• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.31 no.6D
• /
• pp.867-874
• /
• 2011

The ballast abrasion occurs on the ballasted track upon bridges more than soil roadbed because the track vibration occurs a lot in the ballasted track upon bridges due to girder vibration when a train's weight is loaded onto track even though the identical ballast is used. The phenomena of mud pumping especially, which occurs when drainage is not properly secured for heavy rain, leads to the increase of maintenance work load and the decline of ride comfort. The ballast thickness range in domestic railroad construction rule is uniformly set up according to the design speed of railroad and passing tonnage of train without considering field conditions which is considered in foreign railroad companies. The purpose of this study is to verify the effect of vibration decrease by measuring the acceleration, displacement and ride comfort of ballasted track with the change of ballast thickness on the ballast tracked bridges and to suggest the optimal height of ballast on the Yocheon Bridge built for the test in Honam Line.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.38 no.8
• /
• pp.671-676
• /
• 2014

The vortex cup is proposed as a method to transport sensitive products such as silicon wafers in manufacturing. Air through the inlet nozzle located at the top of the vortex cup flows to form a swirl in the cylinder. The flow located in the lower part of the thin gap between the vortex cup and the bottom surface escapes and generates a negative pressure that can lift objects. In this research, three-dimensional numerical simulation of the air flow field in a vortex cup is performed, and a comparison of the simulation and experimental results shows very good agreement. In addition, the vortex cup length and shape that affect the negative pressure were applied to the analysis. Through the simulation results, optimum conditions for the vortex cup shape were proposed.

• Applied Chemistry for Engineering
• /
• v.29 no.3
• /
• pp.325-329
• /
• 2018

In this study, polyphenols were extracted from Angelica, which are known to have a high antioxidant content and the extraction process was optimized using the response surface methodology. The extraction yield and the total polyphenols were set as response values for the methodology. Quantitative factors in the extraction process were the extraction time, volume ratio of alcohol/ultrapure water, and extraction temperature. When considering both the main and interaction effects, the greatest influence factor on the extraction yield and total polyphenols was the extraction time. The optimum extraction time and temperature and alcohol/ultrapure water volume ratio for angelica were 2.8 h, $56.6^{\circ}C$ and 64.0 vol% respectively. The extraction yield and total polyphenols when using the conditions were calculated to be 24.6% and 8.76 mg GAE/g. respectively. Determination coefficients of regression equations for the extraction yield and total polyphenols were 81.4 and 75.4%, respectively. Also the overall satisfaction level was found to be 0.80 and the significance was confirmed within 5%.

• Journal of Biosystems Engineering
• /
• v.41 no.1
• /
• pp.21-33
• /
• 2016

Purpose: In order to ensure that vegetable seedlings (with a soil block around their roots) are planted in an upright orientation after metering in a vegetable transplanter, they need to be dropped freely from a certain height. The walk-behind hand-tractor-powered machines do not have sufficient space to drop the seedlings from that height. In the present work, a hopper-type planting device was developed for the walk-behind hand-tractor-powered vegetable transplanter to ensure that the soil block seedlings are planted in an upright orientation. Methods: Various dimensionless terms were developed based on the dimensional analysis approach, and their effect on the planting of soil block seedlings in an upright orientation (planting efficiency) was studied. The optimum design dimensions of the hopper-type planting device were identified by the Taguchi method of optimization. Results: The ratio of the height of free fall to the sliding distance of the seedling on the surface of the hopper had the highest influence on planting efficiency. The planting efficiency was highest for plants with a height $15{\pm}2cm$. The plant handling Froude number, in interaction with the design of the hopper-type planting device, also significantly affected the planting efficiency. Of the hopper design factors, the length of the slide of the seedlings on the surface of the hopper was most important, and induced sufficient velocity and rotation to cause the seedling to fall in an upright orientation. An evaluation of the performance of the planting device under actual field conditions revealed that the planting efficiency of the developed planting device was more than 97.5%. Conclusions: As the seedlings were fed to the metering device manually, an increase in planting rate increased missed plantings. The planting device can be adopted for any vegetable transplanter in which the seedlings are allowed to drop freely from the metering device.

• Analytical Science and Technology
• /
• v.30 no.4
• /
• pp.174-181
• /
• 2017

Bio-liquid is a liquid by-product of the hydrothermal carbonization (HTC) reaction, converting wet biomass into solid hydrochar, bio-liquid, and bio-gas. Since bio-liquid contains various compounds, it requires efficient sampling method to extract the target compounds from bio-liquid. In this research, fatty acid methyl ester (FAME) in bio-liquid was extracted based on hollow fiber supported liquid phase microextraction (HF-LPME) and determined by Gas Chromatography-Flame Ionization Detector (GC-FID) and Gas Chromatography/Mass Spectrometry (GC/MS). The well-known major components of biodiesel, including methyl myristate, palmitate, methyl palmitoleate, methyl stearate, methyl oleate, and methyl linoleate had been selected as standard materials for FAME analysis using HF-LPME. Physicochemical properties of bio-liquid was measured that the acidity was 3.30 (${\pm}0.01$) and the moisture content was 100.84 (${\pm}3.02$)%. The optimization of HF-LPME method had been investigated by varying the experimental parameters such as extraction solvent, extraction time, stirring speed, and the length of HF at the fixed concentration of NaCl salt. As a result, optimal conditions of HF-LPME for FAMEs were; n-octanol for extraction solvent, 30 min for extraction time, 1200 rpm for stirring speed, 20 mm for the HF length, and 0.5 w/v% for the concentration of NaCl. Validation of HF-LPME was performed with limit of detection (LOD), limit of quantitation (LOQ), dynamic range, reproducibility, and recovery. The results obtained from this study indicated that HF-LPME was suitable for the preconcentration method and the quantitative analysis to characterize FAMEs in bio-liquid generated from food waste via HTC reaction.

• Journal of Animal Science and Technology
• /
• v.53 no.3
• /
• pp.253-259
• /
• 2011

The aim of this work was to determine the method and predict the optimum conditions for egg quality stored for 7 days when combination treatments of irradiation and chitosan coating were applied using response surface methodology (RSM). A central composite design was chosen for the RSM in this study and the factors were irradiation dose (0~2 kGy) and concentration of chitosan coating material (0~2%). Performance of the irradiation and chitosan coating were evaluated by analyzing the egg quality and functional property factors. The predicted maximum level of Haugh units and foaming ability calculated by a developed model were 74.19 at 0 kGy of irradiation with coating by 0.96% chitosan solution and 50.83 mm at 2.0 kGy with 1.01%, respectively. The predicted minimum value of foam stability and 2-thiobarbituric acid reactive substances (TBARS) value were 2.97 mm at 0.39 kGy with 0.21% and 0.54 mg malonaldehyde/kg egg yolk at 0 kGy with 0.90% of chitosan solution, respectively. Results clearly showed that gamma irradiation negatively affected the Haugh unit and TBARS but positively affected the foaming capacity. The estimated value from the developed model by RSM was verified by no statistical difference with observed value. Therefore, RSM can be a good tool for optimization and prediction of egg quality when 2 or more treatments are combined. However, one should decide the target quality first to achieve a successful implementation of this technology.

• Korean Journal of Food Science and Technology
• /
• v.37 no.3
• /
• pp.431-437
• /
• 2005

Overall experiments were planned by central composite design, and results were analyzed by response surface methodology (RSM) to determine effects of three independent variables, temperature ($X_{1}$), extraction time ($X_{3}$), and pressure ($X_{3}$), on yield of sesame oil extract (Y). Regression equation model optimized by response surface analysis was: Y (sesame oil) = $-3.89+0.07X_{1}+0.03X_{2}+0.0006X_{3}-0.0007X_{1}^{2}-0.0002X_{2}X_{1}-0.00008X_{2}^{2}+0.000004X_{3}X_{1}+0.0000009X_{3}X_{2}-0.00000009X_{3}^{2}$. According to RSM analysis, optimum extracting conditions of temperature, time, and pressure were $45.89^{\circ}C$, 131.89 min, and 34228.41 kPa, respectively, and statistical maximum yield of sesame oil was 96.27%. Fatty acid composition of sesame oil showed sesame oil extracted by Supereritical Fluid $CO_{2}$ contained lower levels of palmitic, stcaric, and oleic acids and higher levels or palmitoleic and linoleic acids than commercial sesame oil. Commercial and extracted sesame oils were analyzed by electronic nose composed of 12 different metal oxide sensors. Obtained data were interpreted by statistical method of MANOVA. Sensitivities of sensors from electronic nose were analysed by principal component analysis. Proportion of first principal component was 99.92%. All sesame oils showed different odors (p < 0.05).

• 한국신재생에너지학회:학술대회논문집
• /
• 2008.05a
• /
• pp.479-482
• /
• 2008

Since late of 2000, KIER has developed a novel pyrolysis process for production of fuel oils from polymer wastes. It could have been possible due to large-scale funding of the Resource Recycling R&D Center. The target was to develop an uncatalyzed, continuous and automatic process producing oils that can be used as a fuel for small-scale industrial boilers. The process development has proceeded in three stages bench-scale unit, pilot plant and demonstration plant. As a result, the demonstration plant having capacity of 3,000 tons/year has been constructed and is currently under test operation for optimization of operation conditions. The process consisted of four parts ; feeding system, cracking reactor, refining system and others. Raw materials were pretreated via shredding and classifying to remove minerals, water, etc. There were 3 kind of products, oils(80%), gas(15%), carbonic residue(5%). The main products i.e. oils were gasoline and diesel. The calorific value of gas has been found to be about 18,000kcal/$m^3$ which is similar to petroleum gas and shows that it could be used as a process fuel. Key technologies adopted in the process are 1) Recirculation of feed for rapid melting and enhancement of fluidity for automatic control of system, 2) Tubular reactor specially-designed for heavy heat flux and prevention of coking, 3)Recirculation of heavy fraction for prevention of wax formation, and 4) continuous removal & re-reaction of sludge for high yield of main product (oil) and minimization of residue. The advantages of the process are full automation, continuous operation, no requirement of catalyst, minimization of coking and sludge problems, maximizing the product(fuel oil) yield and purity, low initial investment and operation costs and environment- friendly process. In this presentation, background of pyrolysis technology development, the details of KIER pyrolysis process flow, key technologies and the performances of the process will be discussed in detail.

• Journal of the Korean Society of Tobacco Science
• /
• v.37 no.1
• /
• pp.18-24
• /
• 2015

Urinary mutagenicity is widely recognized as a useful biomarker for the assessment of mutagen exposure level in human. In this study, we optimized the several parameters affecting the activity of Urinary mutagenicity using highly sensitive mutation test(microsuspension assay) instead of the conventional Ames test. First of all, we chose YG1024 as a highly sensitive strain from three str ains of Salmonella typhimurium(TA98, TA100, YG1024) using r epr esentative mutation substances, such as Benzo[a]pyrene, 2-Aminonaphthalene, 2-amino-3-methyl-9H-pyrido[2,3-b]indole($MeA{\alpha}C$) and cigarette total particulate matter(TPM). And we established the several kinds of test conditions such as number of bacter ia, concentr ation of metabolic activation system and incubation time for the most sensitive reaction. Also, we optimized efficient pre-treatment method using commercial C18 column. As a r esults, this method was shown a aver age of 94 % recovery value and 13 % relative standard deviation. When we compared the Urinary mutagenicity between several participants, we confirmed that compar ative measurements were possible for different levels of urine mutagenicity. In conclusion, the optimized highly sensitive mutation test to measure the Urinary mutagenicity may be useful in biological monitoring of mutagen exposure level.

• Korean Journal of Veterinary Research
• /
• v.32 no.3
• /
• pp.429-434
• /
• 1992

This study was carried out to develop an effective liquid-phase double antibody enzyme immunoassay for determining of progesterone. The optimum conditions of assay system, 1st and 2nd antibodies, enzyme conjugate, and time reaction were invested. The bovine plasma progesterone level in dairy cattle and korean native bulls were also analyzed. The results obtained were as follows; 1. The reproducibility of petroleum ether was superior to that of ethyl ether as extract solvent of progesterone in plasma. 2. The optimum dilution rate of 1st and 2nd antibody was 30,000 and 10 times, respectively. Affer the reaction of enzyme conjugate to progesterone 1st antibody, and then 2nd antibody competition reaction was enough for over 1hr. 3. Average plasma progesterone level in 4 pregnant and 9 nonpregnant Holstein was $2.5{\pm}0.5$ and $0.7{\pm}0.2ng/m{\ell}$, respectively. Average plasma progesterone level of 10 Korean native bulls was $0.1{\pm}0.001ng/m{\ell}$ From these results, by using liquid phase double antibody enzyme immunoassay for progesterone is applicable to detect of early pregnancy diagnosis, factorial analysis of reproductive disorder, and also reproductive physiological function such as monitoring of cyclicity during the post-partum period.