice composite conical shells will be investigated. Lattice composite conical shell consists of composite helical ribs and thin outer skin. A smeared method is employed to obtain the variable coefficients of stiffness of conical shell. The ribs are modeled as a beam and in addition to the axial loads, endure shear loads and bending moments. Therefore, theoretical formulations are based on first-order shear deformation theory of shell. For verification of the obtained results, comparison is made with those available in open literature. Also, using FEM software the 3D finite element model of composite lattice conical shell is built and analyzed. Comparing results of analytical and numerical analyses show a good agreement between them. Some special cases as variation of geometric parameters of lattice part, effect of the boundary conditions and influence of the circumferential wave numbers on the natural frequencies of the conical shell are studied. It is concluded, when mass and the geometrical ratio of the composite lattice conical shell do not change, increment the semi vertex angle of cone leads to increase the natural frequencies. Moreover for shell thicknesses greater than a specific value, the presence of the lattice structure has not significant effect on the natural frequencies. The obtained results have novelty and can be used for further and future researches.

• Publications of The Korean Astronomical Society
• /
• v.11 no.1
• /
• pp.27-47
• /
• 1996

We have performed the high resolution computer simulation with 1D spherical hydrodynamic code in order to study the dynamical evolution of supernova ejecta interacting with a pre-existing fast wind structure. The fast wind structure has been calculated with $M_{in}=3{\times}10^{-6}M_{\odot}yr^{-1}$ and ${\upsilon}_{in}=1000km/sec$, which velocity is higher than the critical velocity relating to the initial radiative cooling. The fast wind becomes initially adiabatic. After a shell formation time of ${\sim}4000yrs$, the wind becomes radiative cooling at the shell zone, forming a thin dense radiative shell and an adiabatic wind bubble afterward. When supernova explodes in the wind center at 20,000yrs after the wind evolves, the supernova ejecta, which has a dense distribution of ${\rho}{\propto}r^{-n}$(here we have n = 9), interacts initially with, the understood wind zone, producing forward and reverse shocks. The reverse shock heats the supernova ejecta and its temperature increases. In this study, as the mass of the supernova ejecta is larger than that of the wind shell ($M_{ej}=5M_{\odot}$, $M_{sw}=2M_{\odot}$), we can conform two shell structures: an outer shell by the supernova ejecta and a secondarily shocked wind shell by it. The secondarily shocked wind shell should accelerates in this case to be R-T unstable, consequently producing the knots.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.13 no.4
• /
• pp.444-450
• /
• 1984

Effects of muscle extracts of five species of fish and shell-fish, mackerel, jack mackerel, yellow corvenia, shrimp and baby-neck clam, on lipid oxidation were investigated using a model system consisting of methyl linoleate absorbed in micro crystalline cellulose and extracts of fishes. Ethanol extracts of both mackerel and jack mackerel apparently showed inhibitory effect on the oxidation of methyl linoleate, while the extract of yellow corvenia, and baby-neck clam showed a slight catalyzed effect on contrary. The ethanol extract of shrimp, however, revealed no effect on the oxidation of methyl linoleate. When the ethanol extracts were dialyzed, the outer fractions of dark fleshed fish had a strong inhibitory effect on the oxidation of methyl linoleate, while the inner fractions did not. The outer fraction of yellow corvenia showed catalyzed effect, but the inner fraction inhibited the oxidation slightly. The outer fraction of shrimp had a strong inhibitory action, but the inner fraction showed no effect. The methanol-water fraction of chloroform-methanol extract of shrimp showed a quite strong inhibitory effect on the oxidation, whereas that of four other samples did the same levels of effect as ethanol extracts.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.2 no.1
• /
• pp.63-70
• /
• 1969

1. This paper deals with the natural mortality of the early young bivalve, Meretrix lusoria, (less than 13mm in shell length) and the perforations bored in the bivalve by bering snails, Neverita didyma and Natica severa. The investigation was carried out in the Kunsan area and in the laboratory from May to October of 1968. 2. The natural mortality of the field population during this period was $12.1\%$ and among this number $38.1\%$ were drilled by boring snails. 3. The common species of the Naticid gastropods, boring snails-Neverite didyma and Natice severa - are encountered in the habitat of M. lusoria. The perforations drilled by these species were broadly bevelled. 4. The location of the holes on the valves varied widely, while most of holes on the valves were located at a relatively definite umbo position. 5. The inner and outer diameters of the holes varied in proportion to the shell length of the clam; each ranging in shell length from 1 to 3mm, 3 to 6mm, and 6 to 13mm, and the outer diameters were 0.4-0.5mm, 0.7-0.9mm and 0.9-1.2mm. On the other hand, the ratio of the inner and outer diameters differed in proportion to the shell length of the clam. 6. Predation rates of Neverita didyma was much greater at night than during the day at room temperature. An average of 1.7 young clams was drilled and consumed, per snail, per day. This rate was greater than that of the Natica severa. 7 Predation rates varied in proportion to the shell length of the clam and the shell height of the snails.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.29 no.3 s.234
• /
• pp.439-446
• /
• 2005

The theoretical method is developed to investigate the vibration characteristics of the combined cylindrical shells with an annular plate joined to the shell at any arbitrary axial position. The structural rotational coupling between shell and plate is simulated using the rotational artificial spring. For the translational coupling, the continuity conditions for the displacements of shell and plate are used. For the uncoupled annular plate, the transverse motion is considered and the in-plane motions are not. And the additional transverse and in-plane motions of the coupled annular plate by shell deformation are considered in analysis. Theoretical formulations are based on Love's thin shell theory. The frequency equation of the combined shell with an annular plate is derived using the Rayleigh-Ritz approach. The effect of inner-to-outer radius ratio, axial position and thickness of annular plate on vibration characteristics of combined cylindrical shells is studied. To demonstrate the validity of present theoretical method, the finite element analysis is performed.

• Advances in nano research
• /
• v.14 no.6
• /
• pp.575-590
• /
• 2023

Many of small-scale devices should be designed to tolerate high temperature changes. In the present study, the states of buckling and stability of nano-scale cylindrical shell structure integrated with piezoelectric layer under various thermal and electrical external loadings are scrutinized. In this regard, a multi-layer composite shell reinforced with graphene nano-platelets (GNP) having different patterns of layer configurations is modeled. An outer layer of piezoelectric material receiving external voltage is also attached to the cylindrical shell for the aim of observing the effects of voltage on the thermal buckling condition. The cylindrical shell is mathematically modeled with first-order shear deformation theory (FSDT). Linear elasticity relationship with constant thermal expansion coefficient is used to extract the relationship between stress and strain components. Moreover, minimum virtual work, including the work of the piezoelectric layer, is engaged to derive equations of motion. The derived equations are solved using numerical method to find out the effects of temperature and external voltage on the buckling stability of the shell structure. It is revealed that the boundary condition, external voltage and geometrical parameter of the shell structure have notable effects on the temperature rise required for initiating instability in the cylindrical shell structure.

• Proceedings of the KSME Conference
• /
• 2004.11a
• /
• pp.1158-1161
• /
• 2004

Shell shaped hollow carbon nanoparticles are synthesized in the oxygen-hydrogen diffusion flame with $C_{2}H_{2}$ as precursor when it is irradiated with $CO_{2}$ laser of certain power. Below this power of laser, we couldn't get any other but amorphous soot. This shell shaped hollow carbon nanoparticles shows outer wall of high degree of crystallinity with void space inside of itself. And size distribution of these nanoparticles is measured with TEM image analysis. Also the structural comparison between this carbon nanoparticle and soot is done by Raman and XRD measurement. These results show this carbon nanoparticles are of grapheme structure, which means it has good crystallinity when compared with soot.

• Journal of Advanced Marine Engineering and Technology
• /
• v.22 no.5
• /
• pp.635-642
• /
• 1998

In automobile exhaust system. Internal pressure pulsation and shell vibration greatly affect the surface sound radiation. This noise is emitted from the muffler outer shell due to the pulsation of the exhaust gas pressure. This paper describes an analytical study of these characteristics as influenced by exhaust system structure. An exhaust simulator was used for generating the pressure pulsation. The relationship between shell vibration and radiated noise was used for generating the pressure pulsation. The relationship between shell vibration and radiated noise was identified by finding FRF.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.20 no.3
• /
• pp.329-338
• /
• 2007

The PSC box bridge constructed of concrete, reinforcing bar and tendon is a complex structure that exhibits tension cracks, nonlinear behaviour of steel and time dependent behaviour of concrete. The frame element is commonly used for construction stage analysis PSC bridges. However, the frame element does not show sufficient information when in the curved PSC box bridges. For the case of curved PSC bridges, the deformations in the inner and outer web are different. In this case, different jacking forces are required in the inner and outer webs. However, it is impossible to calculate different jacking forces if we use the frame element for construction stage analysis. In order to overcome this problem, the use of the shell element is essential for a three-dimensional construction stage analysis of PSC bridges. In the following, the formulation of a Quasi-conforming shell element and its application of PSC box girder bridge analysis are presented.