• 한국건축시공학회지
• /
• 제12권5호
• /
• pp.468-477
• /
• 2012

This study aimed to mix and test mortar incorporating activated Hwangtoh to improve the Hwangtoh brick bond strength of brick structures. To do this, the bond strength correlation of mortar was analyzed by means of materials and experiment factors and levels, and the optimum conditions were suggested after analyzing the physical properties of brick and the mix ratio of mortar and additive. Furthermore, the compressive strength and bond strength were found to be in inverse proportion, and in terms of the materials and mixing level, W/C ratio, substitution ratio of activated Hwangtoh, and fine aggregate grading were shown to have a considerable influence on the strength. In conclusion, the optimum mixing conditions to improve the bond strength are found to set W/C ratio at 65% and replacmenet ratio of activated Hwangtoh at 10%.

• 한국도로학회논문집
• /
• 제17권2호
• /
• pp.63-70
• /
• 2015

PURPOSES: As a part of our research into repair techniques for roads that have collapsed as a result of a natural disaster, this study set out to find the optimum mix proportion for gravels to be used to restore a damaged area. METHODS: This study considered flow and strength-development characteristics. The experimental variables were the W/C ratio, the usage of the admixture, the types of cement, and the quantity of fine aggregate over three different experimental stages. The compressive strength was measured at 12 hours, one day, three days, and seven days. RESULTS : The flow varied with the amount of fine aggregate and the use of a high-range water-reducing (HRWR) admixture. The compressive strength also varied with respect to the type of cement and the W/C ratios. The strength satisfied the expected requirement of 21 MPa after one day, provided the mix proportion was appropriate. CONCLUSIONS: A gravel-filling high-flow cement-based mortar exhibited strength and consistency with a W/C ratio in the range of 0.40 to 0.45, assuming the use of HRWR at 0.5 to 0.7% and a fine aggregate/cement ratio of 1.0 to 1.5.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2006년도 춘계 학술발표회 논문집(II)
• /
• pp.85-88
• /
• 2006

This study describes the optimum mix proportion of the high strength and self-compacting concrete placed in main structures of LNG above tank. This concrete requires high strength level about $60{\sim}80MPa$, low hydration heat, balance between workability and consistency without vibrating in the actual work. For this purpose, low heat portland cement and fly ash are selected and design factors including water-binder ratio, replacement ratio of fly ash are tested. As experimental results, low heat portland cement shows lower the confined water ratio than another cement type and the optimum replacement ratio of fly ash in order to improve properties of the binder-paste shows 10% by cement weight considering test results of the confined water ratio$({\beta}p)$. Also, flowability of the high strength and self-compacting concrete by using fly ash about $10{\sim}20%$ is improved. The replacement ratio of fly ash 10% and water-binder ratio $25{\sim}27%$ are suitable to the design strength 80MPa and cost, In case of the design strength 60MPa, the replacement ratio of fly ash and water-binder ratio show 20% and $25{\sim}30%$ separately. Based on the results of this study, the optimum mix proportions of the high strength and self-compacting concrete will be applied to the construction of LNG above tank as a new type.

• 한국건축시공학회지
• /
• 제20권2호
• /
• pp.113-121
• /
• 2020

본 연구는 국내에서 시공된 많은 수의 흙 포장 콘크리트의 경우는 강도저하, 내구성 저하 등이 문제점으로 제기된다. 따라서 본연구는 이를 해결하기 위하여 석회류 재료인 천연유기 석회와 고토석회 등의 폐기물을 활용하여 흙 포장 콘크리트의 경제성, 품질향상을 목적으로 흙 콘크리트의 경화재를 개발하고자 하였다. 즉, 석회류 재료를 고로슬래그 미분말과 조합하여 자극재로 사용하여, 기존의 경화재의 재료를 대체하여 천연유기석회(H), 고토석회(G)의 석회류 조합비를 0: 10~10 : 0 범위에서 검토하였다. 연구결과, 모르타르 배합비 1 : 3, 결합재 조성비의 경우 BSC 30 석회류 재료조합비율은 천연유기석회와 고토석회를 5: 5의 비율로 혼합할 경우 시멘트 모르타르의 품질 측면에서 양호한 개발품이 얻어짐을 확인할 수 있었다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2006년도 추계 학술발표회 논문집
• /
• pp.905-908
• /
• 2006

In this study examines physical and mechanical properties the use of domestic low grade meta-kaolin in light weight porous concrete. For this purpose light weight porous concrete incorporating low grade meta-kaolin admixture, was tested for tensile strength and acoustic characteristics. Checking tensile strength of cement and low grade meta-kaolin mixture was used to determine the optimum mix proportion of the low grade meta-kaolin admixture. In this paper sound absorbing material has been investigated by using the light weight porous concrete.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1998년도 가을 학술발표논문집(II)
• /
• pp.262-268
• /
• 1998

This research is to examine the selected method of optimal mixing proportion and cost analysis in the super flowing concrete. As confined water $ratio($\beta_p$)$ and K is introduced, itis to establish optimal mixing design of super flowing concrete according to the steps of paste, mortar and concrete. From paste and mortar test, it was led to $$\beta_p$$ and $K_p$satisfying the optimum condions depending on the kinds of binders. Then $$\beta_p$$ and $K_p$ is reflected to the mix condition of super flowing concrete. The result of test, the mix condition of super flowing concrete satisfied the quality performance of concrete with adjustment of additional rate of the superplasticizer. Besides, in case of design strength $350kg/\textrm{cm}^2$ of concrete, material cost in super flowing concrete is able to be reduced 5~16% in replacement of fly ash 30% in ordinary portland cement and slag cement.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2010년도 춘계 학술대회 제22권1호
• /
• pp.405-406
• /
• 2010

본 연구에서는 Bayesian 확률법을 이용한 성능기반형 배합설계방법(Perfomance Based Mixture Design, 이하 PBMD)을 고강도 콘크리트 배합설계에 활용하여 요구성능을 만족하는 고강도 콘크리트 배합비를 찾는 것을 목표로 하고 있다. 고강도 콘크리트의 여러 가지 재료 성능 변수들을 구하기 위해 수행한 여러 가지 실험들의 결과를 바탕으로 고강도 콘크리트 배합설계 시 PBMD 방법의 적용가능성에 대해 검토하였으며 지역에 따른 환경조건, 사용 가능한 재료, 적용 가능한 콘크리트생산기술 등을 고려하여 목표성능을 만족시키는 최적의 콘크리트 배합비를 구하는 과정을 PBMD 방법을 적용한 예제를 통해 나타내었다.

• 콘크리트학회논문집
• /
• 제23권4호
• /
• pp.487-494
• /
• 2011

이 연구에서는 알칼리 활성화 시멘트 모르타르에 대한 결합재로서 바텀애쉬의 적용성을 평가하였으며, 배합 구성에 따른 재료 특성 변화를 파악하기 위한 실험을 수행하였다. 바텀애쉬를 사용한 알칼리 활성화 시멘트 모르타르 실험에서는 물/바텀애쉬 비, 활성화제/바텀애쉬의 비, 수산화나트륨에 대한 규산나트륨의 비, 양생 온도, 바텀애쉬의 분말도를 주된 실험 변수로 하여 유동성과 강도 실험을 수행하였다. 그 결과, $60^{\circ}C$ 고온 양생을 할 경우에는 적절한 유동성과 함께 40 MPa 이상의 압축강도를 얻을 수 있음을 확인하였으며, $20^{\circ}C$ 상온 양생 시에도 초기 강도 발현은 매우 느리지만 재령 28일 강도 30 MPa 정도가 발현되었다. 또한 실험 결과로부터 바텀애쉬를 사용한 알칼리 활성화 시멘트 모르타르의 적정 최적 배합 범위를 도출하였으며, 이와 함께 실험 결과를 바탕으로 인공신경망 분석법을 적용하여 배합 구성 변화에 따른 유동성 및 압축강도의 변화를 예측하였다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2004년도 춘계 학술발표회 제16권1호
• /
• pp.584-587
• /
• 2004

This research investigates the rheological behavior and the confined water ratio of the cement paste and binder condition in order to predict mix design proportion of the high flowing concrete. The purpose of this study is to determine the optimum replacement ratio of binders including fly ash, and lime stone powder by the cement weight. For this purpose, belite cement, blast furnace slag cement and ordinary portland cement are selected. As test results, the confined water ratio shows the following range ; OPC>blast furnace slag cement>belite cement. Therefore, belite cement is proved very excellent cementitious materials in a view point of the flowability. The optimum replacement ratio of lime stone powder is shown over $30\%$ in case of belite cement and about $10\%$ in case of slag cement type. Also, the optimum replacement ratio of fly ash is shown $30\%$ by the cement weight considering the confined water ratio and deformable coefficient of the paste condition.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1998년도 가을 학술발표회 논문집(I)
• /
• pp.1-6
• /
• 1998

Recently, as to destruction and renovation of aged building, waste concretes have been reclaimed near foreshore and filled up underground. Recycling demolished concrete as aggregate helps to settle economic and environmental problems of obtaining superior aggregates from natural sources and to dispose waste concretes. An experimental study was carried out to investigate the strength characteristics of no-fine concrete containing recycled aggregates. The cement-aggregate weight ratios of 1: 5, 1: 6, 1: 7 and water-cement ratios of 30, 35, 40, 45% were chosen for the mix design of no-fine concretes. The compressive and splitting tensile strength at 7 and 28 days were measured for 12 different mixes. On the basis of test results, the optimum mix proportion of no-fine concrete containing recycled aggregates was determined and applied to the production of retaining wall block.