• Journal of Advanced Marine Engineering and Technology
• /
• 제22권4호
• /
• pp.436-444
• /
• 1998

Applicability of the RNG k-$\varepsilon$ model to the analysis of unsteady axisymmetric turbulent flow of a reciprocating engine including port/valve assembly is studied numerically. The governing equations based on non-orthogonal including port/valve assembly is studied numerically. The governing equations based on a non-orthogonal coordinate formulation with Cartesian velocity components are used and discretised by the finite volume method with non-staggered variable arrangements. The predicted results using the RNG k-$\varepsilon$ model of the unsteady axisymmetric turbulent flow within a cylinder of reciprocating model engine including port/valve assembly are compared to these from the modified k-$\varepsilon$ model and experimental data. Using the RNG k-$\varepsilon$ model seems the have some potential for the simulations of the unsteady turbulent flow within a port/valve-cylinder assembly over the modified k-$\varepsilon$model.

• 한국기계가공학회지
• /
• 제12권2호
• /
• pp.41-48
• /
• 2013

Springback is a very typical dimensional discrepancy phenomenon, which occurs usually on the final stamping parts after the tool loading is removed. Variation of springback leads to amplified variations and problems during assembly of the stamped components, in turn, resulting in quality issues. The variations in the properties of the incoming material and process parameters are the main causes of springback variation. In this research, a robust design methodology which combines orthogonal array based experimental design and design space reduction skim to reduce the springback variation for advanced high strength steel parts in sheet metal forming is suggested. The concept of design space reduction is adapted in the experimental design setup to improve the quality of the obtained solution. The effectiveness of the proposed procedures is illustrated through a robust design of springback in metal forming process of a cross member of auto body.

• 전자공학회논문지B
• /
• 제32B권11호
• /
• pp.1383-1392
• /
• 1995

In this paper, the method to incorporate TCVQ(Trellis Copded Vector Quantizer) into the encoding of the wavelet trans formed(WT) image followed by a variable length coding(VLC) or an entropy coding(EC) is considered. By WT, an original image is separated into 10 bands with various resolutions and directional components. TCVQ used to compress these WT coefficients is a finite state machine that encodes the input source on the basis of the current input and the current state. Wavelet basis used in this paper is designed by orthogonal spline function. A modified set partitioning algorithm to Wang's is also presented. A simple modification to Wang's algorithm gives a highly time-efficient result. Proposed WT-TCVQ encoder shows a very competitive result, giving 37.46dB in PSNR at 1.002bpp when encoding 512$\times$512 LENA.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2005년도 추계학술대회논문집
• /
• pp.385-388
• /
• 2005

Finite element method and Taguchi method were used to reduce the floor impact vibration of the reinforced concrete slab in the apartment buildings. At first, experimental results show that sound peak components to influence the rating of floor impact sound insulation were coincident with natural frequencies of the reinforced concrete slab, and there is a high linear relation between floor impact vibration and sound. The tables of orthogonal arrays were used for finite element analysis with 5 factors related to slab shape parameters and its results were analyzed by statistical method. The most effective factor to reduce the floor impact vibration was the length of living/kitchen room and the floor impact vibration was predicted by 30% reduction in the acceleration peak by the optimal design values of the factors.

• 한국자동차공학회논문집
• /
• 제10권3호
• /
• pp.111-122
• /
• 2002

European offset impact analysis of an electric vehicle was done using the robust design method. Section properties of some of the vehicle structure components which influence the european offset impact characteristics were chosen as the main factors fur the design. Eight factors were considered for the analysis: one with two level and seven with three level combinations comprising the L$\_$18/(2$^1$$\times$3$\^$7/) orthogonal array. It is shown that the sensitivities of the factors and the best combination of the factors can be obtained. One of the noteworthy results is that the design with the lower stiffness of the front components of engine room than the rear components can absorb more crash energy. Also it is shown that there exist interactions between some of factors considered.

• Journal of Microbiology and Biotechnology
• /
• 제16권12호
• /
• pp.1940-1946
• /
• 2006

The influence of environmental conditions on the ganoderic acid (GA) content in the fungus Ganoderma lucidum was investigated using a one-factor-at-a-time design and orthogonal design. Among the various medium components examined, sucrose, soybean powder or peptone, ferrous sulfate, and pH 6.0 were the most suitable carbon source (factor A), nitrogen source (factor B), mineral source (factor C), and initial pH (factor D), respectively, for the GA content in the one-factor-at-a-time design. According to the orthogonal design, the order of effect for the four factors on the GA content was A>C>D>B. The best level of factor A was $A_2$ (sucrose) with a value of +0.34 mg/100 mg DW. The optimal treatment combination was $A_2B_1C_3D_1$ with which the GA content reached up to 2.63$\pm$0.011 mg/100 mg DW. The interactions between the mineral ion and the nitrogen source, and the mineral ion and the pH were both highly significant (P<0.01). The highest interaction effect was ($B_2{\times}D_2$) with a value of +0.19 mg/100 mg DW, which was higher than the level effect value for $B_2$ (peptone) and D$_2$ (pH 5.0). Therefore, the results proved that interactions between factors cannot be ignored. The results also indicated the importance of the interactions between the factors, which may help to understand the metabolic pathway leading to triterpene biosynthesis and the expression and regulation of the key enzymes involved.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2006년도 하계종합학술대회
• /
• pp.607-608
• /
• 2006

A CMOS phase-locked loop (PLL) which synthesizes frequencies between $6.336{\sim}8.976GHz$ in steps of 528MHz and settles in approximately 150ns using the 528MHz reference clock is presented. Frequency hopping between the bands in the each mode is critical point to design the PLL in multi-band orthogonal frequency division multiplexing (OFDM) because frequency switching between each band is less than 9.5ns. To achieve the fast loop settling, integer-N PLL that operates with the high reference frequency to meet the settling requirement is implemented. Two PLLs that operate at 9GHz and 528MHz is integrated and shows the band hopping lower than 1ns.

• 대한원격탐사학회지
• /
• 제21권3호
• /
• pp.213-219
• /
• 2005

In the Korean seas, Sea Surface Temperature (SST) and Thermal ronts (TF) were analyzed temporally and spatially during 8 years from 1993 to 2000 using NOAA/AVHRR MCSST. In the application of EOF analysis for SST, the variance of the 1st mode was 97.6%. Temporal components showed annual variations, and spatial components showed that where it is closer to continents, the SST variations are higher. Temporal components of the 2nd mode presented higher values of 1993, 94 and 95 than those of other years. Although these phenomena were not remarkable, they could be considered ELNI . NO effects to the Korean seas as the time was when ELNI . NO occurred. The Sobel Edge Detection Method (SEDM) delineated four fronts: the Subpolar Front (SPF) separating the northern and southern parts of the East Sea; the Kuroshio Front (KF) in the East China Sea, the South Sea Coastal Front (SSCF) in the South Sea, and the Tidal Front (TDF) in the West Sea. TF generally occurred over steep bathymetry slopes, and spatial components of the 1st mode in SST were bounded within these frontal areas. EOF analysis of SST gradient values revealed the temporal and spatial variations of the TF. The SPF and SSCF were most intense in March and October; the KF was most significant in March and May.

• 한국통신학회논문지
• /
• 제25권6B호
• /
• pp.1082-1091
• /
• 2000

본 논문에서는 QAM (Quadrature Amplitude Modulation)을 시용하는 OFDM (Orthogonal Frequency Division Multiflexing)시스템에서 비이상적인 채널에 고속으로 데이터를 전송 시 발생하는 신호의 왜곡으로부터 보다 빠르고 효율적으로 등화를 하기 위한 등화기법을 제안하였다. 일반적으로 기존 OFDM 시스템 등화기법으로 주파수 영역에 단일 탭 선형 등화기를 사용하는 방법이 많이 사용 되었다. 이 경우 실제시스템에서 채널 환경이 시간에 따라 빠르게 변하게 될 경우 채널에 의한 왜곡을 완벽하게 보상해 줄 수없다. 그러므로 본 논문에서는 주파수 영역에 단일 탭 션형 등화기를 적용하는 대신 비선형 등화기를 적용하였으며 비선행 등화기의 단점인 낮은 SNR(Signal-to-Noise Ratio)에서의 급속한 성능 저하를 보완해주기 위하여 시간영역에 선형 등화기를 병행 사용하였다. 주파수 영역의 경우 비선형 등화기를 적용함에 있어 in-phase성분과 quadrature성분으로 구성되어 있는 QAM신호가 complex 채널 통과 시 fading에 의해 왜곡된 신호도 noise에 의해 왜곡된 신호처럼 in-phase성분과 quadrature 성분의 amplitude만이 변하므로 기존의 등화기 구조에서 cross성분을 제거하였고 이로 인하여 발생할 수 있는 약간의 오차를 보상해 주기위해 시간영역 등화가와 수렴 속도가 빠르고 오차가 적은 알고리즘을 사용하여 복잡도가 줄어든 등화기 구조를 제안하였다. 시간영역의 경우 채널왜곡에 강한 Goldcode를 trauung-sequence로 보호구간에 삽입하여 매 frame 마다 등화를 행하여 주파수영역 등화기의 성능을 보완해줌으로써 기존의 등화기법과 비교하여 보다 빠르고 효율적인 등화를 수행할 수 있는 등화기법을 제안 하였다.

• 한국항해항만학회지
• /
• 제30권9호
• /
• pp.729-734
• /
• 2006

The authors aim to establish the theory necessary for developing the free gyroscopic compass and focus on mainly two points. One is to suggest north-finding principle by the angular velocity of the earth's rotation, and the other is to suggest orthogonal coordinate transformations of the motion rate of the spin axis, which transforms the components of motion rate in the free gyro frame into those in the platform frame and that this transformed rate is, in turn, transformed into the NED(north-east-down) navigation frame. Subsequently, ship's heading is obtained by using the fore-aft and athwartship components of the motion rate of the spin axis in the NED frame. In addition it was found how to solve the transformation matrix necessary for transforming each frame.