• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제50권7호
• /
• pp.307-314
• /
• 2001

A moving coil linear oscillatory actuator is consisted of the NdFeB permanent magnets with high specific energy as the stator, a coil-wrapped nonmagnetic hollow rectangular structure and an iron core as a pathway for magnetic flux. The variation of mover position and the consequent changes of coil flux path affect the coil inductance, because coil flux leaks at the open region of LOA stator. The interaction between permanent magnet and armature field is to shift the airgap flux density variation due to the magnet alone by a certain amount. The unbalanced reciprocation force due to armature reaction field decreases the advantage of moving coil LOA, such as a high degree of linearity and controllability in the force ad motion control. This paper firstly describes the coil inductance, the deviation of flux density, and the unbalanced reciprocation force, which are derived form the permeance model of LOA. Secondly, the analytical method are verified using the 2D finite element method and tests. Finally, the dynamic simulation algorithm taking the armature reaction effect and variable inductance into account, is proposed and confirmed through the experiment.

• 폴리머
• /
• 제32권1호
• /
• pp.19-25
• /
• 2008

본 논문은 실리카복합재료인 치약제의 결합제 역할을 하는 수용성 폴리머인 carboxymethylcellulose (CMC)와 carbomer, Mg/Al silicate의 최적의 조성 비율을 구하여 치약제의 레올로지 속성을 개선하는 데에 목적이 있다. 실험계획법 중 혼합물 반응표면분석법을 적용하여 응력, 겔 강도, 늘어짐, 탄성에 대해 oscillatory 레오미터로 측정하였다. 실험 결과 CMC와 carbomer는 치약제의 겔 강도와 응력에 많은 영향을 미치고, CMC는 치약제의 늘어짐을 초래하며, CMC와 Mg/Al silicate가 탄성에 도움이 된다는 사실을 규명하였다. 반응치 최적화를 통해 최적의 폴리머 및 silicate 조성비를 구하여 실험한 결과 개선된 레올로지 속성의 치약제를 확인할 수 있었다.

• 설비공학논문집
• /
• 제15권3호
• /
• pp.177-186
• /
• 2003

In the present study, the flow characteristics of developing turbulent flows are investigated at the exit region of a square cross-sectional 180" curved duct with dimensions of 40mm$\times$40mm$\times$4000mm (height $\times$ width $\times$length). Smoke particles produced from mosquito coils were used as seed particles for the LDV measurement. Experiments were carried out to measure axial velocity profiles, shear stress distributions and entrance lengths by using an LDV system and Rotating Machinery Resolver RMR with PHASE software. Experimental results clearly show that the time-averaged Reynolds number does not affect oscillatory flow characteristics because the turbulent components tend to balance the oscillatory components in the fully developed flow region. Also, the velocity profiles are in good agreement with 1/7power law such as the results of steady turbulent flows. The turbulent intensity linearly increases along the walls and is slightly higher, especially in the period of deceleration. On the other hand, the LDV measurements show that shear stress values in slightly higher in the period of deceleration due to the flow characteristics in the exit region. The entrance length where flows become stable appears at the point that is 40 times the length of hydraulic diameter.eter.

• 대한조선학회논문집
• /
• 제48권6호
• /
• pp.581-591
• /
• 2011

This paper describes the air compressibility effect in the CFD simulation of water impact load prediction. In order to consider the air compressibility effect, two sets of governing equations are employed, namely the incompressible Navier-stokes equations and compressible Navier-Stokes equations that describe general compressible gas flow. In order to describe violent motion of free surface, volume-of-fluid method is utilized. The role of air compressibility is presented by the comparative study of water impact load obtained from two different air models, i.e. the compressible and incompressible air. For both cases, water is considered as incompressible media. Compressible air model shows oscillatory behavior of pressure on the solid surface that may attribute to the air-cushion effect. Incompressible air model showed no such oscillatory behavior in the pressure history. This study also showed that the CFD simulation can capture the formation of air pockets enclosed by water and solid surface, which may be the location where the air compressibility effect is dominant.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제49권3호
• /
• pp.180-187
• /
• 2000

A moving-coil-type linear oscillatory actuator(LOA) consists of the NdFeB permanent magnets with high specific energy as the stator, a coil-wrapped nonmagnetic hollow rectangular structure. The LOA system was represented by the voltage equation of coil and the mechanical equation of motion. This set of equations was manipulated in state-space form. The EMF constant kE of equation parameters in state-space form can be obtained by using the induced voltage in armature coils at open circuit test. kE and other parameters provide the system matrices and transfer function for frequency response and dynamic simulation. Voltage source inverter-fed LOA is examined aiming to compare with results of simulation.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제49권11호
• /
• pp.713-719
• /
• 2000

This paper presents an approach toward improving the performance of Moving Coil Type Linear Oscillatory Actuator (MC-LOA) with the application of Finite Element Method (FEM) to a simple control system. MC-LOA has an unbalanced magnetic circuit due to its asymmetric structure and there is a different flux distribution on the air-gap along the current direction. The interaction driven by two fluxes between the Permanent Magnet (PM) and the current causes the unbalanced thrust and interferes with the proper oscillation of MC-LOA. In order to solve the above problems and improve the driving performance, it is necessary to analyze the rate of the unbalanced thrust according to the current direction by using FEM. Then, the analysis results are used to determine the input currents for both directions. Controlling the input currents can be easily achieved by a simple control system, such as Pulse Width Modulation (PWM), without complex units. The validity of the approach is verified by the experimental results.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2009년도 춘계학술대회 논문집 에너지변화시스템부문
• /
• pp.49-51
• /
• 2009

This paper deals with the analysis on eddy current losses for cylindrical linear oscillatory actuator (LOA) with Halbach array mover according to voltage waveform. This paper presents analytical procedures for calculation of eddy current losses using Poynting theorem. On the basis of the magnetic vector potential and a two-dimensional (2-d) cylindrical coordinate system, this paper derived analytical solutions of eddy current tosses using phase current analysis. The eddy current losses of each harmonic obtained by fast Fourier transform (FFT) analysis of phase current are compared with results obtained from finite-element method (FEM). Particularly, this paper shows that the eddy current losses of cylindrical LOA according to square voltage waveform are more significant than those according to sinusoidal voltage waveform.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2017년도 추계학술대회
• /
• pp.57-58
• /
• 2017

본 논문에서는 리튬이온 배터리의 배터리 보호회로 모듈에 대한 전자파 내성 실험에 대하여 연구하였다. 전자파 내성은 전원선, 입출력선, 안테나 포트 등을 통해 유입되는 전자파에 대한 전도성 내성과 공간적으로 방사되는 전자파에 대한 복사성 내성으로 나눌 수 있다. 실험 시료로 S사의 리튬이온 배터리를 사용하였고, 전도성 내성 실험에서는 Surge(IEC 61000-4-5), Ring wave(IEC 61000-4-12), Damped oscillatory wave(IEC 61000-4-18)에 대하여 실시하였다. 복사성 내성은 IEC 61000-4-3에 따라 실험하였다.

• Korea-Australia Rheology Journal
• /
• 제15권2호
• /
• pp.97-105
• /
• 2003

In the previous paper (Hyun et al.,2002), we have investigated the shape of storage modulus (G') and loss modulus (G") of complex fluids under large amplitude oscillatory shear (LAOS) flow. As the strain amplitude increases, owever, the stress curve becomes distorted and some important information may be smothered during data processing. Thus we need to investigate the stress data more precisely and systematically. In this work, we have obtained the stress data using high performance ADC (analog digital converting) card, and investigated the nonlinear response of complex fluids, 4wt% xanthan gum (XG), 2 wt% PVA/ 1 wt% Borax, and 1 wt% hyaluronic acid (HA) solutions, using Fourier transformation (FT) rheology. Comparing the strain signals in time domain with FT parameters in frequency domain, we could illustrate the sensitivity and importance of FT rheology. Diverse and unique stress patterns were observed depending on the material system as well as flow environment. It was found that they are not the outcome of experimental deficiency like wall slip but characteristics of the material system. When nonlinear response of complex fluids is analyzed, the intensity and phase angle of higher harmonic contributions should be considered together, and the shape of the stress signal was found to be strongly dependent upon phase angle.ngle.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2012년도 학술발표회
• /
• pp.505-509
• /
• 2012

본 연구의 목적은 천해 환경에서의 파형이 점착성 유사의 이동량에 미치는 영향을 살펴보는 것이다. 이를 위하여 이상적인 진동흐름(Oscillatory Flow)을 가정하고 점착성 유사의 이동에 적합한 1DV 모형을 적용하였다. 이상적인 진동흐름을 가정할 때는 다양한 파형을 고려하기 위해 왜곡되거나 비대칭적인 조건을 적용하였다. 크기와 밀도가 변화하는 점착성 유사의 응집현상을 고려하기 위해 기존에 개발된 응집현상 모형을 1DV 모형에 결합하였다. 2차 스토크스파 조건을 모사하기 위해 왜곡된 진동흐름, 톱니파를 모사하기 위해 비대칭 진동흐름 조건을 선택하였다. 수치모의 결과, 왜곡된 진동흐름 조건에서의 점착성 유사 이동량은 흐름의 왜곡도에 큰 영향을 받는 것으로 나타났다. 반면 가는 비점착성 유상의 경우는 왜곡도와 주목할 만한 관계를 보이지 않았다. 비대칭 진동흐름의 경우는 점착성 유사와 비점착성 유사가 서로 다른 방향을 나타내었다. 앞쪽으로 기운 비대칭 진동흐름 조건에서 점착성 유사의 이동량이 뒤쪽 방향으로 발생하는 반면 비점착성 유사는 흐름이 기운 방향과 동일한 방향으로 유사량을 나타내었다. 이러한 현상의 원인으로는 Phase-lag 효과가 고려되었다. 유사의 침강속도와 농도 프로파일의 변화, 물의 유동 조건 등은 복합적인 상호작용을 통해 Phase-lag 효과를 강화시키고 점착성 유사와 비점착성 유사의 이동량이 서로 다른 특성을 나타내게 하는 것으로 고려된다.