• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.50 no.5
• /
• pp.473-480
• /
• 2017

We investigated the nutritional characteristics of the uncooked Skipjack tuna Katsuwonus pelamis frame (U-STF) as a basic resource for preparing flavor-enriching concentrates. The bone rate based on the fish frame (FF) was 53.2% in U-STF, thus lower than those of cooked skipjack tuna frame (C-STF), the uncooked salmon frame (U-SF), and beef leg bone (BLB). The composition of FF had 48.6-58.0% moisture, 18.4-21.3% crude protein, 7.0-15.0% crude lipid, and 12.8-22.1% ash. Compared to the proximate composition of BLB, that of FF was higher moisture and crude protein but lower solids, crude lipids, and ash. The total amino acid contents of FF was 17.6-20.8 g/100 g, which was higher than that of BLB. The levels of calcium and phosphorus of FF were 4.7-8.5 g/100 g and 2.4-4.2 g/100 g, respectively, thus lower than those of BLB. The brix concentration of FF extract was $5.0-8.2^{\circ}$, being highest in U-STF extracts, followed by extracts of U-SF and then extracts of C-STF. Our results indicate that U-STF is an optimal resource for preparing flavor-enriching concentrates.

• Korean Journal of Soil Science and Fertilizer
• /
• v.49 no.4
• /
• pp.388-392
• /
• 2016

The objectives of fertilizer recommendation are to prevent the application of excessive fertilization and to produce target yields. Also, optimal fertilization is important because crop quality can be influenced by fertilization. In this study, yields and fertilizer use efficiency of Taro (Colocasia esculenta Schott) were evaluated in different level of NPK fertilization. N, P and K fertilizer application rates were 5 levels (0, 50, 100, 150, 200%) by practical fertilization ($N-P_2O_5-K_2O=180-100-150kg\;ha^{-1}$), respectively. In the N treatment, the yields of Taro tuber were about $33Mg\;ha^{-1}$ from 90 to $360kg\;ha^{-1}$ N fertilization. However, the ratio of tuber to total biomass decreased with increasing N fertilization rate. In the P and K treatments, yields of Taro tuber were the highest at $150kg\;ha^{-1}$ fertilization. Fertilizer use efficiency was decreased by increase of N and K fertilization. Crude protein of Taro tuber was the highest at practical fertilization. Sucrose content of tuber was influenced by phosphate application.

• Asian-Australasian Journal of Animal Sciences
• /
• v.19 no.3
• /
• pp.381-385
• /
• 2006

This study examined the influence of re-growth periods on chemical composition, biomass production, nutritive value and digestion kinetics of Setaria sphacelata (SS) and Cenchrus ciliaris (CC) in ruminally cannulated buffalo bulls. Two re-growth intervals i.e. clipping every month ($CI_1$) and clipping after every two months ($CI_2$) were compared with the control (clipped after 4 months). Mean values of leaf to stem ratio in SS and CC grasses were decreased (p<0.05) with increasing re-growth interval. The lowest leaf to stem ratio was recorded in control plots of both grasses. In both grasses, increasing growth period increased the concentrations of dry matter (DM), neutral detergent fiber (NDF) and organic matter (OM) and decreased crude protein (CP). Mean dry herbage, OM and CP yields of SS and CC were increased (p<0.05) with increasing re-growth interval. Ruminal DM and NDF digestibilities of SS and CC were decreased (p<0.05) with increasing interval. Ruminal rate of DM and NDF disappearance was higher while the ruminal lag time of these nutrients was lower with monthly than with bi-monthly clipping interval. The results from present study imply that SS and CC clipped after every two months is more beneficial than when clipped every month or every four months in terms of optimal biomass with adequate nutritional value for buffaloes.

• Journal of Microbiology and Biotechnology
• /
• v.16 no.3
• /
• pp.374-380
• /
• 2006

In this study, glucose, sucrose, and dextrin were found to be better carbon sources for the production of pullulan by Aureobasidium pullulans HP-2001. Maximal production of pullulan with 200 g/l sucrose as a carbon source was 54.2 g/l. The highest yield of pullulan from sucrose was 0.40, when the sugar concentration was 100 g/1. Optimal conditions for the continuous production of pullulan by A. pullulans HP-2001 in a 7-1 bioreactor were determined by studying the effects of composition of feed solution, dilution rate, and concentration of sucrose in the feed solution. Pullulan concentration and productivity with 100 g/l glucose and 2.5 g/l yeast extract were 38.1 g/l and 0.53 g/l h for 72 h, respectively, in a batch culture of A. pullulans HP-2001. When the substituted medium contained 100 g/l sucrose, 2.5 g/l yeast extract, and mineral salts, which is the same composition as the medium for the production of pullulan, the pullulan concentration and productivity were 74.9 g/l and 0.55 g/l h for 120 h, respectively. The production of pullulan at the steady state increased with a dilution rate up to 0.015/h, and its concentration was 78.4 g/l with a weight average molecular weight ($M_w$) of $4.0{\times}10^5$. Unlike a batch culture, however, the decline of the $M_w$ and the number average molecular weight ($M_n$) of pullulan was not found in the continuous culture of A. pullulans HP-2001. When the concentration of sucrose in the feed solution was 200 g/l, 113.5 g/l of pullulan was obtained at the steady state. The steady state was maintained longer in the continuous culture fed with the feed solution containing 200 g/l sucrose than when fed with the feed solutions containing either 100 or 150 g/l sucrose.

• Journal of Food Hygiene and Safety
• /
• v.31 no.6
• /
• pp.406-413
• /
• 2016

This study was performed to evaluate and establish a sample preparation method for the detection of food-borne pathogens in animal origin foods. Ham, yogurt, and Korean beef inoculated with Escherichia coli O157:H7, Staphylococcus aureus, and Salmonella Typhimurium, were tested for the effects of diluent composition, processing time, and proportion of diluent to sample. The diluents used were peptone water (PW), Saline solution (SS), Butterfield's phosphate buffered dilution water (BPD), and Buffered peptone water (BPW). The processing time periods considered for the samples were 30, 60, 90, 120, and 300 sec, and the proportions of diluent to samples tested were 1:2, 1:4, 1:9, and 1:19. Yogurt and beef showed the highest number of bacteria when treated with BPW (p < 0.05). However, ham showed no significant difference between the treatments with four different diluents. Optimum proportions of diluent to ham, yogurt, and beef were 1:9, 1:2, and 1:4, respectively. The processing time of 120 sec was chosen as optimum, because it showed the best recovery rate in all sample types. In this manner, detection of food-borne bacteria with the selected optimal conditions was indicated by a recovery rate of more than 85%. These data suggest that an appropriate diluent composition and diluent volume should be used depending on the type of sample, which would thereby increase the accuracy of detecting food-borne bacteria in animal origin foods.

• Resources Recycling
• /
• v.29 no.3
• /
• pp.51-60
• /
• 2020

This study was carried out to get the optimum conditions for manufacturing high refractive glass beads from waste fluorescent lamp glass. Chemical composition, X-ray diffraction pattern, particle size distribution, refractive index of glass beads, and the effect of air mixing ratio and ejection rate were investigated. The obtained results are as follows. The X-ray diffraction pattern and chemical composition of glass beads made of waste fluorescent glass are similar to common glass except ReO₂ 0.0108 wt%, BaO 0.071 wt%, NiO 0.0039 wt% and CaO 7.8 wt% but 11.7 wt% of common glass. The glass beads made of waste fluorescent lamp glass have the narrower particle size distribution of and the higher refractive index than the glass beads made of common glass. The optimal conditions of kiln operation for manufacturing glass beads from waste fluorescent lamp glass are 20 m/sec of ejection rate, 1.7 of air mixing ratio, and 940℃ of temperature.

• Korean Journal of Plant Resources
• /
• v.37 no.3
• /
• pp.263-269
• /
• 2024

Embryos of early-ripening peaches could not achieve physiological maturation or undergo abortion before harvest. Embryo rescue is an effective strategy to rescue embryos from early-ripening peaches. Thus, the current study was carried out to determine the appropriate developmental stage and optimal medium composition for embryo rescue in early-ripening peach. Development of open-pollinated 'Yumi' fruit was investigated from 20 to 90 days after full bloom (DAFB) to explore period occurring endocarp hardening. After endocarp hardening, embryo development was observed by light microscopes. Shoot and root meristems were observed at 65 DAFB and embryo size rapidly increased at 75 DAFB. Embryos collected at 75, 80, 85, and 90 DAFB were cultured on four media based on Driver and Kuniyuki (DKW) medium. Germination rate of embryos cultured on four media gradually increased from 75 to 90 DAFB and reached 100% at 90 DAFB. Notably, M3 medium (0.5 DKW supplemented with 6-benzylaminopurine (BAP) 1.0 ㎎/L) displayed the highest germination rate at 75 and 80 DAFB stages. Growth and development of shoot and root were pronounced in plantlet cultured at 90 DAFB stage. While delayed shoot growth was evident in plantlets cultured at 75, 80, and 85 DAFB stages, this retardation could be overcome through the application of growth regulators, particularly in M3 and M4 (0.5 DKW supplemented with BAP 1.0 ㎎/L and indole-3-butyric acid 0.5 ㎎/L) media. Remarkably, roots of plantlet grown in M4 medium exhibited limited elongation. In conclusion, germination rate of embryo and growth of embryo cultured plantlet can be enhanced by collecting seeds from early-ripening 'Yumi' at the 90 DAFB stage and conducting embryo culture using the M3 medium.

• Journal of Biosystems Engineering
• /
• v.41 no.4
• /
• pp.373-388
• /
• 2016

Background: Recent inquiries into high-quality foods have discussed the importance of the functional aspects of foods, in addition to traditional quality indicators such as color, firmness, weight, trimming loss, respiration rate, texture, and soluble solid content. Recently, functional Chinese cabbage, which makes up a large portion of the vegetables consumed in Korea, has been identified as an anticancer treatment. However, the investigation of practical issues, such as the effects of storage conditions on quality indicators (including functional compounds), is still limited. Purpose: We reviewed various studies on variations in the quality indicators and functional compounds of Chinese cabbage in response to different storage environments, focusing on storage temperature and storage period. In particular, we emphasized the effect of storage temperature and storage period on glucosinolate (GSL) levels, in order to provide guidelines for optimizing storage environments to maximize GSLs. Additionally, we used response surface methodology to propose experimental designs for future studies exploring the optimal storage conditions for enhancing GSL contents. Review: Large variations in quality indicators were observed depending on the cultivar, the type of storage, the storage conditions, and the harvest time. In particular, GSL content varied with storage conditions, indicating that either low temperatures or adequate air composition by controlled atmospheric storage may preserve GSL levels, as well as prolonging shelf life. Even though genetic and biochemical approaches are preferred for developing functional Chinese cabbage, it is important to establish a practical method for preserving quality for marketability; a prospective study into optimal storage conditions for preserving functional compounds (which can be applied in farms), is required. This may be achievable with the comprehensive meta-analysis of currently published data introduced in this review, or by conducting newly designed experiments investigating the relationship between storage conditions and the levels of functional compounds.

• Journal of the Korea Institute of Building Construction
• /
• v.3 no.1
• /
• pp.155-160
• /
• 2003

The Korean economic crisis hit badly the local construction industry, especially during the year of the 1998 when the country took the IMF bailout proframme. Under the poor business environment, such as reduction of construction investment, financial difficulty from high interest rate, and increasing bankruptcies, restructuring measures were repuired for survival of the industry. It is obvious the restructuring process is essential for the future business success. regardless of the financial crisis. With this background, this research aims the contribute to improved construction management structure and strengthened international competitiveness of the industry through the cost reduction and productivity enhancement, by analysising and proposing and optimal level of the manpower structure of construction management organization With the subject of 24 construction fields of apartment houses in the capital region as of January 1, 1999, constructed by OO company having leaded the construction industry of the country so far now, the researcher performed the on the spot survey regarding the organization/manpower structure and construction contract amount.

• Journal of the Korean Ceramic Society
• /
• v.41 no.6
• /
• pp.435-438
• /
• 2004

MOCVD is one of the major deposition techniques for Cu thin films and Ta-Si-N is one of promising barrier metal candidates for Cu with high thermal stability. Effects of hydrogen plasma pretreatment of the underlying Ta-Si-N film surface on the Cu nucleation in Cu MOCVD were investigated using scanning electron microscopy, X-ray photoelectron spectroscopy and Auger electron emission spectrometry analyses. Cu nucleation in MOCVD is enhanced as the rf-power and the plasma exposure time are increased in the hydrogen plasma pretreatment. The optimal plasma treatment process condition is the rf-power of 40 Wand the plasma exposure time of 2 min. The hydrogen gas flow rate in the hydrogen plasma pretreatment process does not affect Cu nucleation much. The mechanism through which Cu nucleation is enhanced by the hydrogen plasma pretreatment of the Ta-Si-N film surface is that the nitrogen and oxygen atoms at the Ta-Si-N film surface are effectively removed by the plasma treatment. Consequently the chemical composition was changed from Ta-Si-N(O) into Ta-Si at the Ta-Si-N film surface, which is favorable for Cu nucleation.