• Management Science and Financial Engineering
• /
• v.1 no.1
• /
• pp.1-19
• /
• 1995

In this paper, we analyze an M / M / 1 queueing system where there are incentive conflicts among customers. Self-interested customers' decisions whether to join the system or not may not necessarily induce a socially optimal congestion level. As a way to alleviate the over-congestion, toll imposition was used in Naor's paper [3]. Instead of using a toll mechanism, we study the usefulness of imperfect information on system state (queue size, for example) as a way to reduce the over-congestion by self-interested customers. The main conclusion of this paper is that by purposefully giving fuzzy or imperfect information on the current queue size we can improve the congestion in the system. This result might look contradictory to rough intuition since perfect information should give better performance than imperfect information. We show how this idea is verified. In deriving this result, we use the concept of Nash equilibrium (pure and mixed strategy) as introduced in game theory. In some real situations, using imperfect information is easier to apply than imposing a toll, and thus the result of this paper has practical implications.

• International Journal of Highway Engineering
• /
• v.17 no.3
• /
• pp.97-105
• /
• 2015

PURPOSES : The Toll Collection System (TCS) operated by the Korea Expressway Corporation provides accurate traffic counts between tollgates within the expressway network under the closed-type toll collection system. However, although origin-destination (OD) matrices for a travel demand model can be constructed using these traffic counts, these matrices cannot be directly applied because it is technically difficult to determine appropriate passenger car equivalent (PCE) values for the vehicle types used in TCS. Therefore, this study was initiated to systematically determine the appropriate PCE values of TCS vehicle types for the travel demand model. METHODS : To search for the appropriate PCE values of TCS vehicle types, a traffic demand model based on TCS-based OD matrices and the expressway network was developed. Using the traffic demand model and a genetic algorithm, the appropriate PCE values were optimized through an approach that minimizes errors between actual link counts and estimated link volumes. RESULTS : As a result of the optimization, the optimal PCE values of TCS vehicle types 1 and 5 were determined to be 1 and 3.7, respectively. Those of TCS vehicle types 2 through 4 are found in the manual for the preliminary feasibility study. CONCLUSIONS : Based on the given vehicle delay functions and network properties (i.e., speeds and capacities), the travel demand model with the optimized PCE values produced a MAPE value of 37.7%, RMSE value of 17124.14, and correlation coefficient of 0.9506. Conclusively, the optimized PCE values were revealed to produce estimates of expressway link volumes sufficiently close to actual link counts.

• Journal of Korean Society of Transportation
• /
• v.24 no.2 s.88
• /
• pp.31-41
• /
• 2006

The main purpose of this paper is to develop the practical method to estimate the congestion price in odor to overcome the difficulty of traditional microeconomics approach for demand and cost function concepts. In this paper, we estimate the theoretical congestion toll which reflecting the real traffic conditions such as a speed-density functions using a traffic engineering methods We calculates the optimal congestion toll based on the real traffic conditions assuming that the electronic road pricing (ERP) systems ave installed for the study road. After evaluating the various speed-density relationship methods. we found that the Drake model is best suited for the Gangbyeon Expressway Using the Drake model, the optimal congestion toll will be 94 to 3,255 Won for the traffic speed between 44km/h to 68 km/h based on wage rate method and 107 to 6,381 Won for the marginal substitution method for the Gangbyeon Expressway in city of Seoul, Korea.

• Journal of Korean Society of Transportation
• /
• v.22 no.5
• /
• pp.139-149
• /
• 2004

As the expansion of road capacity has become impractical in many urban areas, congestion pricing has been widely considered as an effective method to reduce urban traffic congestion in recent years. The principal reason is that the congestion pricing may lead the user equilibrium (UE) flow pattern to system optimum (SO) pattern in road network. In the context of network equilibrium, the link tolls according to the marginal cost pricing principle can user an UE flow to a SO pattern. Thus, the pricing method offers an efficient tool for moving toward system optimal traffic conditions on the network. This paper proposes a continuous network design program (CNDP) in network equilibrium condition, in order to find optimal congestion toll for maximizing net economic benefit (NEB). The model could be formulated as a bi-level program with continuous variable(congestion toll) such that the upper level problem is for maximizing the NEB in elastic demand, while the lower level is for describing route choice of road users. The bi-level CNDP is intrinsically nonlinear, non-convex, and hence it might be difficult to solve. So, we suggest a heuristic solution algorithm, which adopt derivative information of link flow with respect to design parameter, or congestion toll. Two example networks are used for test of the model proposed in the paper.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.18 no.9
• /
• pp.2225-2233
• /
• 1994

In order to improve the cutting ability of face mill, a model for optimal cutter shape was developed to minimize resultant cutting force by combing cutting force model and optimal technique. Wear test and surface roughness test for optimized and conventional cutter were performed. The new optimized cutter shows longer tool life of 2.29 times than conventional cutter in light cutting condition and 2.52 times in heavy cutting condition. The surface roughness of workpiece by optimized cutter is improved in heavy cutting condition, but deteriorated in light cutting condition in comparison with conventional cutter. The surface profiles of workpiece were analyzed by Fourier transformation. The distribution of cut lay left on workpiece by optimized cutter is more regular than that by the conventional cutter.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.12 no.2
• /
• pp.1-11
• /
• 2013

This research proposed integrated expressway traffic management strategy using ramp metering and toll mainline metering. This research suggested a traffic signal optimization model for integrated operation of ramp and mainline metering based on Demand-Capacity Model that is used to optimize allowable input volume for ramp metering in FREQ model. The objective function of this model is sectional throughput volume maximization, and this model can calculate optimal signal timings for mainline metering and ramp metering. This study conducted an effectiveness analysis of integrated metering strategy using PARAMICS and its API. It targeted Seoul's Outer Ring Expressway between Gimpo and Siheung toll gate. As a simulation result, integrated operation of mainline and ramp metering provided more smooth traffic flow, and throughput volume of mainline increased to 14% in congested section. In addition, a queue of 400 meter was formed at metering point of toll gate. This research checked that integrated traffic management strategy facilitates more efficient traffic operation of mainline and ramp from diffused traffic congestion.

• Journal of Korean Society of Transportation
• /
• v.27 no.2
• /
• pp.145-155
• /
• 2009

This paper compares the relative performances of area and cordon tolls as opposed to the first-best congestion tolls with respect to alleviation of traffic congestion and social welfare. The comparison is done in the monocentric city where all the jobs are located at the city center. The study shows that the size of charging zones is similar in the two second-bests, but that the optimal toll level is higher in area pricing than in cordon pricing. Area pricing schemes turn out to perform better than cordon pricing schemes as measured by average speeds and daily average travel time. Accordingly, the former is shown to increase the social welfare more than the latter. In the case of the cordon tolls, the residents at the charging zones are exempted from the tolls. In this way, cordon tolls invite people into the most congested areas over the optimal level while partially negating the whole spirit of the congestion tolls.

• Journal of Korean Society of Transportation
• /
• v.32 no.6
• /
• pp.675-685
• /
• 2014

This paper develops a differentiated pricing strategy over each segment of expressways based on the second-best pricing method for reducing congestion. To this end, a bi-level problem is proposed, in which the upper level of the model is formulated to determine toll level of each segment for minimizing traffic congestion, whereas the lower level of the model is formulated as a variable demand assignment problem. The sensitivity analysis based algorithm is took placed to find optimal solutions of upper level model. An application of the proposed model uses the modified Sioux-Falls network. The results show that the segment-based differentiated pricing strategy performs better than the existing uniform pricing strategy in reducing traffic congestion. This study can be applied as a demand management method to relieve disutility of excessively congested segments of expressways.

• Proceedings of the KSME Conference
• /
• 2001.11a
• /
• pp.753-759
• /
• 2001

The purpose of this study is to suggest the machining technique of the constant control of cutting speed in order to improve precision machining and tool life in high speed machining using ball end mill. Cutting speed is changed in machining free form surface like free form surface. So, we don't have supreme surface form and toll life on machining. The way to solving this problem is that we should be settled to optimal cutting speed in free form surface machining. And, to improve precision machining is executed high speed machining method to output optimum NC data with developed constant control of cutting speed program after modeling of CAD/CAM. In this paper, a comparison was made of the cutting precision and tool life in conventional cutting and those in free form surface machining applying the program developed.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2005.10a
• /
• pp.239-242
• /
• 2005

In the roll forming, a flat strip is progressively deformed by feeding it through a series of rotating rolls. There are various layouts for the tube toll-forming stages. The process sequences are as follows: leveling, roll-forming, welding, bead removing, seam annealing, cooling, sizing and cutting. Electric resistance welded(ERW) tubes have been widely used for the machinery parts, especially for hydroformed automotive parts. However conventional ERW tubes do not have a high formability because of hardening of welded portion by rapid cooling. Moreover the decrease in thickness of the welded portion during the grinding of the inner and outer bead may reduce the formability of the tube. In case of applying the tubular parts without grinding the bead, the flow of the fluid can be prevented due to the turbulent flow induced by the inner bead. In attempt to determine the optimal bead grinding amount in the roll forming process, in the present paper, the effects of the removal depth and width of the inner beads on the hydroformability are analyzed by the finite element simulation.