• Journal of Korean Institute of Industrial Engineers
• /
• v.7 no.1
• /
• pp.13-20
• /
• 1981

Three inspection-ordering policies of a part with three types of lead times, i. e., expedited lead time, special lead time and regular lead time are considered. Policy I : The original part is replaced by a spare immediately after delivery, even if the original part is still operating. Policy II : The delivered spare is put into inventory until the original part failes. Policy III : The original part is inspected once again immediately after the delivery of the spare. If it is in a good state, the original part is used up to its mean degradation time, then replaced. If it is in a degradation state, the original part is replaced by a spare. A cost effectiveness for each policy is analyzed. Optimal inspection-ordering policy which maximizes a cost effectiveness is obtained. Time to degradation distribution and time to failure distribution are assumed to be Weibull and exponential, respectively. Variations of policies are observed with respect to variations of associated costs.

• International Journal of Reliability and Applications
• /
• v.11 no.2
• /
• pp.69-87
• /
• 2010

The optimal replacement problem was investigated for a multi-state deteriorated system for which the true internal state cannot be observed directly except when the system breaks down completely. The internal state was assumed to be monitored incompletely by a monitor that gives information related to the true state of the system. The problem was formulated as a partially observable Markov decision process. The optimal procedure was found to be a monotone procedure with respect to stochastic increasing ordering of the state probability vectors under some assumptions. Limiting the optimal procedure to a monotone procedure would greatly reduce the tremendous amount of calculation time required to find the optimal procedure.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.30B no.11
• /
• pp.84-92
• /
• 1993

Calibration of Engine models is a painstaking process but very important for successful application to automotive industry problems. A combined heuristic and machine learning approach has therefore been adopted to improve the efficiency of model calibration. We developed an intelligent calibration program called ICALIB. It has been used on a daily basis for engine model applications, and has reduced the time required for model calibrations from many hours to a few minutes on average. In this paper, we describe the heuristic control strategies employed in ICALIB such as a hill-climbing search based on a state distance estimation function, incremental problem solution refinement by using a dynamic tolerance window, and calibration target parameter ordering for guiding the search. In addition, we present the application of amachine learning program called GID3*for automatic acquisition of heuristic rules for ordering target parameters.

• Journal of the Korean Magnetic Resonance Society
• /
• v.2 no.1
• /
• pp.24-32
• /
• 1998

Drawn polyethylene was studied by 13C cross polarization magic angle spinning techniques. Solid-solid phase transition from orthorhombic to monoclinic crystalline phase by drawing was observed. In addition, using a synchronized magic angle spinning 2 dimension technique, we confirmed that macroscopic ordering of the polyethylene was produced by drawing.

• Bulletin of the Korean Chemical Society
• /
• v.33 no.10
• /
• pp.3397-3406
• /
• 2012

Three types of spherulitic morphologies have been investigated in dual substrate mode of Belousov-Zhabotinsky (BZ) type reaction system. Prior to growth of spherulites, three distinct patterning behaviors have been observed sequentially during the reaction process. Initial and the early-phase of reaction showed the emergence of concentric ring-like wave patterns. A colloidal-state of reaction consists of numerous fine solid particles, which forms primarily some nucleation centers of dendritic characters. The nucleation centers were found to grow in sizes and shapes with the progress of reaction. It leads to growth of dendritic-like spherulitic crystal patterns. The resultant spherulites showed transitions in their morphologies, including sea-weeds and rhythmic spherulitic crystal patterns, by the effects substituted organic substrate and in the higher concentration of bromate-initiator respectively. The branching mechanism and crystal ordering of spherulitic textures were studied with help of optical microscope (OPM) and scanning electron microscope (SEM). Characteristics of crystal phases were also evaluated using X-ray diffraction (XRD) and differential thermal analysis (DTA). Results indicated that the compositions of reactants and crystal orderings were interrelated with morphological transitions of spherulites as illustrated and described.

• Journal of Magnetics
• /
• v.16 no.2
• /
• pp.101-103
• /
• 2011

Solid solutions between $BaTiO_3$ and $LaFeO_3$ have been prepared through a solid state reaction method. The X-ray diffraction results reveal that $Ba_{1-x}La_xTi_{1-x}Fe_xO_3$ ($0.1\;{\leq}\;x\;{\leq}\;0.7$) compounds have a cubic structure, whereas the parent material $BaTiO_3$ has a tetragonal structure. The magnetization measurements indicate that the materials have a magnetic ordering at room temperature and the magnetic properties of the solid solutions depending on the doping amount of $LaFeO_3$. The origin of magnetic behaviors is believed to be from $Fe^{3+}$ ions.

• Advances in nano research
• /
• v.1 no.3
• /
• pp.153-158
• /
• 2013

An approach to achieving of spatially homogeneous, ordered ensemble of semiconductor quantum rods in polymer film of polyvinyl butyral is reported. The CdSe/ZnS quantum rods are embedded to the polymer film. Obtained film is stretched up to four times to its initial length. A concentration of quantum rods in the samples is around $2{\times}10^{-5}$ M. The absorption spectra, obtained in the light with orthogonal polarization, confirm the occurrence of spatial ordering in a quantum rod ensemble. Anisotropy of the optical properties in the ordered quantum rod ensemble is examined. The presented method can be used as a low-cost solution for preparing the nanostructured materials with anisotropic properties and high concentration of nanocrystals.

• Nuclear Engineering and Technology
• /
• v.37 no.3
• /
• pp.293-298
• /
• 2005

We have performed the density functional theory calculations of $UO_2$ using the spin-polarized generalized gradient approximation (SP-GGA) and the SP-GGA+U approach. The SP-GGA+U approach correctly predicts the insulating electronic structure with antiferromagnetic ordering, but the SP-GGA calculations predict metallic behavior. The cohesive properties obtained from the SP-GGA+U calculations are in good agreement with the available experimental results and previous calculations. The spin-polarized local density of states shows that the antiferromagnetic ordering of $UO_2$ is governed by 5f orbitals of uranium ion. Our calculations demonstrate that the strong correlation of U 5f electrons should be taken into account for a reliable description of $UO_2$ physics.

• Proceedings of the Membrane Society of Korea Conference
• /
• 1995.10a
• /
• pp.22-28
• /
• 1995

Since the discovery of liquid crystallinity by Reinitzer [1] in 1988 as he studied the melting behavior of cholesteryl benzoate, anisotropic structural ordering in fluid phases has been of considerable interest to chemists, physicists and other scientists. Polymers which exhibit liquid crystallinity either in solution (lyotropic) or in the neat state upon heating (thermotropic) have both theoretical and practical importance [2]. Du Pont's Kevlar, a high modulus polyamide fiber spun from a lyotropic solution, is a prime example of such an application.

• Economic and Environmental Geology
• /
• v.28 no.4
• /
• pp.327-335
• /
• 1995

Illite/smectite (I/S) in the Beaufort-Mackenzie Basin, Arctic Canada has been scrutinized on the basis of mineralogical analysis of 215 core and drill-cutting samples from 22 exploratory wells onshore and offshore. I/S in the Beaufort-Mackenzie Basin includes the following four types: random, a mixture of random and ordered, R1-ordered, and R>1-ordered I/S. A mixture of random and ordered I/S occurs in the transitional interval between random and R>1-ordered I/S, and may represent a metastable state in the ordering reaction. A widespread occurrence of the mixture in natural environments suggests that the ordering reaction may be a slow process that results in co-existence of reactants and products. K-saturation experiments show that layer charges of expandable layers in I/S are variable. High-charge expandable layers transform into illite-like layers upon simple K-saturation. K-saturation alters the composition and/or the degree of ordering in I/S, suggesting that illitization in nature can be transformational.