• Korean Journal of Human Ecology
• /
• v.11 no.4
• /
• pp.391-400
• /
• 2002

This study was intended to research the dyeing with natural walnut hull extracts over cotton, flax, rayon, wool, nylon and silk. We studied the dyeing conditions and mordant effect, and observed dyeability. The result are as follows: 1. In the dyeability with natural walnut hull extracts, protein and polyamide fiber has more dye uptake rather than cellulose fiber. 2. The optimum condition in the dyeing with natural walnut hull extracts was at $90^{\circ}C$, 12%(o.w.b) concentration in 90 mins. 3. In the case of the dyeability by repeated dyeing number, the dyeability of good dyeability fiber is improved in the first or second dyeing, but that of bad dyebality fiber is improved when it is dyed more repeatedly. 4. In the dyeablity treated with mordants, Al, Sn, and Mg don't have any differences, but Cu and Fe have some difference. The color of Fe mordant is green and the color of Cu mordant is blue. 5. In the case of the color fastness with mordant treatment, nylon is better than silk and wool in color fastness to washing but silk is better than nylon and wool in color fastness to light.

• Resources Recycling
• /
• v.3 no.3
• /
• pp.32-49
• /
• 1994

Hydration process is one of the basic carbonation system. Limestone sludge produced in Pohang Iron & Steel Co., Ltd. We tested for identify of hydration characteristics. The result obtained in this study can be summarized as follows; 1. The classify of limestone sludge is type of ground calcium carbonate(-3mm+325mesh)and the major mineral of calcite, and further more high grade(CaO 51%), fine powder(15~22$\mu\textrm{m}$). 2. Limestone sludge mixed two process sludge, first one is washing process sludge and the other one is wet collect kiln dust. The composition rate is about 8:2. Wet collect kiln dust is major mineral of calcite, too. But the sludge is assumed to one by quick lime, slaked lime and unreacted natural limestone. So, the ideal process is dividing of the washing process sludge and wet collect kiln dust. 3. We manufactured of slaked lime from limestone sludge. To investigate the effect of hydration reactor, the experiments was done with various reactor type as magnetic stirrer, shaking incubator and ultrasonic vibration reactor, respectively. Generally, ultrasonic vibration reactor is excellent hydration for limestone sludge and produced very fine slaked lime powder with ideal distribution. 4. The optimum condition is 10% pulp density, when the manufacture of fine slaked lime powder by ultrasonic vibration reactor. And hydration times to compare the results of the study with ultrasonic vibration reactor of generalized most short time(5~10 min). 5. Finally, the dispersive characteristics of slaked lime powder measured 1~5 $\mu\textrm{m}$ from limestone sludge were compared with those of natural limestone ones(10~20$\mu\textrm{m}$), in order to check applicability of slaked lime with hydration process from limestone sludge.

• Journal of Environmental Health Sciences
• /
• v.23 no.4
• /
• pp.82-90
• /
• 1997

This study was conducted to establish an ideal condition for obtaining maximum extraction efficiencies using an array of soil types and under a wide variety of conditions. Nine characteristic compounds were studied: benzene, toluene, ethylbenzene, o-xylene, m-xylene, p-xylene, n-propylbenzene, 1,2,4-trimethylbenzene, and n-butylbenzene which were found in gasoline. Increasing the moisture content resulted in decreased recovery, and recovery of hydrocarbons from wet soils was significantly lower than from dry soils. For the batch extraction process, 4 hours of extraction time was sufficient to give optimum recovery of the contaminants. With methanol as an extraction solvent, maximum recovery time appeared to be reached quicker for BTEX components than with 2-propanol. The 2 to 1 ratio of solvent/soil was chosen as a compromise to provide for the indicated minimum solvent use and high extraction efficiency. The 0.4 mg/g soil contamination was adequate to show quantitative recovery. The percent recovery of BTEX was concentration dependent more than the semivolatile compounds. Methanol and 2-propanol consistently gave higher efficiency than water. Methanol was superior to 2-propanol in removing contaminants from silty clay loam soil. Using the most efficient extraction procedure, the average recovery of the light hydrocarbons from the three soils was 66 percent. Recoveries were also dependent on soil type, solvent type, extraction time, solvent amount, contaminant concentration, and compounds volatility. This study provided a useful screening technique for procedures that can be used to remediate soils contaminated with light hydrocarbons.

• Journal of the Korean Applied Science and Technology
• /
• v.33 no.3
• /
• pp.483-491
• /
• 2016

Even though the antifogging property of nanosilica coated glass surface is highly increased due to the hydrophilic hydroxyl groups on nanosilica surface, the durability of this property on outdoor glass was diminished rapidly after rain washing. In addition the topology of nanosilica coated glass surface plays very important roles to control an light transmittance or antireflection property. To improve these coating durability and characteristics a hydrophilic nanosilica coating on glass was prepared by coating with 1.5 wt% of nanosilica (Ludox) suspension in the presence of hydrolyzed tetraethylorthosilicate (TEOS). The optimum hydrolysis condition of TEOS in acidic or basic aqueous solution was also examined by contact angle measurement. The final transparent hydrophilic coating layer coated with nanosilica-TEOS in acidic condition (pH=4) showed much improved durability of hydrophilic surface as well as higher visible light transmittance than original uncoated glass by 2 % point.

• Textile Coloration and Finishing
• /
• v.16 no.3
• /
• pp.22-30
• /
• 2004

The polyester fabrics were treated with the chitosan with various solubility in optimized treatment condition. The treatment method was discussed to be a high functional finishing for the polyester fabric to obtain the high moisture absorption and anti-microorganism property by evaluating the effect of the chitosan purification method on the yield and anti-microorganism property of the chitosan. On the other hand, soluble polyurethane was added to the chitosan treatment solution and/or plasma pretreatment was done. The addition of soluble polyurethane give a high add-on ratio as well as a linen like effect of treated polyester fabric. The results were as follows: 1. In the treatment of polyester fabric by the chitosan solution, a soluble PU resin and low temperature plasma treatment were done to obtain high binding force between the fabrics and the chitosan. The add-on rate and the moisture absorption ratio of the fabrics treated with the chitosan-PU after treated with the plasma slightly increased more than those of the fabrics treated with the chitosan only. 2. Anti-static property of the fabrics treated with the chitosan decreased rapidly with increasing of the chitosan concentration. The washing fastness of the fabrics treated with the chitosan-PU after treated with the plasma was better than those of the fabrics treated with chitosan only. The wrinkle resistance of the treated fabrics decreased constantly with the concentration of the chitosan. The bending rigidity of the treated fabrics increased greatly. On the treatment of polyester fabric under optimum condition, the microorganism reduction rate kept above 90％ after 10times launderings. 3. As the polyester fabrics which has flat yam was used as a weft yams were treated with the chitosan-PU as give a functional finishing effects such as durability, moisture absorption, anti-static and anti- microorganism property. Treated polyester fabric showed a good functional finishing effect and a linen like property.

• Food Science and Preservation
• /
• v.14 no.6
• /
• pp.598-604
• /
• 2007

Process development and standardization are necessary in maintaining high hygienicquality of side dishes. Seasoned perilla leaves are a typical side dish needing process development. In this study the optimum condition for preparing seasoned perilla leaves was investigated experimentally. The best sensory quality was established by response surface methodology. The rinsing and washing method of preparing fresh perilla leaves was optimized to decontaminate the raw material and preserve the product in chilled storage. Washing and rising with 3% salt water reduced the aerobic bacterial count of perilla leaves to 0.55 (log CFU/g), while rinsing reduced the load from 8.08 to 4.27 (log CFU/g). The effect of rinsing method was maintained during subsequent storage of the prepared seasoned leaves at $10^{\circ}C$. There was no significant quality change in the product during chilled storage at $10^{\circ}C$. Soaking in 3% salt water for 1 min, followed by rinsing with tap water, contributed positively to the microbial quality, and is proposed as the optimal preparation method.

• Journal of Fashion Business
• /
• v.20 no.3
• /
• pp.119-132
• /
• 2016

Weighting of silk fabrics have long been practiced in silk fabric trading based on the primary consideration of price-weight, and secondary one of quality improvement in handle, luster, and drape properties. Recent trend of practicing weighting of silk fabrics is, however, focused on the improvement of the handle, luster, drape, and other properties. During the finishing processes of synthetic fiber, nylon, comprising amide structure, include the use of tannic acid, especially in the dyeing. A multitude of studies are being implemented in terms of improving fastness to washing, fastness to light of dyed nylon product, or the light fastness of nylon 6 itself. In this study, the effects of various tannic acid treatments on the physical properties related to the handle of nylon 6 and silk fabrics are examined and reviewed. The effects of treatment condition of the tannic acid, e.g., the concentration of the aqueous tannic acid solution, treatment time, and temperature were investigated. As the concentration of the aqueous solution of tannic acid increased, the bending rigidity values of the silk and nylon 6 fabrics increased. The treated fabrics felt stiff to the touch. Within the mild conditions of bending employed in the bending measurement of KES, nylon 6 treated fabric specimen exhibited a trend of improvement of bending resiliency within the range of small bending deformation. The weight of treated fabrics have all increased. The air-permeability values decreased as the treatment concentration increased. However, the decrease tendency of air permeability values may be alleviated by adjusting the fabric count during the tentering or expanding processes, either by tension adjustment or heat treatment. Optimum conditions of the treatment for nylon 6 are 1.25% tannic acid concentration, bath temperature of $85^{\circ}C$, pH 3.1, and those for silk fabric treatment are 1.25% tannic acid concentration, bath temperature of $85^{\circ}C$, pH 3.1. The treatment conditions will lead to the improvement in the properties of fabrics for summer.

• Fashion & Textile Research Journal
• /
• v.19 no.5
• /
• pp.620-625
• /
• 2017

In this study, the dyeing conditions(temperature, time, concentration) are changed from various conditions on wool fabrics by using corydalis tuber extract in order to develop new natural dyes. The purpose of this study is to improve the dyeability, color fastness, and functionality and to derive optimal dyeing conditions by comparing and analyzing the changes of K/S values and surface color by dyeing pH changes, mordant method, and mordant type. As a result of the experiment, the optimum dyeing condition of the wool fabrics is shown dyeing temperature:$80^{\circ}C$, dyeing time:90min, dyeing concentration:100%. The dyeability by pH variants of corydalis tuber extract indicates that K/S values is higher alkaline than acidic. The mordant method of corydalis tuber extract showed pre-mordant has high K/S values. In terms of color fastness, marked improvement has not been shown despite of mordant treatment on wool fabrics. In particular, color change of color fastness to washing, color fastness to light indicates the low fastness. In addition, the functionality such as antibacterial activities and deodorization can be given at dyeing with corydalis tuber extract thus it is expected to be applied to underwear or apparel products for the elderly and infirm and children with weak skin that required high functionality.

• KSBB Journal
• /
• v.18 no.2
• /
• pp.122-126
• /
• 2003

Multi-cycle chromatographic separation of Iysozyme from egg white was investigated. Multi-cycle chromatography was performed by repeated cycling(one cycle: resin equilibration, sample loading, washing, elution). Two types of cation exchange resins, Cellufine CM C-200 and Bio-rex 70, were used to determine the optimum condition for the separation of Iysozyme by multi-cycle chromatography. The resin was equilibrated in 20 mM Na-phosphate buffer(pH 7.0). Chromatograms of UV absorbance levels of every cycle were compared to confirm the eluting ability of Iysozyme in the two types of gel. Collected samples from eluting regions in every cycle were assayed by 15% SDS-PAGE.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.10 no.3
• /
• pp.27-36
• /
• 1986

The purpose of this study was, to estimate the detergency of commercial detergent and to examine the interrelationship between detergency and detergent characteristics, detergent concentration, fiber characteristics, and Rolling-up phenomenon which is the major removal mechanism of oily soil. A mixture of oleic acid-olive oil was used as oily soil. The detergency was estimated by analysis of oleic acid on cotton ana polyester fabrics before and after washing by means of liquid scintillation counting. The Rolling-up of oily soil from PET film was observed and change of contact angle and removal time were measured. The results were as follows ; 1. In the case of soaps and powder synthetic detergents, the optimum concentrations we-re about $0.2\~0.3\%$. And detergencies of liquid synthetic detergents were considerably low, and the detergency was continually increased up with increasing concentration to $0.5\%$, which seemed to be caused by the lower pH than that of soap and powder synthetic deter-gent solutions. 2. As the effect of external or internal fiber structure; the detergency of cotton was lower than that of polyester. 3. In the observation of Rolling-up, the contact angle increased and the Rolling-up time became shorter with increasing detergent concentrations ($0.05\~0.5\%$). And it was confirmed that detergency was increased with Rolling-up effect. In addition, the study on the actual laundry condition was studied using the questionaire. From the results, about $76\%$ of households used the concentration of detergent roughly or excessively and housewives were highly concerned on the recommended dose, but grade of practice were very low.