• 한국기계가공학회지
• /
• 제19권2호
• /
• pp.47-54
• /
• 2020

Themo-mechanical analysis was carried out using the finite element method for the steel shell of a cupola furnace. When the outer surface of the shell was cooled with water to within the temperature range of 35-80 ℃ during operation of the cupola, the inner surface of the shell was expected to exhibit a temperature of 65-248 ℃ based on heat transfer analysis. The shell was also expected to have an equivalent stress range of 100-280 MPa in the outer surface over the temperature range examined. Upon cooling the shell to obtain an outer surface temperature <80 ℃, the maximum equivalent stress of the shell did not exceed the yield strength. Although the temperature of the outer surface varied between 35 and 80 ℃ periodically due to the cooling control problem, the fatigue stress at the outer surface of the shell was calculated to be within the fatigue strength. During a non-operational period to examine the system between furnace operations, the thermal stress presented in the shell was sufficiently low to reach the desired yield strength and fatigue limit.

• 한국자기학회지
• /
• 제8권6호
• /
• pp.341-345
• /
• 1998

상용화된 5종류의 비정질 리본으로 제작한 실린더형 차폐체의 자기차폐효과를 미국재료시험협회(ASTM)에 준하여 연구하였다. 2705M과 2605CO를 이용한 복층 차폐인자는 2705M을 안쪽층으로 한 경우가 2605CO를 안쪽층으로 한 경우보다 상대적으로 2배 이상의 차폐효과를 얻을 수 있었다. 이는 바깥층이 2705M인 경우, 낮은 자기장세기에서 포화되는 2705M이 높은 세기의 자기장을 효과적으로 차폐하지 못하고, 1차적으로 차폐적된 자기장 세기에서 2605CO는 투자율이 낮기 때문이다. 반면 바깥층이 2605CO인 경우, 높은 자기장 세기에서 포화되는 2605CO인 높은 세기의 자기장을 효과적으로 차폐하고 1차적으로 차폐된 자기장 세기에서 2705M의 투자율은 높기 때문이다.

• 한국디지털건축인테리어학회논문집
• /
• 제13권4호
• /
• pp.69-76
• /
• 2013

As the energy consumed in building area has occupied a lot when looking into energy usage weights in area over the world, energy reduction building, eco-friendly architecture comes to the fore in the modern architecture. Discussions on the eco-friendly architecture have various concept definitions and targets to be achieved.The architectural works of Norman Foster are expressed as high-tech buildings using iron, glass, etc. in appearance, but they appear as those buildings with low energy load by analyzing environmental conditions from initial design stage that each building has, utilizing natural energy with design of outer shell and applying proper technical system. Thus, this study aims at providing basic data of outer shell planning through eco-friendly element technologies by considering pattern and outer shell design of buildings, principles of eco-friendly building plan as an eco-friendly building planning technique of Norman Foster as an example of plans to utilize building pattern, outer shell design and natural environments, in order to utilize passive measures as much as possible to increase energy saving methods and increase comfort by analyzing element technologies in the eco-friendly architecture in line with the modern flow.

• 한국음향학회:학술대회논문집
• /
• 한국음향학회 1998년도 학술발표대회 논문집 제17권 1호
• /
• pp.477-481
• /
• 1998

This paper describes the application of a coupled finite element-boundary element method to obtain the steady-state response of a hydrophone. The particular structure considered is a flooded piezoelectric spherical shell. The hydrophone is three-dimensionally simulated to transduce an incident plane acoustic pressure onto the outer surface of the sonar spherical shell to electrical potentials on inner and outer surfaces of the shell. The acoustic field formed from the scattered sound pressure is also simulated. And the displacement of the shell caused by the externally incident acoustic pressure is shown in temporal motion. The coupled FE-BE method is described in detail.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2010년도 제35회 추계학술대회논문집
• /
• pp.271-275
• /
• 2010

연소기 재생냉각 챔버 노즐확장부의 외피구조물 제작을 위한 성형치구 설계에 대한 연구를 수행하였다. 연소기 챔버에서 두께가 얇은 외피구조물은 판재의 성형을 이용하여 제작한다. 노즐확장부 외피구조물의 성형에서 노즐확장부와 동일한 형상의 치구로 성형하면 성형 후 구조물의 형상이 노즐확장부와 일치하지 않고 탄성복원에 의하여 그 형상이 변화한다. 따라서 노즐확장부 형상과 동일한 형상으로 성형을 완성하기 위해서는 탄성복원을 고려한 성형치구의 설계가 필요하다. 본 연구에서는 초기 성형 후 탄성복원에 의한 노즐형상과 실제 구조물의 형상과의 오차를 없애기 위하여 오차를 보상한 새로운 성형치구용 형상을 생성하였다. 구조해석 결과 설계 수정된 성형치구로 성형하면 노즐 형상과 성형된 구조물과의 형상 오차가 매우 작게 감소함을 확인할 수 있었다.

• International Journal of Industrial Entomology and Biomaterials
• /
• 제18권2호
• /
• pp.77-82
• /
• 2009

The egg shell of the tropical tasar silkworm, Antheraea mylitta is formed from the substances secreted by the follicular epithelium during the late vitellogenic stage. TEM study reveals the inner travecular and outer lamellar layer of chorion. The travecular layer is composed of the innermost wax layer, inner and outer chorionic layer. The inner and outer chorionic layers are connected to each other by vertical pillers forming of cavities. The lamellar layer is perforated by the aeropyles. SEM study reveals the differentiation of an anterior surface of the egg shell into four zones-micropylar, edge, aeropyles crown and disc zone. In the mycosis infected eggs the aeropyles and egg-shell surface are fully packed with the hyphae of the fungus, Aspergillus sydowi blocking of plastron respiration and causing the death of developing embryo so that mycosis infected eggs become sterile.

• Structural Engineering and Mechanics
• /
• 제36권6호
• /
• pp.729-744
• /
• 2010

There is world wide concern for safety of nuclear power installations after the terrorist attack on World Trade Center in 2001 and several other civilian structures in the last decade. The nuclear containment structure in many countries is a double shell structure (outer shell a RCC and inner a prestressed concrete). The outer reinforced concrete shell protects the inner shell and is designed for external loading like impact and blast. A comparative study of non-linear response of reinforced concrete nuclear containment cylindrical shell subjected to impact of an aircraft (Phantom) and explosion of different amounts of blast charges have been presented here. A material model which takes into account the strain rate sensitivity in dynamic loading situations, plastic and visco-plastic behavior in three dimensional stress state and cracking in tension has been developed earlier and implemented into a finite element code which has been validated with published literature. The analysis has been made using the developed software. Significant conclusions have been drawn for dissimilarity in response (deflections, stresses, cracks etc.) of the shell for impact and blast loading.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2010년도 제34회 춘계학술대회논문집
• /
• pp.428-432
• /
• 2010

연소기 챔버 노즐확장부 외피구조물의 성형특성에 대한 연구를 수행하였다. 노즐확장부 외피구조물의 제작에 사용되는 냉간압연 판재가 갖는 이방성 특성을 확인하기 위하여 세 가지 방향의 시편을 제작하여 인장시험을 수행하였으며, 그 결과를 이용하여 Lankford 값을 얻어 구조해석에 적용하였다. 실물형 연소기에 사용될 노즐확장부 외피구조물의 제작 및 성형공정을 통하여 외피구조물의 성형특성을 확인하였으며, 성형으로 얻은 변형률들을 구조해석 결과들과 비교하였다. 본 연구에서 얻은 결과들은 확대비가 더 큰 노즐확장부 제작을 위한 치구 및 성형공정의 설계에 활용될 예정이다.

• 천문학회보
• /
• 제35권2호
• /
• pp.73.1-73.1
• /
• 2010

Using the spectroscopic data secured with the Hamilton Echelle Spectrograph attached to a 3-m telescope at the Lick Observatory, we derived the expansion velocities from various line profiles in the 3600 $\AA$ to 10,000 $\AA$ based on the full width at half maximum and double peak of the high dispersion line profiles. The symmetrical shapes of the permitted line profiles indicate that the permitted line zone is symmetrical e.g., a spherical shell or bipolar + torus structures, which might be evidence of relatively recent ejection from the central star. Most other stronger forbidden lines might be coming from a main shell which appears as a bilateral symmetrical morphology, seen in HST and other ground-based telescopic images. The overall expansion velocities of this main shell structure that are responsible for most lines, seem to show the Hubble type expansion, i.e., accelerating shell. The faster expansion velocities of the permitted OII, NII, NIII and perhaps CII lines that do not suit to the Hubble type expansion, imply the existence of a somewhat smaller inner shell inside the outer main shell. We conclude that the nebular shell consists of a swiftly expanding inner shell and an outer normal shell excited by a central star of about 55,000K. The former compact zone appears to be responsible for the permitted C, N, and O lines while the latter extended shell appears to be responsible for H, He, and forbidden lines. We present some evidence that NGC 6833 be a member of the Galactic halo.

• 한국소음진동공학회논문집
• /
• 제26권2호
• /
• pp.203-209
• /
• 2016

According to the wear detection history for the steam generator tubes in the nuclear power plant, the outer tubes inside the steam generator have more problems on the flow-induced vibration than inner tubes. Many researchers and engineers have used a specified added mass coefficient for a given tube array during the design stage of the steam generator even though the coefficient is not constant for entire tube in cylindrical shell. The aim of this study is to find out the distribution of added mass coefficients for each tube along the radial location. When numbers of tubes inside a cylindrical shell are increased, values of added mass coefficients are also increased. Added mass coefficients at outer tubes are less than those of inner tubes and they are decreased with increasing the gap between the outermost tube and the cylindrical shell. It also turns out when the gap between the outermost tube and the cylindrical shell approaches infinite value, the added mass coefficient converges to an asymptotic value of given tube array in a free fluid field.