• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2009년도 세계 도시지반공학 심포지엄
• /
• pp.412-419
• /
• 2009

Large quantity of extra soils discharged from excavation site in Songdo area can be treated by hardening agents and utilized in surface stabilized layer overlying thick reclaimed soft soil deposit. Though surface layer stabilization method using cement or lime for very soft soils has been studied in recent years, but studies on moderately soft clayey silt has not been tried. The purpose of this research is to investigate optimum mixing condition for stabilizing Songdo marine soil with low plasiticity. The optimum mixing conditions of hardening agents with Songdo soil such as kind of agents, mixing ratio, initial water content and curing time are investigated by uniaxial compression test and laboratory vane test. The results indicate that strength increases with high mixing ratio and long curing time, while decreases drastically under certain water content before mixing. Finally, optimum mixing condition considering economic efficiency and workability with test results was proposed.

• 한국농공학회지
• /
• 제43권6호
• /
• pp.135-142
• /
• 2001

Laboratory experiment was performed to evaluate the influence of mixing conditions to the strength of solidified sandy soils with cement. The major physical factors considered in this experiment were the fine particles content(<$\sharp200%$), cement content(%) and water-cement ratio, and unconfined compressive strength test was performed on the samples at 7 and 28 cured day. The results of tests shows that when the cement content is relatively low (7~10 percents) the fine content in the sandy soils is very important, but when cement content is high the water-cement ratio became more important. It was appeared that in the range of the cement content of 7~10 percents, about 20~30 percents of fine content to the total sample weight is the optimum condition to get the maximum strength. In the case of the cement content of 13 percents, the strength of sample was considerably affected by the water-cement ratio rather than the fine content. In this paper, empirical equations were also developed and evaluated to verify the relationship among three factors by the multi-regression analysis.

• 한국도로학회논문집
• /
• 제18권6호
• /
• pp.105-113
• /
• 2016

OBJECTIVES : This study is to develop the optimum mixing proportions for cement concrete pavement with using recycled aggregates. METHODS : The mixture varied recycled coarse aggregates content from 50 % to 100 % to replace the natural coarse aggregates by weight. Tests for fundamental properties as a cement concrete pavement were conducted before and after hardening of the concrete. RESULTS : It was found that the variation in the amount of the recycled aggregate affected the compressive and flexural strength development, as well as the chloride ion penetration resistance. As the amount of the recycled aggregate content increased the compressive and flexural strength and the resistance to chloride ion penetration decreased. However, the resistance to freeze-thaw reaction was affected significantly. In addition, the gradation of the aggregate became worse and hence so did the coarseness factor as the recycled aggregate amount increased. CONCLUSIONS : The fundamental properties of the concrete with recycled aggregate does not seem to be appropriate when the recycled aggregate quality is not guaranteed up to a some level and its replacement ratio is over 50%. The optimized gradation of the aggregates should also be sought when the recycled aggregate is used for the cement concrete pavement materials.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2008년도 추계 학술발표회 제20권2호
• /
• pp.593-596
• /
• 2008

콘크리트의 블리딩은 재료분리의 일종으로서 콘크리트 품질뿐만 아니라 내구성을 저하시키는 원인으로 작용한다. 본 연구에서는 콘크리트 블리딩에 영향을 미칠 것으로 예상되는 시멘트 및 믹싱시간의 두 요인의 변화에 따른 특성을 파악하여 블리딩 제어기술 확보를 위한 기초자료를 제공하고자 한다.연구결과에 의하면, 믹싱시간이 증가할수록 블리딩율도 증가하는 추세를 나타내고 있었다. 블리딩양(믹싱시간 90초)은 시멘트 특성에 의한 차이가 뚜렷하게 나타나고 있었으며, 콘크리트 특성값(블리딩율, 슬럼프 및 재령 3일 압축강도)은 믹싱시간과 비례적인 관계가 있었다. 또한, 슬럼프 손실율과 믹싱시간은 반비례적인 관계가 존재하였고, 압축강도값은 초기재령에서만 믹싱시간에 의한 영향을받고 있었다.향후, 최적 믹싱시간 도출을 위한 다양한 검토가 필요할 것으로 판단된다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2004년도 추계 학술발표회 제16권2호
• /
• pp.537-540
• /
• 2004

Recently, for industrial development period, concrete structures in domestics have been increased. They were deteriorated by attack of carbonation, freeze-thaw and corrosion etc. In hence they were demolished and reconstructed, resulted in waste concrete particles. In this paper, waste concrete particles (WCP) by product from different crushing and selecting process were used in soil cement-based pavement in the various recycling. For using WCP in soil cement-based pavement, the Qualities, physical and chemical properties, of WCP should be researched. In the first step, the specified compressive strength of mortar for two types of clay sand soil and clay soil respectively was experimented to be 15 Mpa and then optimum mixing ratio of chemical solidification agent were decided in the range of $1.5\~3.0\%$ in the replacement with cement weight content. In the second step, based on the prior experimental results, recycling possibility of WCP in soil cement-based pavement was studied. In the result of experiment the mixing ratio of WCP were 5, 10, 15 and $20\%$ in the replacement with soil weight and the compressive strength of mortar was somewhat decreased according to the increase of the mixing ratio of WCP.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1996년도 가을 학술발표회 논문집
• /
• pp.283-289
• /
• 1996

In this paper, the mix design of the super flowing concrete is described with respcet to basic concept, confined water ratio($\beta_p$), volume ratio of water-binder(w/b), volume ratio of fine aggregates($S_r$) and coarse aggregates($G_v$). The primary purposes of this study are to evaluate the effects of cementitious materials(fly ash, slag cement, portland cement), mixing factors ($\beta_p$, w/b, $S_r$, $G_v$)., and to propose the mix design method of the super flowing concrete. As results of this study, confined water ratio($\beta_p$) of cementitious materials is very high (0.99~1.1), and then the ranges of the optimum mixing factors to be satisfied with the super flowing concrete are $S_r$ 47$\ell$ 2%, $G_v$ 52$\ell$ 1%.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2008년도 춘계 학술발표회 초청강연 및 논문집
• /
• pp.1051-1060
• /
• 2008

The use of the coal ash for surcharge material, in a view of the environmental aspect, can decrease amount of the reclamation through recycling waste materials as well as prevent a destruction of the ecosystem attributed to sand picking. In addition, it can reduce both unit cost of material and construction expenses. In this study, new construction material as alternative surcharge material using coal ash, which is by-product from thermoelectric power plant, were developed. Mixing ratios of fly ash and bottom ash derived from the coal ash in Samchunpo thermoelectric power plants were determined. Furthermore, mixing conditions depending on the ratios of the cement and gypsum used for chemical additive were determined too. Uniaxial compression strength tests were conducted at different mixing conditions and Design graph of optimum mixing ratio at each required strength for economic efficiency is indicated in this paper.

• 콘크리트학회논문집
• /
• 제29권3호
• /
• pp.315-322
• /
• 2017

본 연구는 결합재에 따른 자기충전 콘크리트의 현장 최적배합비의 선정 및 이에 따른 현장 시공성과 경제성을 평가하기 위한 것이다. 결합재로 슬래그 함량이 46.5%인 슬래그계와 $C_2S$함량이 51.4%인 벨라이트계, 그리고 석회석 미분말이 사용되었다. 물-시멘트비를 대상으로 유동성, 충전성, 재령별 압축강도를 측정하여 현장 최적배합조건을 선정하였으며, 이에 따른 평가항목으로 응결시간, 블리딩, 침하깊이, 단열온도 상승시험을 실시하였다. 현장 시공성 및 경제성 평가를 위하여 현장시공에 따른 콘크리트 물량과 재료비를 분석하였다. 실험결과, 유동성 및 압축강도에 만족하는 물-시멘트비는 슬래그계 41.0%, 벨라이트계 51.0%이며, 응결시간 및 블리딩량 종료시간은 슬래그계가 빨랐지만, 블리딩량은 슬래그계가 큰 것으로 나타났다. 단열온도 상승량 및 상승속도는 벨라이트계가 낮은 것으로 나타났다. 또한 배처 플랜트의 최적 배합시간은 75초가 적합하였으며 생산량은 $100{\sim}110m^3/hr$이었다. 재료비 및 콘크리트 물량에서 벨라이트계가 슬래그계보다 각각 14.0% 및 3.3% 절감되는 것으로 나타났기 때문에, 재령별 압축강도 발현을 제외하면 벨라이트계 자기충전 콘크리트가 시공성 및 경제성 등에서 우수하였다.

• 한국건설순환자원학회논문집
• /
• 제8권2호
• /
• pp.153-160
• /
• 2020

본 연구에서는 이산화탄소 포집광물을 심층혼합처리용 Soil-cement로 활용하기 위하여 최적 Soil-cement의 배합비를 도출하였으며, 이산화탄소 포집광물이 혼합된 Soil-cement의 품질특성을 평가하였다. 이산화탄소 포집광물은 슬러리 형태로 발생되며, 함수량 평가결과, 약 50%로 나타났다. 따라서, Soil-cement의 배합시 단위수량에서 이산화탄소 포집광물의 함수량을 제외하였다. 이산화탄소 포집광물 활용 Soil-cement를 현장토에 대하여 현장배합을 실시한 결과 재령 28일 기준 3.0MPa 이상을 나타냄으로써 설계 허용지지력 기준을 만족하는 것으로 나타났다. 이산화탄소 포집광물의 유해성 검증을 실시한 결과 구리(Cu)의 경우 0.055mg/L 검출되었지만 허용기준치에 만족하였으며, 이 외의 유해 물질은 용출되지 않은 것으로 분석되었다.

• 한국구조물진단유지관리공학회 논문집
• /
• 제23권6호
• /
• pp.53-60
• /
• 2019

이산화탄소 농도가 높은 도심지의 경우 탄산화로 인한 철근부식이 발생하기 쉬우며 이는 콘크리트 구조물의 내구수명을 감소시킨다. 콘크리트 구조물의 경우 다양한 구속조건을 가지며 항상 외부의 재하하중을 받고 있다. 도입된 응력수준은 이산화탄소와 같은 유해인자의 확산을 변화시키며 탄산화 깊이의 변동성을 야기한다. 본 연구에서는 응력재하수준에 따른 탄산화 변동성을 정량화하였으며, 이를 이용하여 탄산화 예측식을 도출하였다. 내구성 설계인자인 피복두께, 이산화탄소 확산계수, 탄산화 반응 수화물, 그리고 외부 이산화탄소 농도를 확률변수로 정의하였으며, MCS을 통하여 영향인자의 변동성에 따른 내구수명을 도출하였다. 또한 응력수준에 따라 변화하는 내구수명을 도출하였으며, 이를 결정론적인 방법의 결과와 비교하였다. 피복두께 및 내부 수화물 생성이 내구수명 변동성에 가장 큰 영향을 미쳤으며, 응력수준을 고려한 내구수명평가는 유지관리 우선순위 설정에 합리적으로 적용할 수 있다.