• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2008년도 춘계종합학술대회 A
• /
• pp.567-571
• /
• 2008

In this paper, an overview on the ordering sphere decoder (SD) class for space-time codes (STC) will be presented. In SDs, the ordering techniques are considered as promising methods for reducing complexity by exploiting a sorted list of candidates, thus decreasing the number of tested points. First, we will present the current state of art of SD with their advantages and disadvantages. Then, the overview of simply geometrical approaches for ordering is presented to address the question to overcome the disadvantages. The computer simulation results shown that, thanks to the aid of ordering, the ordering SDs can achieve optimal bit-error-rate (BER) performance while requiring the very low complexity, which is comparable to that of linear sub-optimal decoders.

• Progress in Superconductivity
• /
• 제14권1호
• /
• pp.24-29
• /
• 2012

$(TMTSF)_2BF_4$ containing non-centrosymmetric anions is well known to exhibit a metal insulator transition around 37 K by ordering of the anions with a $q_2$=(1/2, 1/2, 1/2) wave vector. We established pressure-temperature phase diagram of the $(TMTSF)_2BF_4$ compound and showed that it can belong to the general phase diagram of the $(TMTSF)_2X$ family. Application of hydrostatic pressure decreases the anion ordering transition temperature and the superconducting state is finally stabilized below 3.77 K under 7.7 kbar. Magnetoresistance measurement on the $(TMTSF)_2BF_4$ under 7.8 kbar is performed but neither the field-induced spin-density-wave state nor the rapid oscillation is observed up to 9 T.

• Journal of Magnetics
• /
• 제9권1호
• /
• pp.9-12
• /
• 2004

We have investigated sintering effects on Fe/Mo ordering and magnetoresistance (MR) in double perovskite-reflection lines due to $Sr_2FeMoO_6$ (SFMO). Polycrystalline samples have been prepared by the conventional solid-state reaction by sintering in a stream of 5% $H_2/Ar$ gas. All samples are single phase and exhibit a series of superstructurecation ordering at Fe and Mo sites. As sintering temperature increases from 900 to $1300^{\circ}C$, the degree of Fe/Mo ordering increases from 82 to 92%, magnetization (15 K, 7 kOe) increases from 1.6 to 2.7 ${\mu}_B/f.u.,$ and Curie temperature increases at a rate of 4.3 K/% with the increase of Fe/Mo ordering ratio. The magnitude of MR measured at 5 K is 19% for sample prepared at $1000^{\circ}C$ with magnetic fields of 7 kOe. The observed MR is proportional to the square of magnetization indicating that the MR feature in SFMO is explained by the spin-polarized tunneling at grain boundaries.

• 한국분말재료학회지
• /
• 제13권2호
• /
• pp.112-118
• /
• 2006

[ $R_{1/3}Sr_{2/3}FeO_{3}$ ](R=Pr, Nd, and Sm) was synthesized and their magnetic properties and charge ordering(CO) transition related with lattice dynamics and oxygen vacancy were systematically investigated. The charge disproportion ation(CD) in $R_{1/3}Sr_{2/3}FeO_{3}$(R=Pr,Nd) was in which two kins of iron with valence state $Fe^{3+}$ and $Fe^{5+}$ were found with ratio of 2:1. In this charge ordering state a sequence of $Fe^{3+}Fe^{3+}Fe^{5+}Fe^{3+}Fe^{3+}Fe^{5+}$ exists aligned along the [111] direction of the pseudocubic perovskite structure. The charge ordering exist in distorted structure involving $t_{pd}$ hybridization. The disordering phases coexist in distorted structure as temprature in creases that is controlled amount of oxygen vacancy. The magnetic hyperfine fields indicate charge tranfering temperature as it dissapeared drastically.

• Journal of Magnetics
• /
• 제18권4호
• /
• pp.412-416
• /
• 2013

FePt:Ag (100 nm) nanocomposite thin films were prepared on naturally-oxidized Si substrates by dc magnetron sputtering at room temperature. X-ray diffraction (XRD) and transmission electron microscopy (TEM) are used to investigate the effects of annealing pressures on the ordering processes and microstructures of these films. The average sizes for the $L1_0$ ordered domains and the FePt grains are reduced to d = 9 nm and D = 13 nm from d = 19 nm and D = 34 nm, respectively, when the annealing pressure is enhanced to 0.6 GPa from room pressure at 873 K. Furthermore, the size distribution is improved into a narrow range. With increasing pressure, the coercivity of $L1_0$-FePt:Ag thin films decreases from 15.1 to 7.6 kOe. In the present study, the effects of high pressure on the $L1_0$ ordering processes and microstructures of FePt:Ag nanocomposite films were discussed.

• 산업경영시스템학회지
• /
• 제11권17호
• /
• pp.9-14
• /
• 1988

A (s, S) inventory policy is studied for a continuous inventory model in which lead times are dependent on the ordering quantity. The model assumes that at most one order is outstanding and demands occur in a compound poison process. The steady-state probability distributions of the inventory levels are derived so as to determine the long-run expected average cost. And the computational procedure is presented.

• 산업경영시스템학회지
• /
• 제33권3호
• /
• pp.10-21
• /
• 2010

Promotion system can be used as strategical management weapon to enhance the sales power. Planned order system has some similarities with promotion system to create purchasing power and to supply the service parts with low price on purpose. The only difference is whether it is prearranged event or not. The effectiveness of forecasting has increased with normal state of ordering process. However, the accuracy of forecasting has diminished with irregular state of ordering, such as demand occurrences by unexpected climate change or intended planned order by the company. A planned order system is examined through the process of computing the effectiveness on the basis of forecasting in this paper. And it is suggested that how to increase the accuracy of forecasting capability under the planned order system.

• 분석과학
• /
• 제8권4호
• /
• pp.493-498
• /
• 1995

PAZO-6 is a new combined type liquid crystalline polymers (LCP) which has two types of mesogens combined non linearly. Ordering of branch mesogen azo group, in PAZO-6 is an important parameter to observe as well as the substitution effect on the backbone. The related small molecules sllch as monomers as well as the polymer itself are studied by solid state NMR techniques. Preliminary $^{13}C$ CP/MAS (cross polarization/ magic angle spinning) spectral results suggest that the azo groups in the monomers are not aligned with themselves. Azo groups in the monomers seem to be poorly ordered between well ordered p-phenylene terephthalate moeities. Similar disordering tendency of the azo group in PAZO-6 is deduced from the overall aromatic carbon peak positions which are not much different from those of the monomer.

• 한국산학기술학회논문지
• /
• 제20권7호
• /
• pp.45-51
• /
• 2019

현대 파일 시스템은 예기치 못한 시스템 크래시 또는 재난 상황에서도 데이터의 일관성 유지를 위해 저널링 메커니즘을 유지한다. 그러나 저널링은 I/O 처리율을 떨어뜨리는 문제가 있다. 이 성능 저하 문제는 데이터 버퍼와 메타데이터 버퍼간의 오더링 메커니즘과 2단계 버퍼쓰기에서 기인하는데. 특히, 만약 데이터 버퍼와 메타데이터 버퍼가 동시에 저널링이 되면, 2단계 쓰기 때문에 심각한 성능저하가 발생하며, 이는 I/O 성능과 시스템 신뢰도 간의 Trade-off 관계가 있음을 나타낸다. 본 논문은 RFJ라는 신뢰성 있는 고속 저널링 기법을 제안한다. 이 기법은 Ordering enforced writeback 저널링 모드와 selective journaling 메커니즘을 도입해서 높은 신뢰도와 동시에 고성능 I/O가 가능하게 한다. 본 논문에서 제안한 기법의 실험 결과 기존 Ext3 저널링 모드 대비 약 5배 이상 빠른 I/O 처리량을 지원하면서 동시에 Ext3 저널링과 동일한 수준의 신뢰성을 나타는 것을 확인 할 수 있었다.

• 대한산업공학회지
• /
• 제7권1호
• /
• pp.13-20
• /
• 1981

본 연구에서는 세가지 형태의 검사주문정책이 제시되었다. 부품 주문시 원래부품의 상태가 가동상태, 퇴화상태, 고장상태인가에 따라 보통주문, 특별주문, 긴급주문으로 분류되고, 각 주문형태는 각기 다른 인도기간으로 특정지워진다. 정책 I은 대체부품이 도착되면 원래부품이 가동중이라도 대체시키는 경우이고 정책 II는 도착된 대체부품을 원래부품의 고장발생때까지 재고시켜 두는 것이다. 정책 III은 대체부품이 도착되면 가동중인 원래부품에 검사를 한번 더 시행하여, 이것이 가동상태에 있으면 퇴화가 발생되는 평균시간까지 더 사용하고 난뒤 대체시키고, 퇴화상태에 있으면 대체부품과 즉시 대체시키는 것이다. 이와 같은 세가지 정책하에서 비용유효성 함수가 제시되고, 퇴화밀도함수와 고장밀도함수가 각각 Weibull과 지수분포를 따르는 경우 적정검사주문 시간을 구하고, 고장비용에 대한 부품가격과 고장비용에 대한 검사 비용의 변화에 따른 정책 변화가 분석되었다.