• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2001.11a
• /
• pp.235-238
• /
• 2001

단일 단말기로부터 멀티 통신이 가능하게 됨에 따라 광대역 또는 듀얼대역에서 사용되는 RF 소자 개발이 중요시되고 있다. 그러므로 소형, 저 비용의 멀티대역 VCO(Voltage Controlled Oscillator)개발이 요구된다. 본 논문에서 GSM/DCN 대역에서 사용 가능한 듀얼밴드 VCO을 설계하였다. 하나의 발진부, 듀얼 공진부, 완충증폭기, 스위치회로로 구성되었으며, 위상 보정 기법을 이용하여 각 밴드에 대한 발진 조건을 만족시키므로 사용 부품의 수를 줄일 수 있어 저 비용, 소형화, 낮은 위상잡음(phase noise)을 얻을 수 있다. 설계된 듀얼 VCO는 GSM 대역에서 -110dBc/Hz(100kHz offset) 이하의 위상 잡음과 DCN 대역에서 -108dBc/Hz(100kHz offset)의 위상 특성을 보인다. 출력전력은 0$\pm$3dBm이며 소비전력 7mA로 만족할만한 성능을 보인다.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.11b
• /
• pp.410-413
• /
• 2001

In this paper, we present results of this that design of the multi-layer VCO(Voltage Controlled Oscillator), which is composed of the resonation circuit and the oscillation circuit, using EM simulator and nonlinear RF circuit simulator. EM simulator is used for acquiring EM(Electromagnetic) characteristics of conductor pattern as well as designing multi-layer VCO, Acquired EM characteristics of the circuit pattern was used like real components at nonlinear RF circuit simulator. Finally VCO is simulated at nonlinear RF circuit simulator. The material for the circuit pattern was Ag and the dielectric was DuPont #9599, which is applied for L TCC process. The structure is constructed with 4 conducting layer. Simulated results showed that the output level was about 1[dBm], the phase noise was 102 [dBc/Hz] at 30[kHz] offset frequency, the harmonics -8dBc, and the control voltage sensitivity of 30[MHz/V] with a DC current consumption of l0[mA]

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.59 no.2
• /
• pp.471-475
• /
• 2010

This paper presents a frequency synthesizer using low voltage active inductor VCO(Voltage Controlled Oscillator). The low voltage active inductor VCO with feedback resistor increases its equivalent inductance and the quality-factor(Q). Under certain conditions, the low voltage active inductor with feedback resistor generates a negative resistance at the input. In this paper, the conditions for negative resistance are obtained by small signal analysis. The designed low voltage active inductor VCO covers a frequency band between 1059MHz and 1223MHz. The measured phase noise at 1.178GHz is -81.8dBc/Hz at 1MHz offset.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.26 no.4
• /
• pp.1-6
• /
• 1989

This paper addresses modeling of the gyro drift by using the structure function approach which has been originally developed for characterization of the oscillator phase noise. It is shown that by using this approach, an arbitrary order of random and deterministic gyro drift processes can be characterized and easily measured. The relationship between the drift power spectral density and structure function is clarified. It is also shown that this approach simplifies analysis of the effect of drift on the control system performance.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• v.9 no.1
• /
• pp.149-152
• /
• 2005

본 논문은 디지털 마이크로파 다수 반송파 시스템에 적용되는 고안정 국부발진기의 위상잡음에 대해서 분석하였다. 위상잡음의 영향을 분석하기 위해 Lorantizan모델을 사용하여 위상잡음 분산값을 구하였으며, 기저대역 I, Q채널에서 BER과의 특성을 모의실험 하였다. 시스템에 미치는 영향을 알아보기 위해서 BER특성을 분석한 결과, 위상잡음에 따라 영향을 많이 받으며, 특히 고차원 변조방식을 가질수록 위상잡음에 더 영향을 많이 받음을 확인하였다. 모의실험결과 BER을 10$^{-5}$을 기준으로 했을 경우, QPSK 변조방식은 분산값에 따라서 대략 4dB, 16-QAM 변조방식은 대략 9dB 정도의 성능차이를 나타내었다.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.11a
• /
• pp.410-413
• /
• 2001

In this paper, we present results of this that design of the multi-layer VCO(Voltage Controlled Oscillator), which is composed of the resonation circuit and the oscillation circuit, using EM simulator and nonlinear RF circuit simulator. EM simulator is used for acquiring EM(Electromagnetic) characteristics of conductor pattern as well as designing multi-layer VCO, Acquired EM characteristics of the circuit pattern was used like real components at nonlinear RF circuit simulator. Finally VCO is simulated at nonlinear RF circuit simulator. The material for the circuit pattern was Ag and the dielectric was Dupont ＃9599, which is applied for LTCC process. The structure is constructed with 4 conducting layer. Simulated results showed that the output level was about 1[dBm], the phase noise was 102 [dBc/Hz] at 30[kHz] offset frequency, the harmonics -8dBc, and the control voltage sensitivity of 30[MHz/V] with a DC current consumption of 10[mA].

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2019.05a
• /
• pp.467-468
• /
• 2019

본 논문은 차량용 장거리 레이더를 위한 저 위상잡음 77GHz CMOS 전압제어발진기를 제안한다. 이러한 회로는 낮은 위상잡음을 가지도록 설계되어 있고, 1.5볼트 전원에서 동작한다. 제안한 회로는 TSMC $0.13{\mu}m$ 고주파 CMOS 공정으로 설계하였다. 제안한 회로는 최근 발표된 연구결과에 비해 저 위상잡음, 저 전력 및 적은 면적 특성을 보였다.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.2 no.1
• /
• pp.37-49
• /
• 2008

At the present time the task of designing a highly integrated ZigBee radio frequency (RF) receiver with an excellent coexistence performance is still very demanding and challenging. This paper presents a number of system issues and design considerations for a ZigBee RF receiver, namely IEEE 802.15.4, for coexistence with wireless devices in the 2.4-GHz ISM-band. With regard to IEEE 802.15.4, the paper analyzes receiver performance requirements for; system noise figure (NF), system third-order intercept point (system-IIP3), local oscillator phase noise and selectivity. Based on some assumptions, the paper illustrates the relationship between minimum detectable signal (MDS) and various situations that involve the effects of electromagnetic interference generated by other wireless devices. We infer the necessity of much more stringent specification requirements than the published standard for various wireless communication field environments

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.05c
• /
• pp.291-294
• /
• 2003

The circuit substrate was made from the Low Temperature Cofired Ceramics(LTCC) that a $\varepsilon_\gamma$ was 7.8. Accumulated Varactor and the low noise transistor which were a Surface Mount Device-type element on LTCC substrate. Let passive element composed R, L, C with strip-line of three dimension in the multilayer substrate circuit inside, and one structure accumulate band-pass filter, resonator, a bias line, a matching circuit, and made it. Used Screen-Print process, and made Strip-line resonator. A design produced and multilayer-type VCO(Voltage Controlled Oscillator), and recognized a characteristic with the Spectrum Analyzer which was measurement equipment. Measured multilayer structure VCO is oscillation frequency 1292[MHz], oscillation output -28.38[dBm], hamonics characteristic -45[dBc] in control voltage 1.5[V], A phase noise is -68.22[dBc/Hz] in 100 KHz offset frequency. The oscillation frequency variable characteristic showed 30[MHz/V] characteristic, and consumption electric current is approximately 10[mA].

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2016.10a
• /
• pp.66-69
• /
• 2016

In this paper, we suggests a Ka-band LNB considering next-generation UHD satellite TVRO. Since Ka-band has grater attenuation than Ku-band in atmosphere, we designed the low-noise down-converter to improve receiving sensitivity and to extend a dynamic range of receiver. It aims to compensate a quality of ultra high definition transmission signal for rainfall. The low-noise block diagram consists of a three-staged amplifier (LNA), band-pass filter for deleting image (BPF), mixer and IF when considering nonlinear characteristics in the receiver RF front end module. Also, we showed a LNB through optimization processes affecting dynamic range directly in receiver FEM. Asa resuly of experiment, the gain of low-noise down-converter show between 58.5dB and 60.7dB, the noise figure has a high characteristic as 1.38dB. Finally, the phase noise of local oscillator is -63.10dBc at 100MHz offset frequency.