• Journal of the Korean institute of surface engineering
• /
• v.56 no.3
• /
• pp.180-184
• /
• 2023

Scholars have proposed wafer-level bonding and three-dimensional (3D) stacked integrated circuit (IC) and have investigated Cu-Cu bonding to overcome the limitation of Moore's law. However, information about quantitative Cu-Cu direct-bonding conditions, such as temperature, pressure, and interfacial adhesion energy, is scant. This study determines the optimal temperature and pressure for Cu-Cu bonding by varying the bonding temperature to 100, 150, 200, 250, and 350 ℃ and pressure to 2,303 and 3,087 N/cm². Various conditions and methods for surface treatment were performed to prevent oxidation of the surface of the sample and remove organic compounds in Cu direct bonding as variables of temperature and pressure. EDX experiments were conducted to confirm chemical information on the bonding characteristics between the substrate and Cu to confirm the bonding mechanism between the substrate and Cu. In addition, after the combination with the change of temperature and pressure variables, UTM measurement was performed to investigate the bond force between the substrate and Cu, and it was confirmed that the bond force increased proportionally as the temperature and pressure increased.

• Korean Chemical Engineering Research
• /
• v.54 no.1
• /
• pp.89-93
• /
• 2016

In this study, we investigated the separation behavior of the anticancer agent paclitaxel and its semi-synthetic precursor 10-deacetylpaclitaxel (10-DAP) from plant cell cultures. As a result of sequential separation/purification performed by biomass extraction with solvent, liquid-liquid extraction, adsorbent treatment, hexane precipitation, and fractional precipitation, the adsorbent treatment was found to be the most effective in separating and recovering 10-DAP from paclitaxel. The optimal adsorbent type, crude extract/adsorbent ratio, and adsorbent treatment temperature were sylopute, 1:1.5 (w/w), and $20^{\circ}C$, respectively. The separation/recovery of 10-DAP from paclitaxel was 74.1% in adsorbent treatment process under optimal conditions.

• The Journal of Korean Medicine
• /
• v.26 no.4
• /
• pp.62-73
• /
• 2005

Objectives: This study was designed to identify the ergogenic effects of Red ginseng and Paeonia radix mixtures and optimal ratios. Materials and Methods: This study was conducted by administering treatments of Red ginseng and Paeonia radix mixtures to rats and by measuring the time to exhaustion by treadmill running. Results: The treatment of Red ginseng and Paeonia radix mixtures to the rats increased the time to exhaustion by treadmill running. The most potent inhibition of Red ginseng and Paeonia radix mixtures on the 5-HT synthesis and the TPH expression in the dorsal raphe was observed at the dose of 200 mg/kg and the optimal ratio of Red ginseng and Paeonia radix for the maximum efficacy was 50:50. Under normal conditions (not exercise), long-term treatment of Red ginseng and Paeonia radix mixtures did not affect the 5-HT synthesis and the TPH expression in the dorsal raphe, suggesting that Red ginseng and Paeonia radix mixtures does not alter serotonin level in the normal rats. The suppressive effect of Red ginseng and Paeonia radix mixtures on the 5-HT synthesis and the TPH expression during exercise is a possible ergogenic mechanism of these mixtures. Conclusions : Red ginseng and Paeonia radix mixtures reduce exercise-induced fatigue, and have the effect of acting as ergogenic aids on the time to exhaustion by treadmill exercise and on 5-HT synthesis and TPH expression.

• Environmental Engineering Research
• /
• v.20 no.4
• /
• pp.377-382
• /
• 2015

The high concentration of nitrogen and phosphorus in wastewater incorporated with the ability to use carbon dioxide as the carbon source make the microalgae become more attractive in wastewater treatment process. This study evaluates the optimal conditions for the digestion of settelable solids from the recirculating aquaculture system to produce the biomass of the green microalga Scenedesmus sp. After solids separation, aerobic digestion of settleable solids under disperse condition produced nitrate as the final product of consequently ammonification and nitrification processes. With the optimal digestion procedure, nitrate concentration during aerobic digestion in 2000 mL vessel increased from $9.63{\pm}0.65mg\;N/L$ to $58.66{\pm}0.06mg\;N/L$ in 10 days. Thereafter, cultivation of Scenedesmus sp. was performed in 1000 mL Duran bottle with air bubbling. The highest Scenedesmus sp. specific growth rate of $0.321{\pm}0.01/d$ was obtained in treatment using liquid fraction after aerobic digestion as the whole culture medium for Scenedesmus sp. cultivation. With this study, digestion of $8,800{\pm}128.12mg\;dry\;weight/L$ of settleable solids from fish pond finally produced $1,235{\pm}21mg\;dry\;weight/L$ of Scenedesmus sp. biomass.

• Journal of Plant Biology
• /
• v.34 no.4
• /
• pp.283-288
• /
• 1991

This work was carried out to determined the effect of 2,4-dinitrophenol(DNP) on in vivo nitrate reductase activity in the root of 6 day old rye (Secale cereale L.) seedlings. The nitrate reductase activity in the roots of 6 day old rye seedlings pretreated with 0.5 mM DNP was higher than that of the control group in all the experimental conditions. The optimal concentration of KNO3 for maximum nitrate reductase activity was 10 mM in both control and treated group. The nitrate reductase activity in the treatment of 10 mM KNO3 gradually increased for 4 h in both groups, and then maintained constantly. The nitrate reductase activity occurred per hour was highest at 1 h in both groups, while it was declined by large degrees as time goes on. The daily pattern of nitrate reductase activity was gradually decreased in both groups with the passage of day. The optimal pH for this experiment and a previous paper (Kwon et al., 1991), it was determined that the nitrate reductase activity in both roots and shoots of rye seedlings was increased by the treatment of 0.5 mM DNP, and particulary in both groups, the nitrate reductase activity in the roots of rye seedlings was higher than that in shoots of them.

• Journal of Korean Society on Water Environment
• /
• v.30 no.5
• /
• pp.559-567
• /
• 2014

Since the ocean dumping of organic wastes is prohibited under the London Convention, the need for land treatment of food waste leachate (FWL) has significantly been growing in recent years. This study was conducted to use thermal solubilization to turn FWL into a form that can easily be degraded during the anaerobic digestion process, thereby reducing the percentage of solids and increasing the production of methane. To derive the optimal operating conditions of thermal solubilization, a laboratory-scale reactor was built and operated. The optimal reaction temperature and time turned out to be $190^{\circ}C$ and 90 min, respectively. The BMP test showed a methane production of 465 mL $CH_4/g$ $COD_{Cr}$ and a biodegradation rate of 90.1%. The production of methane rose by about 15%, compared with no the application of thermal solubilization. To reduce the solid content of FWL and improve the methane production, therefore, it may be helpful to apply thermal solubilization to pre-treatment facilities for anaerobic digestion.

• Korean Journal of Environmental Biology
• /
• v.19 no.1
• /
• pp.87-92
• /
• 2001

For the biological treatment of industrial wastewater containing high concentration of phenol, isolation and characterization of phenol - degrading bacterium were carried out. A bacterial strain P2 capable of degrading phenol was isolated from contaminated soils by enrichment culture technique and identified as the genus Rhodococcus by morphological, cultural, biochemical characteristics, and Biolog system. The optimal medium composition and cultural conditions for the growth and degradation of phenol by Rhodococcus sp. P2 were 0.1% of (NH$_4$)$_2$SO$_4$, 0.2% of KH$_2$PO$_4$, 0.25% of Na$_2$HPO$_4$ㆍ12$H_2O$, 0.2% of MgSO$_4$ㆍ7$H_2O$, and 0.008% of CaC1$_2$ㆍ2$H_2O$ along with initial pH 8.5 at 3$0^{\circ}C$. Rhodococcus sp. P2 could grow with phenol as the sole carbon source up to 1,800 ppm in batch cultures, but did not grow in medium containing above 2,000 ppm of phenol. When 800 ppm phenol was given in the optimal media, Rhodococcus sp. P2 completely degraded it within 24 h. Meanwhile, 1,800 ppm of phenol was degraded within 9 days. Rhodococcus sp. P2 could utilize toluene, n-hexane, xylene and benzene as sole carbon source .

• Journal of the Korean Society for Heat Treatment
• /
• v.35 no.1
• /
• pp.27-32
• /
• 2022

Microbubble technology has been widely applied in various industrial fields. Recently, research on many types of microbubble application technology has been conducted experimentally, but there is a limit in deriving the optimal design and operating conditions. Therefore, if the computational fluid dynamics (CFD) analysis of multiphase flow is used to supplement these experimental studies, it is expected that the time and cost required for prototype production and evaluation tests will be minimized and optimal results will be derived. However, few studies have been conducted on multiphase flow CFD analysis to interpret fluid flow in microbubble generators using swirl flow. In this study, CFD simulation of multiphase flow was performed to analyze the air-water mixing process and fluid flow characteristics in a microbubble generator with a dual-chamber structure. Based on the simulation results, it was confirmed that a negative pressure was formed on the central axis of rotation due to the strong swirling flow. And it could be seen that the air inside the suction tube was introduced into the inner chamber of the microbubble generator. In addition, as the high-speed mixed fluid collided with external water sucked by the negative pressure near the outlet, a large amount of microbubbles was ejected due to the shear force between the two flows flowing in opposite directions.

• Environmental Sciences Bulletin of The Korean Environmental Sciences Society
• /
• v.10 no.S_4
• /
• pp.165-172
• /
• 2001

We investigated the optimal experimental conditions and reaction kinetics for the decompositions of PCE, TCE, naphthalene, and chloroform using conventional Fenton oxidation process. Additionally, the influence of pH on the decompositions of PCE was also evaluated. The results indicated that the optimal pH value was around 3. The dosage of Fenton's reagent and the molar ratio of hydrogen peroxide to ferrous ion for an approximately complete decomposition was found to depend on the properties of the organic compound. Due to their unsaturated structures, the results show that PCE, TCE, and naphthalene could be all effectively decomposed by Fenton's reagent oxidation. Their unsaturated structures could be mostly destoyed within first 1-2 minutes at a low dosage with an certain molar ratio of hydrogen peroxide to ferrous ion. However the saturated compound such as chloroform was more difficult to decompose even with a relatively high dosage of Fenton's reagent.

• Journal of Plant Biology
• /
• v.23 no.2
• /
• pp.49-54
• /
• 1980

The optimal conditions for the protoplast isolation from the leaves of pea (Pisum sativum L. cv. Sparkle) and barley (Hordeum vulgare L. cv. Baecdong) were determined in order to achieve a somatic hybridization between two species. It was revealed that the use of 0.5M sorbitol as an osmoticum was appropriate for pea. The yield of intact protoplasts was the highest (40%) when pea leaves were incubated in the enzyme solution for 4 hours. In case of barley, the optimal concentrations of cellulase, pectinase and mannitol as the enzyme solution were 2%, 1% and 0.35M, respectively. And the yield of barley protoplasts was the highest(87%) when leaves were incubated in this enzyme solution for 3.5 hours. A fusion of protoplasts from pea and barley was induced by PEG treatment enriched with calcium salts within 60 minutes.