• 한국전기전자재료학회논문지
• /
• 제24권1호
• /
• pp.12-16
• /
• 2011

In this study, we fabricated the flexible pentacene TFTs with the polymer gate dielectric and contact printing method by using the silver nano particle ink as a source/drain material on plastic substrate. In this experiment, to lower the cross-linking temperature of the PVP gate dielectric, UV-Ozone treatment has been used and the process temperature is lowered to $90^{\circ}C$ and the surface is optimized by various treatment to improve device characteristics. We tried various surface treatments; $O_2$ Plasma, hexamethyl-disilazane (HMDS) and octadecyltrichlorosilane (OTS) treatment methods of gate dielectric/semiconductor interface, which reduces trap states such as -OH group and grain boundary in order to improve the OTFTs properties. The optimized OTFT shows the device performance with field effect mobility, on/off current ratio, and the sub-threshold slope were extracted as $0.63cm^2 V^{-1}s^{-1}$, $1.7{\times}10^{-6}$, and of 0.75 V/decade, respectively.

• 새물리
• /
• 제68권11호
• /
• pp.1192-1195
• /
• 2018

본 연구는 각각 다른 증착 속도로 제작된 유기 박막 트랜지스터(organic thin film transistor, OTFT)의 전하 이동도와 문턱 전압을 측정하여 전기적 성질을 분석했다. OTFT의 활성층으로, 펜타센 (pentacene)을 $0.05{\AA}/s{\sim}1.14{\AA}/s$의 증착 속도에 따라 50 nm의 두께로 진공 열 증착했다. 드레인-소스 전극은 금 (Au)을 50 nm의 두께로 증착했다. 펜타센 증착 속도가 $0.05{\AA}/s$일 때 전하 이동도는 $1.9{\times}10^{-1}cm^2/V{\cdot}s$였고, 증착 속도가 $0.4{\AA}/s$로 증가함에 따라 전하 이동도는 $5.2{\times}10^{-1}cm^2/V{\cdot}s$로 증가했으며, 증착 속도가 $1.14{\AA}/s$로 증가함에 따라 전하 이동도는 $6.5{\times}10^{-1}cm^2/V{\cdot}s$로 감소했다. 따라서, 펜타센기반의 OTFT의 전하 이동도는 열 증착 속도에 의존함을 관측하였다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 추계학술대회 논문집
• /
• pp.5-5
• /
• 2009

Thin-film-transistors (TFTs) that can be prepared at low temperatures have attracted much attention because of the great potential for transparent and flexible electronics. One of the mainstreams in this field is the use of organic semiconductors such as pentacene. But device performance of the organic TFTs is still limited due to low field-effect mobility and rapid degradation after exposing to air. Alternative approach is the use of amorphous oxide semiconductors as a channel. Amorphous oxide semiconductors (AOSs) based TFTs showed the fast technological development, because AOS films can be fabricated at room temperature and exhibit the possibility in application like flexible display, electronic paper, and larges solar cells. Among the various AOSs, a-IGZO has lots of advantages because it has high channel mobility, uniform surface roughness and good transparency. [1] The high mobility is attributed to the overlap of spherical s-orbital of the heavy post-transition metal cations. This study demonstrated the effect of the variation in channel thickness from 30nm to 200nm on the TFT device performance. When the thickness was increased, turn-on voltage and subthreshold swing was decreased. The a-IGZO channels and source/drain metals were deposited with shadow mask. The a-IGZO channel layer was deposited on $SiO_2$/p-Si substrates by RF magnetron sputtering, where RF power is 150W. And working pressure is 3m Torr, at $O_2/Ar$ (2/28 sccm) atmosphere. The electrodes were formed with electron-beam evaporated Ti (30 nm) and Au (70 nm) bilayer. Finally, Al (150nm) as a gate metal was thermal-evaporated. TFT devices were heat-treated in a furnace at 250 $^{\circ}C$ and nitrogen atmosphere for 1hour. The electrical properties of the TFTs were measured using a probe-station. The TFT with channel thickness of 150nm exhibits a good subthreshold swing (SS) of 0.72 V/decade and on-off ratio of $1{\times}10^8$. The field effect mobility and threshold voltage were evaluated as 7.2 and 8 V, respectively.

• Bulletin of the Korean Chemical Society
• /
• 제30권10호
• /
• pp.2371-2376
• /
• 2009

Three phenoxazine-based conjugated polymers, namely, the aryl substituted phenoxazine homopolymer (P1) as well as the dimeric phenoxazine-fluorene (P2) and phenoxazine-bithiophene (P3) copolymers, were synthesized via the Ni(0) mediated Yamamoto reaction and the palladium-catalyzed Suzuki coupling reaction. The weight-averaged molecular weights ($M_w$) of P1, P2, and P3 were found to be 27,000, 22,000, and 15,000, respectively, and their polydispersity indices were 3.6, 1.8, and 2.1. All the polymers were soluble in common organic solvents such as chloroform, toluene, and so on. The UV-visible absorption maxima for P1, P2, and P3 in the film state were located at 421, 415 and 426 nm, respectively, and the ionization potentials of the polymers ranged between 4.90 and 5.12 eV. All the studied phenoxazine-based polymers exhibited amorphous behavior, as confirmed by X-ray diffraction (XRD) and atomic force microscopy (AFM) studies. Thin film transistors were fabricated using the top-contact geometry. P1 showed much better thin-film-transistor performance than P2 or P3: A thin film of P1 gave a saturation mobility of 0.81 ${\times}\;10^{-3}\;cm^2V^{-1}s^{-1}$ and an on/off ratio of about $10^2$.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2007년도 추계학술대회 논문집
• /
• pp.96-96
• /
• 2007

Low voltage organic TFTs (OTFTs) and ZnO based TFTs (<5V), utilizing room temperature deposited $Bi_{1.5}Zn_{1.0}Nb_{1.5}O_7$ (BZN) thin films were recently reported, pointing to high-k gate insulators as a promising route for realizing low voltage operating flexible electronics. $Bi_{1.5}Zn_{1.0}Nb_{1.5}O_7$ (BZN) thin film is one of the most promising materials for gate insulator because of its large dielectric constant (~60) at room temperature. However their tendency to suffer from relatively high leakage current at low electric field (>0.3MV/cm) hinder the application of BZN thin films for gate insulator. In order to improve leakage current characteristics of BZN thin film, we mixed 30mol% MgO with 70mol% BZN and their dielectric and electric properties were characterized. We fabricated field-effect transistors with transparent oxide semiconductor ZnO serving as the electron channel and high-k $(Bi_{1.5}Zn_{1.0}Nb_{1.5}O_7)_{0.7}(MgO)_{0.3}$ as the gate insulator. The devices exhibited low operation voltages (<4V) due to high capacitance of the $(Bi_{1.5}Zn_{1.0}Nb_{1.5}O_7)_{0.7}(MgO)_{0.3}$ dielectric.

• 한국진공학회지
• /
• 제17권5호
• /
• pp.435-441
• /
• 2008

본 논문은 TIPS Pentacene을 유기반도체로 사용한 유기박막 트랜지스터의 용제에 따른 전기적 특성에 대한 연구로서, 용제로는 chlorobenzene, p-xylene, chloroform, toluene을 사용하였으며, 회전 도포 방법을 사용하여 TIPS pentacene을 혼합하여 적층하였다. chlorobenzene을 사용하여 만들어진 유기박막 트랜지스터는 $1.0{\times}10^{-2}cm^2/V{\cdot}s$의 전계효과 이동도, $4.3{\times}10^3$의 on/off 비율, 5.5 V의 문턱전압의 특성을 보였다. 반대로, chloroform을 사용하여 만들어진 유기박막 트랜지스터는 $5.8{\times}10^{-7}cm^2/V{\cdot}s$의 전계효과 이동도, $1.1{\times}10^2$의 on/off 비율, 1.7 V의 문턱전압의 특성을 보였다. 또한 각 용제에 따른 TIPS pentacene 결정크기를 AFM을 통하여 측정하였다. 이와 같은 결과들을 통하여, 더 높은 끊는점을 가진 용제는 TIPS Pentacene의 더 큰 결정 크기와 높은 결정화 성향으로 인하여 더 좋은 전기적 특성을 가지는 것을 확인할 수 있었으며, 본 실험에서는 끓는점이 가장 높은 chlorobenzene을 사용한 TIPS Pentacene 유기박막 트랜지스터가 가장 좋은 전기적 특성을 나타내는 것을 확인하였다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제44회 동계 정기학술대회 초록집
• /
• pp.616-616
• /
• 2013

그래핀(Graphene)은 열전도도가 높고 전자 이동도(200,000 cm2V-1s-1)가 우수한 전기적 특성을 가지고 있어 전계 효과 트랜지스터(Field effect transistor; FET), 유기 전자 소자(Organic electronic device)와 광전자 소자(Optoelectronic device) 같은 반도체 소자에 응용 가능하다. 최근에는 아크 방출(Arc discharge method), 화학적 기상 증착법(Chemical vapor deposition; CVD), 이온-조사법(Ionirradiation)등을 이용한 이종원자(Hetero atom)도핑과 화학적 처리를 이용한 기능화(Functionalization)등의 방법으로 그래핀의 전도도를 향상시킬 수 있었다. 그러나 이러한 방법들은 기판의 표면을 거칠게 하며, 그래핀에 많은 결함들이 발생한다는 단점이 있다. 이러한 단점을 극복하기 위해 자가조립 단층막법(Self-assembled monolayers; SAMs)을 이용하여 기판을 기능화한 후 그 위에 그래핀을 전사하면, 자가조립 단층막의 기능기에 따라 그래핀의 일함수를 조절 가능하고 운반자 농도나 도핑 유형을 변화시켜 소자의 전기적 특성을 최적화 할 수 있다 [1-3]. 본 연구에서는 PET(polyethylene terephthalate) 기판에 SAMs를 이용하여 유연하고 투명한 그래핀 전극을 제작하였다. 산소 플라즈마와 3-Aminopropyltriethoxysilane (APTES)를 이용하여 PET 기판 표면 위에 하이드록실 기(Hydroxyl group; -OH)와 아민 기(Amine group; -NH2)를 순차적으로 기능화 하였고, 그 위에 화학적 기상 증착법을 이용하여 합성한 대면적의 균일한 그래핀을 전사하였다. PET 기판 위에 NH2 그룹이 존재하는 것을 접촉각 측정(Contact angle measurement)과 X-선 광전자 분광법(Xray photoelectron spectroscopy: XPS)을 통해 확인하였으며, NH2그룹에 의해 그래핀에 도핑 효과가 나타난 것을 라만 분광법(Raman spectroscopy)과 전류-전압 특성곡선(I-V characteristic curve)을 이용하여 확인하였다. 본 연구 결과는 유연하고 투명한 기판 위에 안정적이면서 패턴이 가능하기 때문에 그래핀을 기반으로 하는 반도체 소자에 적용 가능할 것이라 예상된다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2010년도 춘계학술회의 초록집
• /
• pp.17-17
• /
• 2010

The amorphous $Bi_5Nb_3O_{15}$ film grown at room temperature under an oxygen-plasma sputtering ambient (BNRT-$O_2$ film) has a hydrophobic surface with a surface energy of $35.6\;mJm^{-2}$, which is close to that of the orthorhombic pentacene ($38\;mJm^{-2}$, resulting in the formation of a good pentacene layer without the introduction of an additional polymer layer. This film was very flexible, maintaining a high capacitance of $145\;nFcm^{-2}$ during and after 10s bending cycles with a small curvature radius of 7.5 mm. This film was optically transparent. Furthermore, the flexible, pentacene-based, organic thin-film transistors (OTFTs) fabricated on the polyethersulphone substrate at room temperature using a BNRT-$O_2$ film as a gate insulator exhibited a promising device performance with a high field effect mobility of $0.5\;cm^2V^{-1}s^{-1}$, an on/off current modulation of $10^5$ and a small subthreshold slope of $0.2\;Vdecade^{-1}$ under a low operating voltage of -5 V. This device also maintained a high carrier mobility of $0.45\;cm^2V^{-1}s^{-1}$ during the bending with a small curvature radius of 9 mm. Therefore, the BNRT-$O_2$ film is considered a promising material for the gate insulator of the flexible, pentacene-based OTFT.

• 반도체디스플레이기술학회지
• /
• 제22권2호
• /
• pp.1-5
• /
• 2023

In the past, display devices have undergone many changes, such as plasma TVs and LCDs, and have continued to develop. Recently, new display technologies, such as Organic Light Emitting Diode displays and Inorganic Light Emitting Diode displays, have been developed. Among them, Micro LED displays have the potential to improve performance more than LCDs and OLEDs, but a lot of effort and time are needed until the mass production technology (transfer and bonding) of Micro LED displays is developed. We have developed a new Micro LED display light source that can be produced using existing transfer and bonding process technologies to enable faster commercialization of Micro LED in the industry. This light source is TFT deposition on LED. TFT deposition on LED has the advantage of being able to produce displays using existing process technology, making early commercialization of display application products possible. In this study, we applied the Active Driving method to verify the performance of TFT deposition on LED as a display to determine its commercialization potential. Additionally, to facilitate faster application of Micro LED in the industry, we applied TFT deposition on LED to Optical Wireless Communication systems, which are widely used in application service areas such as safety/security and sensors, to verify its communication performance. The experimental results confirmed that TFT deposition on LED is not only capable of AM driving but can also be applied to OWC systems.

• Composites Research
• /
• 제36권5호
• /
• pp.349-354
• /
• 2023

Poly(3-hexylthiophene) (P3HT)는 유기 용매에서 높은 용해도를 가지고 있으면서 상대적으로 쉽게 구할 수 있는 공액 고분자 중 하나이다. 그러나, 전자소자의 활성 소재로써 전기적 특성은 실제로 응용하기에는 부족하므로 추가 개선이 필요하다. 본 연구에서는, 서로 다른 위치 규칙성 (regio-regularity)을 가지는 두 P3HT 고분자 (즉, regioregular (RR) P3HT 및 regio-random (RRa) P3HT)를 혼합하여 혼합 박막의 전하 전달 특성을 크게 향상시킬 수 있음을 보여준다. 두 P3HT 고분자 간 비율을 변화시킴으로써 혼합 박막의 구조적 및 전기적 특성을 체계적으로 조사하였으며, 원자 힘 현미경(AFM), X선 회절(XRD) 및 UV-vis 흡수분광법을 사용하여 혼합 필름의 구조 및 광전자적 특성을 평가하였다. 혼합 박막의 결정성은 RRa-P3HT 함량이 20 wt%로 증가함에 따라 증가하였으며, 이후 80%까지 증가함에 따라 감소하였다. 전하 이동도의 경향성 또한 이와 같았으며, 20 wt%의 RRa-P3HT를 포함하는 혼합 박막의 전하 이동도는 가장 높은 0.029 cm²/V·s로 측정되었고 함량이 80 wt%까지증가함에따라 0.0007 cm²/V·s 로감소하였다.