• Applied Science and Convergence Technology
• /
• v.24 no.5
• /
• pp.196-202
• /
• 2015

Human blood consists of 55% of plasma and 45% of blood cells such as white blood cell (WBC) and red blood cell (RBC). In plasma, there are many kinds of promising biomarkers, which can be used for the diagnosis of various diseases and biological analysis. For diagnostic tools such as a lab-on-a-chip (LOC), blood plasma separation is a fundamental step for accomplishing a high performance in the detection of a disease. Highly efficient separators can increase the sensitivity and selectivity of biosensors and reduce diagnostic time. In order to achieve a higher yield in blood plasma separation, we propose a novel fluid wing structure that is optimized by COMSOL simulations by varying the fluidic channel width and the angle of the bifurcation. The fluid wing structure is inspired by the inertial particle separator system in helicopters where sand particles are prevented from following the air flow to an engine. The structure is ameliorated in order to satisfy biological and fluidic requirements at the micro scale to achieve high plasma yield and separation efficiency. In this study, we fabricated the fluid wing structure for the efficient microfluidic blood plasma separation. The high plasma yield of 67% is achieved with a channel width of $20{\mu}m$ in the fabricated fluidic chip and the result was not affected by the angle of the bifurcation.

• The Korean Journal of Health Service Management
• /
• v.6 no.3
• /
• pp.39-52
• /
• 2012

Main purpose of this study is to provide some managerial suggestions for local small and medium-sized hospitals that are in poorer business environment than large hospitals such as university hospitals, in managing the manpower efficiently, improving business performance and enhancing competitiveness, by empirically investigating the relationship among competency, organizational structure and business performance. Major results are as follows: First, regression analysis for the effects of hospital competency on nonfinancial performance revealed that marketing competency, intangible resource competency and financial resource competency, in that order of importance, had significant influence on nonfinancial performance. Second, regarding the analysis of the effects of hospital competency on financial performance, financial resource competency, marketing competency and intangible resource competency, in that order of importance, significantly affected financial performance. Third, as for the moderating effect, significant result was obtained in an interaction between hospital competency and organizational structure. Financial resource competency had a positive significant impact on nonfinancial performance. However, it had negative significant impact on it by interactive effect with organizational structure.

• Journal of Korea Multimedia Society
• /
• v.2 no.1
• /
• pp.9-21
• /
• 1999

This paper presents the time-segmented storage structure in order to increment search performance and the two data migration strategies: migration by Time Granularity and migration by LST-GET. In the migration strategy by Time Granularity, we describe how to assign entity version to the past, current segment, and future segments. We also describe searching and moving processes for data validity at a granularity level. In the migration strategy by LST-GET, we describe how to computer the value of dividing criterion. We simulate the search performance of the proposed segmented storage structure in comparison with the conventional storage structure in comparison with the conventional storage structure in relational database system. Finally, extensive simulation studies are performed in order to compare the search performance of the migration strategies with the time-segmented storage structure.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.22 no.2
• /
• pp.27-33
• /
• 2014

There are several methods to improve the flight efficiency of HALE(High Altitude Long Endurance) UAV(Unmaned Aerial Vehicle). Airframe structural point of view, weight reduction of the airframe structure is the most important method to improve the flight efficiency. In order to reduce the weight of airframe structures, new concepts which are different from traditional airframe structure design such as the mylar wing skin should be introduced. The spar is the most important component in a mylar skin wing structure, so the spar weight reduction is the key point for reduction of the wing structural weight. In this study, design trade-off study for the front spar of the HALE UAV wing is conducted in order to reduce the weight. Design and analysis procedure of high aspect ratio wing spar are introduced. Several front spar structures are designed and trade-off study regarding the weight and strength for the each spar are performed. Spar design configurations are verified by the static strength test. Finally, optimal front spar design is decided and applied to the HALE UAV wing design.

• Earthquakes and Structures
• /
• v.10 no.4
• /
• pp.867-891
• /
• 2016

This paper addresses numerically the behavior of steel structures under Fire-after-Earthquake (FAE) loading. The study is focused on a four-storey library building and takes into account the damage that is induced in structural members due to earthquake. The basic objective is the assessment of both the fire-behavior and the fire-resistance of the structure in the case where the structure is damaged due to earthquake. The combined FAE scenarios involve two different stages: during the first stage, the structure is subjected to the ground motion record, while in the second stage the fire occurs. Different time-acceleration records are examined, each scaled to multiple levels of the Peak Ground Acceleration (PGA) in order to represent more severe earthquakes with lower probability of occurrence. In order to study in a systematic manner the behavior of the structure for the various FAE scenarios, a two-dimensional beam finite element model is developed, using the non-linear finite element analysis code MSC-MARC. The fire resistance of the structure is determined using rotational limits based on the ductility of structural members that are subjected to fire. These limits are temperature dependent and take into account the level of the structural damage at the end of the earthquake and the effect of geometric initial imperfections of structural members.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.25 no.6
• /
• pp.432-439
• /
• 2015

In order to reduce the structure borne noise of the equipment sufficiently, its exciting force should be restricted and additional anti-vibration devices such as resilient mount and bellows should be applied. Since the structure borne noise is dependent on the design of the base for the equipment, it is very important to design the base with low vibration. Therefore, in this research, various types of the base design for the shipboard equipment are investigated to reduce the structure borne noise. In order to design the base with low vibration, the exciting force at the center of the gravity of the equipment is firstly defined through the experiment. Using the exciting force identified by experiments, various types of base designs for the typical turbo machine are evaluated by FEM(finite element method) analysis.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.60 no.2
• /
• pp.446-450
• /
• 2011

Tunable SC(Switched Capacitor) bandpass ${\Sigma}-{\Delta}$(Sigma-Delta) modulator used in wireless system receiver occurs a signal attenuation according to tuning of center frequency in signal bandwidth. In this paper, tunable bandpass 4th order SC bandpass ${\Sigma}-{\Delta}$ modulator with novel structure is proposed for rejection of signal attenuation in signal bandwidth. The existing structure uses a ten variable coefficient values for rejection of signal reduction in the modulator. But the proposed structure only use a two variable coefficient values for rejection of signal attenuation in the modulator. Also, an adder and comparator is replaced with a comparator having 4 inputs in the modulator. Therefore, the existing structure has one more OP-AMP. The purposed modulator was designed in $0.18\;{\mu}m$ CMOS technology. The resolution of the modulator within 310 kHz bandwidth and 40 MHz sampling frequency under 6.67 MHz, 10 MHz and 13.33 MHz intermediate frequency are over 10 bit.

• Journal of the Korean Society for information Management
• /
• v.28 no.1
• /
• pp.123-144
• /
• 2011

This study compared Author Profiling Analysis(APA) to Author Co-Citation Analysis (ACA). The former is a new analytic technique on the intellectual structure of a science whereas the latter is a traditional analytic technique. The purpose of this study was to propose appropriate methods to analyze intellectual structure of a science in the Korean research environment. In order to achieve the goal, this study adopted APA using Text Mining for analysis on the intellectual structure of a science rather than relying on citation index in order to determine a potential utility of the new analytic technique that can identify the intellectual structure.

• The Mathematical Education
• /
• v.53 no.1
• /
• pp.25-40
• /
• 2014

Mathematical concept exists in the structural form, not in the independent form. The purpose of this study is to consider the network which students actually have for the mathematical concept structure related to the properties of derivatives. First, we analyzed the properties of derivatives in 'Mathematics II' and showed the mathematical concept structure of the relations among derivatives, functions, and primitive functions as a network. Also, we investigated the understanding of high school students for the mathematical concept structure between derivatives and functions, and the structure between functions and second order derivatives when the functional formula is not given, and only the graph is given. The results showed that students mainly focus on the relation of 'function-derivatives', the thinking process for direction of derivative and the thinking style for algebra. On this basis, we suggest the educational implication that is necessary for students to build the network properly.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.19 no.12
• /
• pp.70-79
• /
• 2020

This paper describes a comparative study of characteristics of probabilistic design using various reliability analysis methods in the structure design of an automatic salt collector. The thickness sizing variables of the main structural member were considered to be random variables, including the uncertainty of corrosion, which would be an inevitable hazard in the work environment of the automatic salt collector. Probabilistic performance functions were selected from the strength performances of the automatic salt collector structure. First-order reliability method, second-order reliability method, mean value reliability method, and adaptive importance sampling method were applied during the reliability analyses. The probabilistic design performances such as reliability probability and numerical costs based on the reliability analysis methods were compared to the Monte Carlo simulation results. The adaptive importance sampling method showed the most rational results for the probabilistic structure design of the automatic salt collector.