• 한국결정성장학회지
• /
• 제3권2호
• /
• pp.176-184
• /
• 1993

$Li_2O-Al_2O_3-SiO_2$계 유리조성에서, 특히 주결정상으로 $\beta$-spodumene을 석출시킬 수 있는 조성영역에서 $P_2O_5, TiO_2, ZrO_2$ 등을 첨가하여 용융한 후 소결법을 이용하여 이론밀도에 가까운 결정화 유리를 만들기 위한 최적 열처리 조건, 유리 분말의 입도 변화에 따란 영향과 그 때의 물성을 시차열분석, X-선 회절분석, 비중 측정, 열팽창 측정, 전자현미경 관찰 등을 통하여 연구하였다. $P_2O_5$를 첨가하여 소결법으로 결정화할 때 소결을 증진시키는 효과가 있었으며 9wt% 첨가한 경우가 가장 치밀한 것으로 나타났다. 최적의 열처리 조건은 $740^{\circ}C$에서 소결하여 치밀화를 시키고$ 950^{\circ}C$에서 결정화를 시켰을 때로서 상대밀도는 90% 이상이었으며 열팽창계수는 $-1{\times}10^{-7}/^{\circ}C$ 정도로서 부팽창인 것으로 나타났다.

• 상하수도학회지
• /
• 제14권1호
• /
• pp.45-53
• /
• 2000

The optimum operation of domestic wastewater treatment plant can give influence on operational cost and future expansion in Korea where has 93 operational domestic wastewater treatment plants. Also, the study on optimum operation can reduce operation cost and budget of municipalities whom have responsibility of wastewater treatment plant operation. In this study, 9 domestic wastewater treatment plants which can represent 93 plants in Korea have been selected and operational data are gathered. The collected data are inputted to computer simulator based on IAWQ's Activated Sludge Model No.1 and optimum operation methods are developed. Also, the electric power for aeration which has large portion of overall operation cost are calculated based on design and operation conditions and these are compared. In this study, it was found that design wastewater characteristics are 1.6 times higher than those of daily maximum except for E plant and that estimation methods for design wastewater characteristics have to be improved. Based on computer simulation, we found there is no need to operate all aeration tanks due to weak influent overall power for aeration can be reduced to about 43% of design one.

• International Journal of Air-Conditioning and Refrigeration
• /
• 제17권2호
• /
• pp.68-73
• /
• 2009

In this paper, a numerical study has been carried out to investigate the influence of volute geometries on the performance of a sirocco fan. In order to achieve an optimum volute design and explain the interactions between the different geometric configurations in the volute system, three-dimensional computational fluid dynamics and the 'design of experiment' method have been applied. Several geometric parameters, such as the volute expansion angle, the cut-off position and the bell mouth shape, are employed to improve efficiency and performance. $2^k$ factorial designs were performed to screen the most influential parameters and interactions, and showed that the cut-off position and the bell mouth shape are the most significant parameters. The optimum design was selected as a result of the response surface methodology, and effects of these parameters and their interactions were presented. From the results of computational analyses and experimental data, the performance and efficiency of the sirocco fan were successfully improved. Also, detailed effects of geometric variables of the volute system on the fan performance were discussed.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회B
• /
• pp.2642-2647
• /
• 2008

Starting characteristics of the axi-symmetric supersonic exhaust diffuser(SED) with a second throat are numerically investigated. Main purpose of this study is to predict theoretical starting pressure of STED using 1-D normal shock theory and to present the range of optimum starting pressure through parametric study with essential design parameters of STED influencing on starting performance. Renolds-Average Navier-Stokes equations with a standard ${\kappa}-{\varepsilon}$ turbulence model incorporated with standard wall function are solved to simulate the diffusing evolutions of the nozzle plume. Minimum(optimum) starting pressure difference of $20{\sim}25%$ between 1-D theory and experimental evidences validated from previous results[5] is also applied to predict those in this system. The analysis results indicate that dominant parameters for diffuser starting in this system is diffuser expansion ratio($A_d/A_t$), which has optimum value 120 and second throat area ratio($A_d/A_{st}$), which has optimum range $3.3{\sim}3.5$.

• 자원리싸이클링
• /
• 제8권4호
• /
• pp.3-10
• /
• 1999

생활하수처리장에서 발생하는 슬러지연소재(SA)에 정유공장의 폐촉매(RFCC)를 첨가시켜 제조하려는 실험.연구를 행하였다. SA만의 경우에는 $1250^{\circ}C$에서 열처리하였을 때 비중이 1.67인 골재를 얻을 수 있었으며, 부피팽창률은 승온속도에 큰 영향이 없었고 소성시간에 따라서는 다소 저하하는 경향을 보였다. SA에 RFCC를 10 wt% 첨가한 경우에 $1250^{\circ}C$에서 비중이 1.07인 경량골재를 얻을 수 있었으며 소성시간에 따라 부피팽창율이 다소 증가하였다. 경량골재를 제조하기 위한 최적 RFCC 첨가량은 10 wt%이었으며 최대 부피팽창율을 보인 조건은 승온속도; $20^{\circ}C/min$, 소성온도; $1250^{\circ}C$, 유지시간; 50분의 경우였다. RFCC의 첨가량에 따라 제조된 시편의 압축강도는 30 wt% RFCC>SA>20 wt% RFCC>10 wt% RFCC의 경향을 보였다.

• 소성∙가공
• /
• 제21권3호
• /
• pp.207-214
• /
• 2012

High temperature deformation behavior of a $Ni_{30}Fe_{53}Co_{17}$ alloy, with its extraordinary low coefficient of thermal expansion less than $10{\times}10^{-6}K^{-1}$ at temperatures ranging from room temperature to 673K, was investigated by conducting a series of compression tests. From an empirical processing map, the appropriate working temperature-strain rate combination for optimum forming was deduced to be in the ~1373K, $10^{-2}s^{-1}$ region. This region has a relatively high power dissipation efficiency, greater than 0.36. Furthermore, open die forging of a 100mm diameter billets was performed to confirm the variation of thermo-physical properties in relation to microstructure. The coefficient of thermal expansion was found to increase considerably with increasing the open die forging temperature and decreasing the cooling rate, which in turn provides a drastic increase in the average grain size.

• 한국세라믹학회지
• /
• 제13권2호
• /
• pp.31-38
• /
• 1976

Korean tremoitic talc, wollastonite and clay have been used to develop a wall tile body to appropriate to the fast firing process. Some of ceramic properties of the raw materials were investigated by X-ray diffraction, thermal analysis and chemical analysis. The body compositions were formulated from the range of 35~75% tremolitic talc, 0~30% wollastonite and 25~35% plastic clay. Thermal gravity analysis and thermal expansion were tested for each of unfired bodies to study the correlation between thermal dehydration and linear shrinkage during the firing procedure. Linear shrinkage and water absorption of the fired bodies at the various temperature were taken as a measures for determining the proper firing range of the bodies. Increasing the content of wollastonite and firing temperature, the thermal expansion of the fired body showed the gradual decrease, and the thermal expansion curves showed a tendency to straighten. These observations may be resulted from the fact that the amounts of diopside and anorthite formed were gradually increased and those of quartz relatively decreased. The optimum compositions of the wall tile bodies for fast firing are 30% clay, 10~20% wollastonite and 50~60% tremolitic talc.

• 설비공학논문집
• /
• 제28권11호
• /
• pp.428-433
• /
• 2016

The fin and tube heat exchanger using a two-port tube has in air-conditioner heat exchanger because heat transfer performance. This study investigates the feasibility of a fin and tube heat exchanger using two-port copper tube by mechanical expansion. The optimum size of the tube-expanding bullet for the heat exchanger using two-port tube was through numerical calculation. The heat exchanger using a two-port tube was fabricated by mechanical expansion, and the heat exchanger performance was evaluated condensation and evaporation experiments. Compared to the heat exchanger of a conventional circular tube, the pressure drop per unit length of the heat exchanger with a two-port tube decreased. Compared to the heat exchanger using a conventional circular tube, the overall heat transfer coefficient of heat exchanger with a two-port tube increased up to 13% in the case of condensation, and up to 25% in the case of evaporation. The two-port tube heat exchanger outperforms conventional heat exchanger for air conditioner with a inner grooved circular tube.

• International Journal of Air-Conditioning and Refrigeration
• /
• 제12권4호
• /
• pp.192-197
• /
• 2004

A capillary tube, which is a common expansion device in small sized refrig-eration and air-conditioning systems, should be redesigned properly to establish an optimum operation cycle of a refrigerating system with alternative refrigerants. Based on experimental data for R-22, R-290, and R-407C, an empirical correlation is developed to predict mass flow rate through capillary tubes. Dimensionless parameters are derived from the Buckingham Pi theorem, considering the effects of operating conditions and capillary tube geometry on mass flow rate. Approximately $97\%$ of the present data are correlated within a relative deviation of $\pm\;10\%.$ The present correlation also predicts the data obtained from open literature within $\pm\;15\%.$ In addition, rating charts of refrigerant flow rate for R-12, R-22, R-134a, R-152a, R-407C, R-410A, R-290, and R-600a are developed.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2000년도 춘계학술대회논문집
• /
• pp.71-77
• /
• 2000

An axisymmetric supersonic jet is simulated at a Mach number of 1.5 and a Reynolds number of $10^5$ to identify the mechanism of sound radiation from the jet. The present simulation is performed based on the high-order accuracy and high-resolution ENO(Essentially Non-Oscillatory) schemes to capture the time-dependent flow structure representing the sound source. In this simulation, optimum expansion jet is selected as a target, where the pressure at nozzle exit is equal to that of the ambient pressure, to see pure shear layer growth without effect of change in jet cross section due to expansion or shock wave generated at nozzle exit. Shock waves are generated near vortex rings, and discernible pressure waves called Mach wave are radiated in the downstream direction with an angle from the jet axis, which is characteristic of high speed jet noise. Furthermore, vortex roll-up phenomena are observed through the visualization of vorticity contours.