• 한국농공학회:학술대회논문집
• /
• 한국농공학회 1998년도 학술발표회 발표논문집
• /
• pp.99-106
• /
• 1998

A study was conducted to develope a system for optimum design, safe appraisal and repair works on agricultural structures. Locations of structures were identified using GPS and imbedded into GIS data base with related information. A graphical program assisting ensile field investigation of typical agricultural structural problems such as fractures and cracks of members was developed. Typical rehabilitation methods were coded for data base development. Optimum design programs for several structures were developed and CAD program which automatically draw draft was also developed.

• Computers and Concrete
• /
• 제13권4호
• /
• pp.547-567
• /
• 2014

Precast Seismic Structural Systems (PRESSS) provided an iterative procedure for obtaining optimum design of unbonded post-tensioned coupled precast concrete wall systems. Although PRESSS procedure is effective, however, it is lengthy and laborious. The purpose of this research is to employ Artificial Neural Network (ANN) to predict the optimum design parameters for such wall systems while avoiding the demanding iterative process. The developed ANN model is very accurate in predicting the nondimensional optimum design parameters related to post-tensioning reinforcement area, yield force of shear connectors and ratio of moment resisted by shear connectors to the design moment. The Mean Absolute Percent Error (MAPE) for the test data for these design parameters is around %1 and the correlation coefficient is almost equal to 1.0. The developed ANN model is then used to study the effect of different design parameters on wall behavior. It is observed that the design moment and the concrete strength have the most influence on the wall behavior as compared to other parameters. Several design examples were presented to demonstrate the accuracy and effectiveness of the ANN model.

• 대한원격탐사학회지
• /
• 제2권1호
• /
• pp.49-54
• /
• 1986

This study has been intended to design an optimum meteorological information system appropriate for Korea as a part of 5 year development plan. The 5 year plan was that to set up new direction in order to modernize meteorological data acquisition, processing and information distribution. The detailed research has been led to presentation of optimum meteorological information system of Korea eventually, selecting the computerization of communication as the primary object of modernization. In the study, research concerning effective equipment configuration, data communications internal as wall as external, and the related implementations has been carried out with the approach of system component consideration under system application design. As tile results of the study, integrated network of meterorological data communication was presented including earth quakes, radar, aerologic, marine weather observations and so on.

• 대한조선학회지
• /
• 제21권4호
• /
• pp.29-39
• /
• 1984

In this paper, the membrane and buckling analysis of beams with various shaped brackets is performed by using the finite element method. From the viewpoint of minimum structural weight, a optimum design method to determine the optimal shapes and scantling of brackets under design load is proposed by investigating the effects of beam depth, bracket length and aspect ratio on the structural weight. Also optimal design data and charts for the brackets to support transverse girders or web frames of actual ships are provided. By the present design method, it is possible to perform optimum design of brackets used in actual ships, which could result in considerable reduction of structural weight or cost, increase of dead weight and service speed of ships.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2005년도 추계학술대회 논문집
• /
• pp.488-493
• /
• 2005

Railload line design of the railroad construction project should be planed considering the variety of quantitative and qualitative factors, and needs to be selected the optimum altinative weighing from VE/LCC analysis of the planned design. The purpose of this research is for showing selecting plan of the optimum railload line and railway bridge applying VE/LCC analysis in selecting the optimum altinative of railroad construction based on quantitative and qualitative factors, such as initial construction cost, maintenance cost, owner and user's requirements. In this research showed the application plan by each stage using data analysis, function analysis, and alternative evaluation of VE/LCC analysis with AHP and LCC analysis program for the selection. This research is proved the rationality and application of the course of selecting the optimum alternative through case application

• 한국통신학회논문지
• /
• 제19권8호
• /
• pp.1421-1432
• /
• 1994

본 논문에서는 비코히어런트 방식의 시간분할 조만 동기추적루프에 속하는 타우진동루프의 최적 설계를 위한 대역통과필터의 대역폭에 대하여 고찰하였다. NRZ 데이터의 경우 이상적 대역통과 필터를 채용한 비코히어런트 TDL의 제곱손실 및 최소의 동기추적지터를 구하였다. 또한 이를 이용하여 최적의 3dB 대역통과필터 대역폭을 주어진 데이터율과 데이터 신호대잡음비에 대해 계산하였다. 결과로서 이상적 대역통과 필터의 경우 최적의 대역폭은 주어진 신호대잡음비에 따라 데이터율의 약 1-2배의 범위 내에 존재함을 알 수 있었다.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1988년도 가을 학술발표회 논문집
• /
• pp.55-60
• /
• 1988

This paper concentrates on the development of simplified and effective algorithm for optimum reinforced concrete(RC) member design. After constructing the data base of predetermined RC sections which are arranged in the order of increasing resistant capacity. Then, the relationship between the section identification numbers and resistant capacities of sections is estabilished by regression and it can be used to obtain the initial solution(section) which satisfies the design constraints imposed. Assuming that there exists the optimum section near the initially selected one, the direct search is conducted to find the discrete optimum solution. The optimization of the entire structure is accomplished through the individual member optimization.

• International Journal of Air-Conditioning and Refrigeration
• /
• 제13권2호
• /
• pp.71-82
• /
• 2005

The shape of $7\times7$ pin-fins heat sink is optimized numerically to obtain the minimum pressure drop and thermal resistance. In this study, the fin height (h), fin width (w), and fan-to-heat sink distance (c) are chosen as the design variables and the pressure drop $({\Delta}P)$ and thermal resistance $(\theta_j)$ are adopted as the objective functions. To obtain the optimum design values, we used the finite volume method for calculating the objective functions, the BFGS method for solving the unconstrained non-linear optimization problem, and the weighting method for predicting the multi-objective problem. The results show that the optimum design variables for the weighting coefficient of 0.5 are as follows: W=4.653 mm, h=59.215mm, and c=2.667mm. The objective functions corresponding to the optimal design are calculated as ${\Delta}P=6.82$ Pa and $(\theta_j)=0.56K/W$. The Pareto solutions are also presented for various weighting coefficients and they will offer very useful data to design the pin-fins heat sink.

• 한국기계가공학회지
• /
• 제2권3호
• /
• pp.76-83
• /
• 2003

Recently, the field of the engineering has been studied about optimum design continuously. Verified data by comparison with simulation and dynamic characteristic analysis enables the design of a machine tool to be modified easily and effectively concerning to the mode shape of the vibration. Especially, BC-500 Line Center has got some problems causing vibration which mainly come from Column and ATC part. So it is necessary to solve those problems by the two kinds of method such as changing structural design and reinforcing with ribs. In this paper, column and ATC part of BC-500 Line center are modified by an optimum design by the analysing method of FEM to avoid vibration. As a result, a more stable machine tool was designed by this simulation as optimum condition.

• 한국CDE학회논문집
• /
• 제10권2호
• /
• pp.114-120
• /
• 2005

This paper presents a novel method for radius measurement of fillet regions of polygonal models by using optimum onhogonal planes. The objective function for finding an optimum onhogonal plane is designed based on the orthogonality between the normal vectors of the faces in a filet region and the plane that is to be found. Direct search methods are employed to solve the defined optimization problem since no explicit derivatives of the object function can be calculated. Once an optimum orthogonal plane is obtained, the intersection between the onhogonal plane and the faces of interest is calculated, and necessary point data in the fillet region for measuring radii are extracted by some manipulation. Then, the radius of the fillet region in question is measured by least squares fitting of a circle to the extracted point data. The proposed radius measuring method could eliminate the burden of defining a plane for radius measurement, and automatically find a necessary optimum orthogonal plane. It has an advantage in that it can measure fillet radii without prior complicated segmentation of fillet regions and explicit information of neighboring surfaces. The proposed method is demonstrated trough some mea-surement examples.