• Food Science and Preservation
• /
• v.18 no.6
• /
• pp.980-985
• /
• 2011

This study was conducted to determine the acetic-acid fermentation properties of apple juice (initial alcohol content, apple juice concentration, acetic-acid content, and inoculum size) in flask scale. At the acetic-acid fermentation of apple juice with 3, 5, 7, and 9% initial alcohol content, the maximum acidity after 10-day fermentation was 5.88% when the initial alcohol content was 5%. The acetic-acid fermentation did not proceed normally when the initial alcohol content was 9%. When the initial Brix was $1^{\circ}$, the acidity gradually increased, and the acidity after 12-day acetic-acid fermentation was 4.48%. Above 4% acidity was attained faster when the apple juice concentration was 5 and 10 $^{\circ}Brix$ than when it was 1 and 14 $^{\circ}Brix$. When the initial acidity was 1% or above (0.3, 0.5, 1.0, and 2.0%), the acetic-acid fermentation proceeded normally. The acetic-acid fermentation also proceeded normally when the inoculum sizes were 10 and 15%, and the acidity after eight-day acetic-acid fermentation was 5.60 and 6.05%, respectively. Therefore, the following were considered the optimal acetic-acid fermentation conditions for apple cider vinegar: 5% initial alcohol content, 5 $^{\circ}Brix$ or above apple juice concentration, 1.0% or above initial acidity, and 10% or above inoculum size. Apple cider vinegar with above 5% acidity can be produced within 48 h under the following acetic-acid fermentation conditions: 7% initial alcohol content, about 1% initial acidity, and 10% inoculum volume at $30^{\circ}C$, 30 rpm, and 1.0 vvm, using 14 $^{\circ}Brix$ apple juice in a mini-jar fermentor as a pre-step for industrial-scale adaptation.

• Korean Journal of Soil Science and Fertilizer
• /
• v.22 no.1
• /
• pp.61-66
• /
• 1989

Plants were exposed to different sub-optimal growth temperature regimes for hardening or sprayed with abscisic acid (ABA) before being placed at $10^{\circ}C$ for three days. Comparisons were made with non-treated plants for plant survival, photosynthetic activities and fatty acids composition of phospholipids. The level of endogenous ABA of the hardened seedlings was compared with that in control and ABA sprayed-seedlings. The results of the above experiment were summarized as follows: 1. Compared to non-treated plants, the hardening and ABA treatment resulted in higher plant survival rate and better seedling growth following earlier transplanting. The low temperature hardening which gradually increased the duration of the low temperature treatment at 2-day intervals was more effective than the controled temperature hardening which gradually decreased the temperature from $25^{\circ}C$ to $20^{\circ}C$ and $15^{\circ}C$. 2. The photosynthetic activities of rice leaves after 3-day exposure to $10^{\circ}C$ were higher in hardened and ABA sprayed seedlings than in non-treated plants. The root activities after low temperature treatment were also higher in hardened and ABA sprayed seedlings than in control. 3. Fatty acids of phospholipids in rice plants such as stearic acid and oleic acid were decreased and the highly unsaturated fatty acids, linoleic acid and lenolenic acid were increased by hardening or ABA treatments. It is assumed that the increase of cold tolerance in these plants was due to the higher ratio of unsaturated to saturated fatty acids. Respectively, the ratio was 1.86, 1.97 and 1.80 in plants given controled temperature hardening, the low temperature hardening and ABA treatments. While in control plants, it was 1.17. 4. ABA content in rice seedling given the low temperature hardening treatment was 67.2 ng/g F.W which was approximately twice that of non-treated control, which was 33.9 ng/f F. W., in contrast, the ABA content of the ABA treated seedlings was 91.7 ng/g F. W.

• Korean Journal of Soil Science and Fertilizer
• /
• v.44 no.5
• /
• pp.717-721
• /
• 2011

In case of plastic film greenhouses cultivating fresh vegetables on paddy soil, soil characteristics must be considered as more important factor than any other factors. Generally after the four years of cultivation, soils tend to increase electrical conductivity value, nutrient unbalance and soil pests. As a result, degradation of agricultural products occurred, therefore it is necessary to improve soil conditions. In this study, yield and economic cost of cucumber were analyzed. The best soil conditions for cucumber cultivation were alluvial or valley in soil topology, moderately or poorly drainage in soil drainage classes, coarse loamy soil in texture. In addition, rich-sunlight and-deep groundwater would be proper for the cucumber cultivation. Good environmental managements of plastic film greenhouse were as follows. The temperature needed to be adjusted three times. The optimal daytime temperature could be $22{\sim}28^{\circ}C$, the one from 12 until night could be $14{\sim}15^{\circ}C$, and the temperature from 24 to sunrise could be $10{\sim}12^{\circ}C$. During plant growth period, soil moisture content was as low as 10~15%, and it needed to be maintained as 15~20% during reproductive growth period. To control pests, catch crop cultivation and solar treatment were carried out, after those EC was reduced and the root-knot nematode was controled too. Cucumber yield from the plot with improved soil managements increased to $158.4Mg\;ha^{-1}$, but plot with successive cropping injury yielded $140.3Mg\;ha^{-1}$. The income from the plot with improved soil managements was 215,676 thousand won $ha^{-1}$, the plot with successive cropping injury was 131,649 thousand won $ha^{-1}$. Income rate of each plot was 51.8% and 38.4%, respectively.

• Korean Journal of Soil Science and Fertilizer
• /
• v.43 no.6
• /
• pp.923-929
• /
• 2010

This study was conducted to investigate the relations between soil chemical properties and Korean raspberry (Rubus coreanus Miq.) growth. Soils were collected from 54 sampling sites in 1 to 6 years old Korean raspberry cultivation fields (RCFs) at Gochang-gun, Jeollabuk-Do, Korea. In RCF with two to six years old plants, soil pH and exchangeable $Ca^{2+}$ and $Mg^{2+}$ contents were higher at the leaf-emergence time, but EC, available phosphorus content, CEC, and total nitrogen content were higher at the harvesting time; especially at the harvesting time, the content of available phosphorus in the RCF with 3~6 years old plants were at least three times higher than in the RCF with 2 years old plants. Water-soluble anions ($Cl^-$, ${NO_3}^-$, ${PO_4}^{2-}$, and ${SO_4}^{2-}$) in the RCF were also measured. The contents of ${NO_3}^-$ and ${SO_4}^{2-}$ were always higher in the RCF with older plants than in the RCF with younger plants, which were not affected by sampling time and sampling locations (rhizosphere and non-rhizosphere sites). However, soils collected from non-rhizosphere at the leaf-emergence time contained higher ${PO_4}^{2-}$ content, but $Cl^-$ content was higher in the soils collected from rhizosphere at the harvesting time. In general, soils in the RCFs contained excess amounts of inorganic nutrients such as available phosphorus and exchangeable $K^+$. Thus, optimal levels of soil properties for Korean raspberry cultivation should be reconsidered.

• Journal of Sericultural and Entomological Science
• /
• v.53 no.2
• /
• pp.82-86
• /
• 2015

This study was carried out to develop the silkworm rearing technique in unused mulberry leaves after harvesting mulberry fruit. The growth of Gwasang No. 2 and Suhyang was very good compared to control cultivar Chungil in leaves size and new branch growth, but new branch and leaves of Daeshim was similar or small to control cultivar Chungil. The number of leaves of Gwasang No. 2 and Suhyang was lower than Chungil, but weight of leaves per tree was heavyer than Chungil. Mulberry leaf yield was Gwasang No. 2 521 kg/10a, Suhyang 189 kg/10a, Daeshim 73 kg/10a, Chungil 1,095 kg/10a. Content of mineral element of all three mulberry cultivars leaf for mulberry fruit production was higher than Chungil in N, P, K, Ca etc. Feeding quantity of silkworm of Gwasang No. 2 and Suhyang was much more than Chungil. Feeding quantity was highest at Suhyang in 96 kg/box. Growth duration of silkworm larvae was not different in all four mulberry culivars but weight of silkworms (5th instar 3rd day) was heavy at Gwasang No. 2 (2.07 g/head) and Suhyang (2.11 g/head) compared to control cultivar Chungil (1.92 g/head). Mortality of silkworms was 14.6% (Gwasang No. 2), 13.3% (Suhyang), 13.9% (Daesim), 12.6% (Chungil) and than higher at elder instar stage. The production amount of silkworm (5th instar 3rd day) was 35.4 kg/box (Gwasang No. 2), 36.6 kg/box (Suhyang), 35.0 kg/box (Daeshim), 33.6 kg/ box (Chungil). Amount of possible rearing silkworms was estimated 3.4box/10 a (Gwasang No. 2), 1.3box/10a (Suhyang), 0.5box/10a (Daeshim), 8.7box/10a (Chungil).

• Journal of the Korean Society of Radiology
• /
• v.15 no.6
• /
• pp.891-897
• /
• 2021

With the development of Amyloid PET Tracer, the accuracy of Alzheimer's diagnosis can be improved through the identification of beta-amyloid neurites. However, the long image acquisition time of 20 minutes can be difficult for the patient. PET/CT scans are sensitive to patient movement and may partially affect test results. In this study, we studied the proper image acquisition time without affecting the quantitative evaluation of the image through the list mode acquisition method according to the time of the distribution of radioactive drugs in the body. The list mode includes information about time compared to the existing frame mode, and it is easy to analyze data because it can reconstruct images about the time that researchers want. The research method obtained a reconstructed image by time using a list mode of 5min frame/bed, 10min frame/bed, 15min frame/bed, and 20min frame/bed to compare the difference between signal-to-pons take ratio (SNR) and lesion-to-pons uptake ratio (LPR) and the difference in reading time to obtain an appropriate image. As a result of quantitative analysis, when measuring in list mode, SUVmean values decreased in 6 regions of interest as the image acquisition time increased, but showed the largest difference in 5 min/bed images, followed by 10 min/bed and 15 min/bed. As a result, the difference in SUVmean values decreased. Therefore, it was found that SUVmean values at 15 min/bed did not differ enough to not affect image evaluation. There was no difference in LPR values. As a result of the qualitative analysis, there was no change in the reading findings according to the PET image acquisition time and there was no significant difference in the qualitative analysis score of the image reconstruction according to time. As a result of the study, there is no significant difference between 15 min/bed and 20 min/bed images during the ¹⁸F-flutemetamol PET/CT test, so it can be said that it is clinically useful to reduce the image acquisition time selectively using 15 min/bed via list mode depending on the patient's condition.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.66 no.3
• /
• pp.256-264
• /
• 2021

Rapeseed (Brassica napus L.) is generally sown in late autumn and harvested in early summer in Korea, however, spring cultivation has also been attempted in some areas because frequent climate changes induce reducing productivity. Therefore, there is a need for a transplanting technology that is relatively easy to control of cropping season according to changes in cultivation conditions. In this study, to find out the optimal characteristics of seedlings for machine transplanting of spring cultivation, seedling morphological characteristics were investigated according to the seedling age of three varieties for 2020 and 2021. The hypocotyl length was less than 2 cm in both years and the 40-day-old seedling was the shortest among all seedling ages. The number and size of leaf were increased with longer seedling age in both years. To evaluate seedling quality, total seedling length, seedling weight, and impact resistance were measured before transplanting. Total seedling length was the longest in 40-day-old seedlings and the shortest in 25-day-old seedlings in both years. In the case of seedling weight, no significant differences were observed depending on the seedling age and the impact resistance increased with increasing seedling age. Finally, 'Jungmo7001', 'Naehan', and 'Tamla' showed a high transplanting rate in seedlings grown for more than 30 days, 35 days, and 40 days, respectively, in the field using a general transplanter. These results suggest that the proper seedling age for transplanting is limited depending on the rapeseed varieties. The suitable seedling cultivation method can be selected for different cultivation environments.

• Journal of Bio-Environment Control
• /
• v.30 no.4
• /
• pp.419-428
• /
• 2021

In order to develope a mobile-based greenhouse energy calculation program, firstly, the overall thermal transmittance of 10 types of major covers and 16 types of insulation materials were measured. In addition, to estimate the overall thermal transmittance when the cover and insulation materials were installed in double or triple layers, 24 combinations of double installations and 59 combinations of triple installations were measured using the hotbox. Also, the overall thermal transmittance value for a single material and the thermal resistance value were used to calculate the overall thermal transmittance value at the time of multi-layer installation of covering and insulating materials, and the linear regression equation was derived to correct the error with the measured values. As a result of developing the model for estimating thermal transmittance when installing multiple layers of coverings and insulating materials based on the value of overall thermal transmittance of a single-material, the model evaluation index was 0.90 (good when it is 0.5 or more), indicating that the estimated value was very close to the actual value. In addition, as a result of the on-site test, it was evaluated that the estimated heat saving rate was smaller than the actual value with a relative error of 2%. Based on these results, a mobile-based greenhouse energy calculation program was developed that was implemented as an HTML5 standard web-based mobile web application and was designed to work with various mobile device and PC browsers with N-Screen support. It had functions to provides the overall thermal transmittance(heating load coefficient) for each combination of greenhouse coverings and thermal insulation materials and to evaluate the energy consumption during a specific period of the target greenhouse. It was estimated that an energy-saving greenhouse design would be possible with the optimal selection of coverings and insulation materials according to the region and shape of the greenhouse.

• Korean Journal of Ecology and Environment
• /
• v.54 no.3
• /
• pp.199-208
• /
• 2021

Environmental DNA (eDNA) metabarcoding is effective method with high detection sensitivity for evaluating fish biodiversity and detecting endangered fish from natural water samples. We compared the richness of operational taxonomic units(OTUs) and composition of freshwater fishes according to filters(cellulose nitrate filter vs. glass fiber filter), extraction kits(DNeasy2^® Blood & Tissue Kit vs. DNeasy2^® PowerWater Kit), primer sets (12S rDNA vs. 16S rDNA), and PCR methods (conventional PCR vs. touchdown PCR) to determine the optimal conditions for metabarcoding analysis of Korean freshwater fish. The glass fiber filter and DNeasy2^® Blood & Tissue Kit combination showed the highest number of freshwater fish OTUs in both 12S and 16S rDNA. Among the four types, the primer sets only showed statistically significant difference in the average number of OTUs in class Actinopterygii (non-parametric Wilcoxon signed ranks test, p=0.005). However, there was no difference in the average number of OTUs in freshwater fish. The species composition also showed significant difference according to primer sets (PERMANOVA, Pseudo-F=6.9489, p=0.006), but no differences were observed in the other three types. The non-metric multidimensional scaling (NMDS) results revealed that species composition clustered together according to primer sets based on similarity of 65%; 16S rDNA primer set was mainly attributed to endangered species such as Microphysogobio koreensis and Pseudogobio brevicorpus. In contrast, the 12S rDNA primer set was mainly attributed to common species such as Zacco platypus and Coreoperca herzi. This study provides essential information on species diversity analysis using metabarcoding for environmental water samples obtained from rivers in Korea.

• Korean Chemical Engineering Research
• /
• v.59 no.4
• /
• pp.548-556
• /
• 2021

This study was conducted to investigate the applicability of lignocellulosic fiber and coconut shell activated carbon (CSA) for the production of a particulate matter (PM)-reducing air-filter as raw materials to solve the environmental problems of non-woven fabrics. CSA had a good potential to use as a raw material of air-filter for reducing volatile organic compounds as well as noxious metals, and reduction capability of the CSA was 5 times higher than that of wood fiber. Natural adhesives formulated with proteinaceous wastes mostly were applied successfully to fabricate air-filters with the shape of fiberboard. The air-filter fabricated with the minimum target density of 200 kg/m³ and the maximum CSA-content of 40 wt% in fiberboard had a good manageable strength. However, the fiberboard filters was required to make vent-holes for improving an air-permeability of the filters. Size of the CSA particles was adjusted to greater than 2 mesh with the consideration of strength and formability of the fiberboard. Three-layers fiberboard that only wood fiber and the mixture of wood fiber and CSA were formed in the surface and middle layers, respectively, was determined to the optimal condition for the production of air-filters. In addition, traditional Korean paper handmade from mulberry trees (TKP) showed a good PM-reducing property as an air-filter. It is concluded that air-filtering set composed of fiberboard with vent-holes and TKP instead of conventional air-filters made with non-woven fabrics can be used as a filter for reducing the concentrations of PM, VOC and noxious metals existed in indoor and outdoor spaces.